epopchock

I just figured out how to make the traffic appear. The simulator wasn't reading the entry of the MyTraffic Professional folder correctly, and adding a missing line to the Scenery cfg. finally got the traffic to show up

I actually just thought of something: When I installed MyTraffic 6, and after activating it in the FSX Scenery Library, the entry may not have shown up in the FSX scenery config file. I'll check to see if that could be the cause and if it turns out not to be that, I could check the traffic file(s)

I removed all World of AI bgl. files and folders prior to installing MyTraffic 6, and even before the default trafficAircraft.bgl was renamed to OFF, neither default AI Traffic nor AI traffic associated with MyTraffic 6 (after install) was showing but I'll check if it's because of old FS9 Traffic bgls. and I'll let you know if that was the cause, unless you've got other suggestions for what I can try next

a long time ago, I had just the default traffic in my earlier years with Flight Simulator X, but after a while, I switched to World of AI which has been my main traffic package up to today, when I tried to operate MyTraffic 6 (I didn't mention before that I moved all World of AI files to a separate folder off of my flight simulator to avoid traffic conflicts). Second, I have used Ttools with some AI flight plans, but not with MyTraffic 6. Third, as mentioned before in my first post, MyTraffic 6 didn't display any AI traffic in ATL upon starting the simulator, despite all the traffic sliders being set above 0. I invested in MyTraffic 6 because it is the only AI traffic software that not only includes many of today's airlines, but also lets you fly with vintage traffic in the beginning of the jet era, and no other traffic package would offer me this. I should also add that with World of AI I have had to completely turn off traffic at certain Caribbean airports in order to avoid a crash to desktop (CTD) error, and I was told that MyTraffic should solve this issue. this combined with everything else is why I am determined to get this tool to work

to Bill10: sorry to post this twice. I was trying to quote your reply and the first attempt was unsuccessful

Hello everyone, I’m running FSX with MyTraffic Professional installed, but I’m running into a problem where no AI traffic is appearing at major airports (e.g., KATL at 12:00 local time). Here’s what I’ve checked so far: • Traffic sliders are set above 0. • MyTraffic is enabled in the Scenery Library and placed at the top of the priority list. • The MyTraffic aircraft folders (e.g., MT_A320, MT_B747, etc.) exist in `C:\MyTraffic Professional\MyTraffic\Aircraft`. • The SimObjectPaths entry in `fsx.cfg` correctly points to that folder. • Default `trafficAircraft.bgl` has been renamed to `.off` to avoid conflicts. • MyTraffic `.bgl` files (`Mytrafficcommercial.bgl`,`MytrafficGlobal.bgl` , etc.) are present in`C:\MyTraffic Professional\MyTraffic\Scenery`. • I even tried copying those `.bgl` files into `Scenery\World\Scenery`, but still no traffic appears. Despite all of this, FSX continues to show only my own aircraft—no AI traffic at all. I am turning to this forum for help because MyTraffic's forum is no longer available. Has anyone seen this behavior before, or know if there’s a version mismatch or corruption issue with MyTraffic’s traffic files? I’d appreciate any guidance or troubleshooting steps. Thanks in advance, Evan

I did, but am still waiting to hear back. any other suggestions on what I could try in the meantime?

I checked and that setting is on

I tried your suggestion, and this fix unfortunately didn't work and now the landing light just barely casts a thin, ropelike glow immediately in front of the aircraft but still doesn't illuminate the runway at all. Any other suggestions? Or should I contact the developer?

what do you mean by substituting the spotlight bmp? I don't quite understand what that has to do with this specific aircraft I am trying to solve the problem with Update: I also just realized that one of the images I posted above were only partially showing up after copying them, so I am gonna post it again: Screenshot 2025-02-09 124444.png Here's the effects, lights, and electrical sections from the A321 NEO config. [effects] wake=fx_wake water=fx_spray dirt=fx_tchdrt concrete=fx_sparks touchdown=fx_tchdwn, 1 [lights] light.0=3, -77.90, -0.15, 4.80, fx_navwhih light.1=2, -77.90, 0.15, 4.80, fx_strobeh light.2=1, 6.80, 0.00, -5.80, fx_beaconh light.3=1, 3.83, 0.00, 8.47, fx_beaconh light.4=4, 47.0, 0.00, 4.1, fx_vclighth , [electrical] ;BusType, MaxAmpLoad, MinVoltage BusTypes:0=MainBus,1=AvionicsBus,2=BatteryBus,3=HotBatteryBus,4-7=Generator/AlternatorBus(1-4) max_battery_voltage = 24 generator_alternator_voltage = 28 max_generator_alternator_amps = 200 electric_always_available = 1 flap_motor = 0, 5 , 17.0 gear_motor = 0, 5 , 17.0 autopilot = 0, 5 , 17.0 avionics_bus = 0, 0 , 17.0 avionics = 1, 0 , 17.0 pitot_heat = 0, 2 , 17.0 additional_system = 0, 0 , 17.0 marker_beacon = 1, 2 , 17.0 gear_warning = 0, 2 , 17.0 fuel_pump = 0, 5 , 17.0 starter1 = 0, 20 , 17.0 starter2 = 0, 20 , 17.0 light_nav = 0, 0 , 17.0 light_beacon = 0, 5 , 17.0 light_landing = 0, 5 , 17.0 light_taxi = 0, 5 , 17.0 light_strobe = 0, 5 , 17.0 light_panel = 0, 0 , 17.0 light_cabin = 0, 0 , 17.0 auto_brakes = 0, 0 , 17.0 standby_vacuum = 0, 0 , 17.0 hydraulic_pump = 0, 0 , 17.0 fuel_transfer_pump = 0, 0 , 17.0 light_recognition = 0, 0 , 17.0 light_wing = 0, 0 , 17.0 light_logo = 0, 0 , 17.0 directional_gyro = 0, 0 , 17.0 directional_gyro_slaving = 0, 0 , 17.0

https://1drv.ms/i/c/654bd515da3faae5/Eb1jxiO1sw5IsaOViIRQGjIBTSvl0G1bNFx1jqBN1mnJ2Q?e=lkhYwR https://1drv.ms/i/c/654bd515da3faae5/ETMl0_f4wORLlcymqngIsMABiXzU0Pmm1xKXHX32K3cJCw?e=vwnrS1 https://1drv.ms/i/c/654bd515da3faae5/EclPswzlyANLlOb9ZQlshYcBqo32jU0sXC3v902h46ZMAA?e=jcXmJ1

I recently did a night flight from New York to Palm Beach in the Project Airbus A321 NEO (under the Delta Airlines livery) by Chris Evans (illustrated in one of the included screenshots) and upon landing I noticed that the landing lights weren't illuminating the runway at all, even though the switch was on. Upon switching to an exterior view of the aircraft, I discovered that the landing light only illuminates a small area immediately in front of the aircraft. I have posted a copy of the electrical section of the aircraft config file for reference http://C:\Users\user\OneDrive\Desktop\Screenshots\Screenshot 2025-02-06 160040.pnghttp://C:\Users\user\OneDrive\Desktop\Screenshots\Screenshot 2025-02-06 152024.pnghttp://C:\Users\user\OneDrive\Desktop\Screenshots\Screenshot 2025-02-09 124444.png

I had a similar problem with the FSX/P3D Delta Airlines Airbus A321 NEO (by Chris Evans) yesterday, on a night flight from New York to West Palm Beach. The landing lights didn't illuminate the ground more than 10 feet in front of my aircraft

Hey, guys, Hope you can provide me some assistance. Recently, my desktop computer (the one on which I play Flight Simulator X) malfunctioned, and I just got a new computer yesterday. Although I had backed up all my flight simulator addons in advance, using this payware program called Edimensional FSX Backup, I am unable to get the "Restore" feature of my FSX Backup tool to work properly with reinstalling my addons. I have no idea what I am doing wrong. I would like to know if my flight simulator should be installed on my computer for this to work. The other thing that I may be thinking is that maybe the computer doesn't recognize the registry entries from my old device, and if that's the case, maybe I will just have to copy everything manually and redo my backup later. If you guys have any suggestions or helpful advice, let me know. Evan :smile:

Try this tool. You may have to pay for it though: http://www.thefsps.com/fsx/54-fsps-fsx-fiber-accelerator.html