Hessel_Oosten

I saw it too.I copied the link immediately.Have no tecchnical knowledge about it.http://www.techmixer.com/download-directx-10-for-windows-xp/H.

Hi Alain,I mailed it to a wrong adres ... (of one of the messages on your forum; if the guy it sees, he we probably forward it ...).Now a new trial...Hessel

Alain,See your PM.Hessel

Here:http://home.casema.nl/h.j.ftimmermans/Fully working with DC motors and OpenCockpits.Hessel Oosten, The Netherlands

Top Hans, as always !Your site is a learning Walhalla.Thanks for that.Hessel

Go to the downloads of www.flightdeckbuilder.nlHessel

Daimon,Also good info at: http://www.flightdeckbuilder.nl/Register, go to downloads and look for all the 737 info.Hessel

See attached pictures.Home brew "DZUS fasteners".Hessel Oosten

http://www.viperpit.org/forum/viewtopic.ph...6216eee03561555Hessel Oosten

http://www.colinbus.comAbout 1600 Euro's.Hessel

Hans,Absolutely fantastic !!Thanks a lot for all your information.Immediately all here to Conrad .....Hessel

Removing all messages in FS2004 can be accomplished easily by editting the fs9.cfg (in C:Documents and SettingsYOUR NAMEApplication DataMicrosoftFS9) by adding to the [MAIN] (between square brackets) section the sentence: HideInfoText=1 This has the disadvantage that all the screen messages are suppressed. Of course other edits (e.g. removing SLEW, PARKING BRAKES, or leaving only 1 letter of a word etc.) can be easily done, if needed, see below. Download the freeware Hex-Editor :frhed. Homepage: http://www.kibria.de/frhed.html Than the beta (no problem with this beta ! ) version: http://www.rs.e-technik.tu-darmstadt.de/ap.../frhed-v1.1.zip and install. Place the language.dll from your Fs2004 in the frhed directory. You did make a reserve copy already .... Start frhed Choose: File open and than linguage.dll Search (press the "telescope/spy-glass") and search for the sentence you want to remove e.g. SOUND OFF (or what it is, in your language). Important (!!) : In the search window tick UNICODE otherwide you won'nt find the word you searched for. Than OK to search. Now you have found your beloved word. The screen has a left and right part. In the right part is the word you searched for. If you press the letters with the mouse you can see in the left screen, the digits belonging to it. Press now in the left screen on the digits belonging to the first leeter of the word which you are edditing. Replace all the letters you want to remove by 00 ( two zero's per letter) till you reach the end of the word. Save AS (!) and you are all set. If you like it you can also leave the first letter un-eddited to have one (1) reference letter in your screen. Do what you like. Replace the original linguage.dll with this eddited file. Another way to remove the OVERSPEED message: Go to FS2004 aircraft directory and open the blabla aircraft map. Open the aircraft.cfg file and search for the section: [Reference Speeds] There replace: max_indicated_speed = 365.0 //Red line (KIAS) by max_indicated_speed = 900.0 //Red line (KIAS) WAS 365.0, so make it unrealistic high, nonsense This trick does not work for SOUNDOFF, SLEW, PARKING BRAKES etc. Therefore you need hex-edditing or hideinfotext (see before). So, now back to flying, with a cosmetically "clean screen" .... Hessel

Hi ??See attached pictures.Rotary from FlightDeckSolutions.com, Gray type.Also available at OpenCockpits.com, Gray typeHessel

Jeff,What's your mail ?Will send it.Hessel (Netherlands)

John,Look at the home base of FsBuild: http://www.fsbuild.com/and ask the author where the freeware version resides.The is a forum.Hessel

Hi Polmer,Great !It's great fun to make it yourself ! Did the same.Even greater fun is that you don't need to learn SIOC ......It's all programmed for you.....See: www.nicokaan.nlHessel

And I've seen them in reality !Really great + + + !Hessel

Hi Jack,WideView= e.g. 3 pc's networked and all three FS installed.One (center) pc is flying, others slaved and only projecting scenery.WideFs= One pc with Widefs-Server and fs and other pc with only WideFsClient. On this pc is only a fs like environment. Here programs can be run like GPS, moving map but also programs that can "upload" info to Fs pc like Active Sky etc.Undocking = slewing an panel (right click to undock) to another monitor on the same pc. This is what you want.HesselSee also: www.wideview.it

Tuomas,I'm also considering this nice device in stead of the WideView setup now (with 3 monitors), but am a little bit concerned about the relativily *thick* edges (bezels) of my 3 CRT monitors.In WideView I can zoom all the views, which gives the effect that the "world continuous behind the monitor bezels", but as far as I kniow this is not possible with the TripleHead2Go.I have the impression in the pictures on the net that you can see that the runway piano keys, runway lining etc. is not complete straight but that there is a little distortion caused by the monitor bezels. The problem is of course less prominent with the small bezels of a LCD monitor.# Is that true ? Is there a solution ?Now I'm looking to -35, 0 and + 35 degrees.# Is the view in the TH2G the same or is is for some reason (fisheye ?) different from the WideView setup ?Hessel

Hi Robert,Although (for me only?) its impossible to access the forum of Ready for Pushback I've NEVER read anything in theeir fora about this kind of interfacing. The only poosibility is with a hacked keyboard and Key2mouse (www.wideview.it). There is no SDK.Hessel

Hi Jezza,Can't help you with your question but the reason of my reply is that I have nearly the same LDS767/cockpit setup and also have the intention to upgrade to a sort of config you mentioned in the coming months.Now flying with 3 pc's, all driving a WideView monitor and on the server (flying pc) the CDU, Fsconv, MCP, IVAO etc. The server also has 3 PCI cards/monitors (and the CDU on TV out). So the serverload is rather heavy. Think about adding a 4'th pc only as flying pc (panels and cdu). Than 3 pc's can be dedicated to WideView clients only.Did tonight a check with such a configuration and this was a great leap forward for the frames !Probably good to give feedback to each other with this theme.Hessel Oosten, Netherlands(Takeoff **** and here comes the @ internet mail sign **** chello.nl

Hi JB (sorry don't know your name),WideView can not run "network" gauges.So when flying with panel and scenery on pc1 you cannot manage the panel on pc1 with e.g. the mouse on panel of pc2. (in ancient times this was possible with WideView when the instruments/gauges were more standardized and simple and nearly all 'default". Nowadays its easier to undock panel parts on a second videocard/monitor (as you did). Using WideView on pc1 and pc 2 a complete Fs2004 installation is nesessary.What to do ?Make pc1 your flying pc and WideView server.Degrade all the video settings to "as bad as possible" (you don't want to see scenery here). Make the Scenery window as small as possible.Install pc2 as WideView client. Close the instrument panel. Eventually you can disable moest of the gauges with "//". Make the scenery view here as beautifull as you want.Hope this helps.WideView forum: http://www.wideview.it/forum/default.aspHessel Oosten, Netherlands

Alberto,If I understand your problem right, you have 1 pc muth two video cards.Right click desktop, properties, configuation.Enable second video card.In fs rightclick your panle: undock. Bring it to the other monitor.Ready.Hessel

Richard,I think this are important threads for you.They contain information about more or less continueing.http://744.hoppie.nl/forum.cgi/frames/read/10805#10805http://744.hoppie.nl/forum.cgi/frames/read/10832#10832Hessel Oosten, Netherlands

http://www.vbmc.demon.nl/cargolux/H.