greenland

Hi Sara Thank you Sara. Good explanation that make sence for a dummy as me. Regards Henrik

Really nobody knows?

Hi guys I have been searching an explenation without luck. Can anyone here in short terms tell me what 'idle gate' is and does? Regards Henrik Korning Greenland

Hi Bina Great. I am looking forward to get that scenery. Regards Henrik

Am I the only one with that scenery. Regards Henrik

Hi Guys I just bought and installed Kangerlussuaq X. Unfortunately I don't see any runway stribing - centreline and all other markings are lacking. Am I alone here? Regards Henrik

Hi guys I just downloaded Kangerlussuaqn X via SimMarked, but when I run the *.exe file, I am asked for a *Serial key*. Do any of you gurus know where I can locate that 'Serial key*, because I don't see it in any of the e-mails I recieved from SimMarked! Regards Henrik Nuuk Greenland

Hi Guys I just bought Kangerlussuaq x from simmarked, but I am getting totally overwhelmed by the amount af technical information they need. I can't find out how to dowload my purchase - HHEELLPP. Regards Henrik

Hi Guys Simmerhead: Hi Guys I accidently posted the above meaningless answer :wub: Simmerhead: I can get into Flightsim Greenland, But when I try to download I am requested to log in, which isn't possible. BINA: If you can upload that file without breaking any rules, it would be great. Please keep me informed! Thanks in advance Regards Henrik

Hi All Sadly Flightsim Greenland has closed. You can still buy their Commercial Products via SimMarked. But their freeware Scenery seams impossible to find. Does any of you guys have the Freeware Scenery Narsarsuaq X, or know where to get it. Regards Henrik Korning

Hi Thanx for the info. I already saw that, butI I am disappointed about the lack of these radios! Regards Henrik

Hi I just bought this aircraft a few days ago. I am looking for navigation radios, but don't find any. Am I right that this plane isn't equipped with these?? Regards Henrik

Hi Gurus What happens if you try to install SP2 if its already installed. Case is I bought the B200 one Month ago, and it could be installed already. Is there a way to see if its already installed or...??? Regards Henrik Korning Nuuk Greenland

Have you checked for equal amount of fuel in L/R fueltanks, it can cause unbalance. Regards Henrik Korning Nuuk Greenland

HI You seem to have tried a lot of things. Long time ago I had some serious stutters. I tried to set RENDER_TO_TEXTURE to off, and the problem dissapeared - I don't know why. So why don't give it a try! Regards Henrik

Sorry but I have to ask. Have you checked your display settings. To me it looks like VGA color settings.

HiHave you tried the usual:Removing yout fs9.cfg file to a safe place, and let flight simulator create a new one by itself, and see what hapens?RegardsHenrik

Hi NRCAPESThe problem sounds to me as if it has something to do with the radio settings in the "aircraft.cfg" file for the C172.Try searching for the [Radios] - Square Brackets. It will looks something like this:[Radios]// Radio Type = availiable, standby frequency, has glide slopeAudio.1 = 1Com.1 = 1, 1Com.2 = 1, 1Nav.1 = 1, 1, 1Nav.2 = 1, 1, 0Adf.1 = 1Transponder.1 = 1Marker.1 = 1Try to play with the Standby frequency Numbers in the Nav1 and Nav 2 sections (the second Number). As shown in my example here a "1" means that the radios has stanby Frequencyes, and a "0" means it has not. Try changing the second number from 1 to 0 or from 0 to 1, and the problem will normally disappear. Try this for N1 and N2 one at a time, save the file and reload FS9.Hope this helps

Hi JimMine CH-pedals need a simple calibration everytime I restart my PC.When my PC is started, I move the pedals to the full left and full right positions once or twice and Voila - they are calibrated again.I don't se that as a big problem.RegardsHenrik

Hi GurusI downloaded a panel file yesterday (dash8q4.zip and d8q4up12.zip) from Flightsim.com (not availlable at avsim) to use with Dreamwings Dash8 Q-400.Everything is fine exept one thing thing. I can't get Nav 2 pointer to show up in the Nav display.Anyone else have this problem, or is it just me (again :( ).RegardsHenrik KorningGreenland

Hi BobI forgot to mention I use FS9 and Win XP.I thought it was nessesary to uninstall CH CM to use the FSUIPC calibrating system. I recall to have been reading that somewhere, although I don't remember where.My FSUIPC joystick settings are configurated without CH CM installed, and my joystick behaves strange and otherwise when that Program is Present on my PC. I will look into that later, as things seems to work right now, and therefore don't want to touch anything to screw things up again.I possibly have a Mechanical Problem with my Pedals, as even if I Calibrate them through CH CM they won't center correct. They are a little off center to the right all the time. I have managed to compensate for this off center tendency throuh FSUIPC.I read in another thread that I could possibly have a damage in the Potentiometer.RegardsHenrik

Hi again vgbaronUnfortunately it didn't work the way you described. I got the problem solved the hard way - installing CH Control Manager - calibrate joysticks - uninstall CH CM again.Another question. Does anyone here in this forum know what file(s) are containing these joystick calibration settings?RegardsHenrik

Hi vgbaronIs it really as simple as that :( I am at work right now. I will try it as soon as I go home in AHEM - 1 hour and 17 minutes.ThanksHnerik

Hi AllI have a problem calibrating my CH Rudder Pedals in Win XP.I want to use FSUIPC to Control my joysticks in FS9, which means joystick inside FS has to be disabled.Earlier I used CH Control Manager to do the job, but this Program need to be uninstalled from my PC to be able to use FSUIPC.My exact Problem is that Windows Calibrating System tells me to hit a Controllers Button when moving Rudder full left, full right and Differential Brakes Full right and left. Problem is there are no buttons on the Pedals to hit !! :( :( Anyone have a smart solution?

Hi GurusI recently have been changing my Graphic Card, from ATI Radeon x800xt-256Mb - to a ATI Radeon hd4650-1Gig - on my old P4-3.4 Gh Dell dimension 8400 PC.After installing the card and ATI driver, I see a yellow "?" in the device manager called "PCI device".It needs a driver. Where and/or how do I see what type of driver I need. When I hit Reinstall driver it the PC suggest to go to the internet to find the driver.The problem is that my FS-computer hasn't an internet connection. What do I do to see what driver I need? :( RegardsHernik KorningNuukGreenland