SierraDelta

58 minutes ago, sauviat said:

It's a long time since I tried PSXT+MSFS. On the bottom of their screen it says "Waiting for data provider to connect to PSXT_MSFS..." I have FSLTL running, but what is it waiting for?

Thanks

Martin

Sounds like it’s waiting for RealTraffic?

7 minutes ago, Ray Proudfoot said:

You asked the same question on the LM P3D forum. I don't know. I just tried the value recommended. I think it was by Rob Ainscough but he's stopped posting here.

It was indeed Rob A. that posted this and a few other things when P3D v5 came out.

6 hours ago, ahmede19 said:

no, its not a set of simulated flight surfaces moving through simulated airflow. the airbus 320s (FBW, Fenix, Asobo, latin vfr, headwinds, and INI) might move the 3d model's control surfaces, but this is just cosmetic.

So, you’ve studied the coding of these add-ons in detail and are ready to provide proof of your statements?

Please do, we are all waiting …

36 minutes ago, guenseli said:

Fenix FBW is also not as good as the FBW A320 btw

Why? Please elaborate.

6 hours ago, bobcat999 said:

Shaders are about half way down the page, but the whole guide is well worth a read.

https://tweakguides.pcgamingwiki.com/NVFORCE_7.html

I’ve been a great fan of Tweakguides for many years. Unfortunately, Kourush Ghazi stopped producing them some time ago, so please observe that the linked guide was written in 2019 - a lot has changed since then.

6 hours ago, Alpine Scenery said:

I'm amazed they don't do ATC, it's not a complex programming problem.

Here’s a pro tip: If you don’t know what you’re talking about - don’t post on the internet.
ATC is extremely complex.

9 hours ago, KL Oo said:

There's nothing wrong with my system...its a simple case of adding AI Traffic puts pressure on the main thread. The FPS drop is different for each user however. In my case, if I'm running my triple monitor 4K Setup....I can get an easy 35 FPS at EGLL....add in 50 AI traffic and its drops down to low 20s.

You telling me you don't see any performance hit when you add 200 models to your sim?

No, there is obviously some hit, but not what I would characterize as a heavy hit - maybe 10 frames out of 75-80.

One thing - on my system Win11 and the 13900k does a fine job of assuring that all 8 P-cores are working at the same level, same goes for the E-cores, there's no such thing as a main thread.

45 minutes ago, F737MAX said:

May not have to wait too long for a better alternative:
https://fselite.net/content/parallel-42-shows-small-preview-for-immersion-effects-on-msfs/

Thanks for posting this, I was trying to remember where I had seen that //42 (FsReborn/Raul) was working on this. Looking forward to it.

7 hours ago, KL Oo said:

and that would induce the heavy FPS hit we get with PSX Traffic

Something’s wrong, with your system you shouldn’t see any heavy fps hit. Are all your AIG and/or FSLTL models totally up-to-date?

Just checked - and yes, once again, it has indeed been a very slow news day over in the Xanadu forum.

8 hours ago, AeroMaster12 said:

I think that's remnants from an old install that wasn't cleaned up during an upgrade.

I have a similar feeling …

Here’s what my airports structure looks like:

airports
-archive
—simaddon
—stock
—thirdparty
-archive_psxt
—thirdparty
-learned
—simaddon
—stock
—thirdparty
-my_simaddon
-my_thirdparty
-snapshots

Obviously, both thirdparty dirs contain lots of subdirs.

@kiek should I simply uninstall everything and re-install 4.0.0?

9 hours ago, Ant1975uk said:

You are fortunate.

Possibly - or could it be that he, like many, many more of us, simply knows how to run his machinery? One doesn’t need to “work in a global IT company” or “test software for a living” to know one’s way around a PC …

8 hours ago, Pilot 1423 said:

I have the same issue I did rebuild my pc and now it’s telling license revoked can someone help me out here thank you 

As already stated a few posts above:

1 hour ago, Christopher Low said:

Yes, but that's the point. The vast majority of flight simmers are not able to use Frame Generation because they do not have a graphics card capable of the task.

Or - in your case - using a simulator (P3D 4.5) that doesn’t even support FG …

Sounds like you didn’t chose the right version of your MSFS installation, MS Store, Steam or Custom location of community folder.

Check that there are som Rex folders in your Community folder.

1 hour ago, Bert Pieke said:

What happens using dx11?

I honestly don’t know Bert, haven’t used DX11 since Frame Generation became a thing.

For the record, I saw 20.4Gb at FT EHAM a couple of days ago, 4k, PSXT/RealTraffic.

In case anyone missed it on the REX Discord.
I followed instructions to the letter, no problems.
-----------------------------------------------------------------------

PRODUCT INFORMATION:
REX AccuSeason Advanced Edition - Technical Update 1.0 Released

DATE ISSUED:
Friday, October 20, 2023

PRODUCT:
REX AccuSeason Advanced Edition

BUILD:
7.0.2023.1012

BUILD STATUS:
Released

WARNING:
This is a full version of REX AccuSeason Advanced Edition. Therefore, uninstall all previous versions of REX AccuSeason Advanced Edition before installing the latest update.

FIX LIST:
FIXED – Terrain content that caused a CTD with the latest build of the flight simulator
FIXED – Rare situation where Community folder content may be erased.
FIXED – Disposed timer when the application is manually started in automation mode.
FIXED – Store causing product page to failure to load.
FIXED – Registration validation issue.
ADDED – Warning screens when automation is enabled and disabled.
ADDED – Function to automatically disable automation when application is in automation mode.
ADDED – Detailed installation logging system.
ADDED – More relative error messages based upon specific conditions during the registration process.
ADDED – profile.json file validation.
IMPROVED – User registration process.

ADDITIONAL INFORMATION:
If you have previously registered AccuSeason Advanced Edition, you should not need to register the product. If you have issues, please do the following:

Locate the profile.json file located in your Documents/REX 7/REX AccuSeason Advanced Edition folder.
Delete the profile.json file
Re-register the program using your REX AXIS login or with your serial key and order number.
 

48 minutes ago, Vitold69 said:

So it's not this Friday definitely

 

What do you mean? The NDA was lifted as announced - which is what this thread is about.

Version 1.2 available, changelog:

V1.2 (19 Oct 2023)
-updated AI parking codes
-taxiway layout update based on latest changes
-fixed jagged shorelines
-minor 3D and texture fixes
-optmised taxiing over elevated taxiways
-added more grasspads
-added custom animated apron traffic
-optimised highway lighting

Just got an e-mail from Balthasar, he's on the case.

10 hours ago, Vitold69 said:

I really hope sharklets will be free. 

As for 319 and 321. Any guess will it be one package or two? Probably two. They can get more money in this case.

Is it 321CEO with both engine variants and sharklets?

Why not simply do some reading at the source?

https://fenixsim.com/blog/entries/2023-08-05_v2_rollout/

There's another way of doing this.

Pull the speed knob to activate SELECTED mode, but don't turn it yet.
On the MCDU PERF page ACTIVATE APPR MODE.
Dial the speed knob back to your desired mode, the a/c will not pull up to reduce speed, but will maintain v/s to stay on the profile, so you may need to use the speedbrakes.

v. 1.1.0 is also available via ORBX now.

2 hours ago, F737MAX said:

Also, you could be right that it's a sim limitation with the canals/ditches. Perhaps removing the elevation component and keeping them at the same level as the airport terrain is the only solution.

Pretty sure that is part of it, don't forget that Schipol is already below MSL.