larshgf

Thanks. I will take a look at the sticks.

Hi, (1) I dont have Space for yoke and pedals. I fly GA aircrafts with my laptop. I am looking for recommandations for a flightstick. ?? (2) I have just bought a Mad Catz F.L.Y. 5 Flightstick, but my Cessna has a tendency turning to the left all the time. So I am not satisfied with this stick so far. I have tried to calibrate the stick with out luck. Any ideas for solution? BR Lars

Sorry - I meant P3D ver 2.2 -> ver 2.4 (NOT 1.2 -> 1.4)

Does "legacy installeres" mean updates?

I have P3D v 1.2 and would like to update to v1.4. Do I have to install v 1.4 or is it possible to update 1.2 to 1,4? Any info (comparetable) about the difference between the two versions 1.2 and 1.4?

Hi, Looking for a photorealistic scenry for Turkey for my FSX. Anybody WHO knows if it is possible to download such a scenery?? Best Regards Lars - DK

Thank's a lot TheGrunt. I think this works fine. :rolleyes:

Hi, Just installed academic version of P3D. Trying to start it I get this errormessage imidiately: Prepar3D cannot run because the version of Microsoft DirectX installed on your computer is incompatible. Please download the current version of DirectX9.0c from http://www.microsoft.com/directx I have Windows 7 probably with DirectX11. Is this a problem? I had P3D installed without problems before I upgraded my PC. Best Regards Lars

Anybody who knows a fligth analysis utility that works with P3D?

I have the A2A J3 and enjoy flying it very much. I like Cessna 185 too. Sound is fantastic! Than you all for the recommandations.

Hi, I'm considering a certificate for ultralights. Much cheaper :-) Wonder if somebody out there knows of ultralight aircrafts for the FSX (pay- or freeware).? Best Regards Lars

If anybody know of a mission in FSX with tekst-labels like the ones on the attached jpg-file I would be gratefull to receive such a mssion XML file. Either by e-mail or as a link.Thank you in advance. :Waiting:BRLars - DK

Hi,I'm looking for missions with points of interest shown by text-labels.I would like to be able to create missions with lots of POI's (points of interest).Also, If somebody can give me a hint concerning how this is acomplished in the XML file ?Best RegardsLars - DK

The program FSDiscover from Flight1 provides FSX with small textlabels over different POI (Points Of Interest). These points (= locations) is created via the program and saved in a simple textfile where each line has the name of location, latitude and longitude.I would like to create a program which makes FSX show text-labels from a list of small towns in my danish scenery.I guess I have to explore the FSX SDK and maybee the SimConnect part of it. But I do not know much about this and wonder if somebody could give me a hint about where to look??/Lars :)

Hi RonskiIf I click the "full screen" icon in the window's upper right corner the window will fill out one monitor.If I click the "resizable screen" icon in the window's upper right corner - then I can resize the window. But if I do that over more than one monitor my picture gets distorted - that is far too wide!Do I need windows mode in FSX?Maybee not but with my former monitors I had no problem changing between the two modes (full screen and windows). And if I for instance want to make a change in FSUIPC or ned to op FSinn for VATSIM then I neew to change to windows mode.So I would like to be able to change between the two modes and I think there is some kind of solution for this problem. Just do not know how to manage this?Kind Regards & Happy HolidaysLars

Hi RonskiThank you for your answer, WideViewAspect=True solved my problem in FSX FullScreen Mode.However I still have the problem i Windows mode. I am only able to see one screen, showing 1/3 of the 4320x900 resolution. I have changed the resolution in FSX to 4320x900. Do I have to do something else in order to get the window mode working in FSX??Best RegardsLars Frederiksen

Thank you Ron.My firmware is updated to the newest version for Windows7 - 64I will try your advice with the .cfg file.Happy HolidayLars

Finaly I have managed to find a setup with my TH2GO and 3 AOC e2243Fw 21,5" monitors.I have tried 3840x1024 because my "Matrox PowerDesk" program was recommending this resolution but in this solution with my monitors everything was too wide.The 4320x900 solution gives a fine picture but leves two problems (always problems.......)1) FSX only works in full screen mode with this 4320x900 resolution. How can this problem be fixed?2) When in the cockpit and zooming out to 0.30 the panel and instruments are seen VERY CLOSE. How can this problem be fixed (if possible)?Looking forward to a solution :Thinking: Best RegardsLars

Having tried a lot of things to make my 3 AOC screens function with MAtrox TH2GO without luck I would like to know if somebody can give me the name of a 21" monitor which can show a good solution with 3 screens (5040x1050 or 5720x1080)?

It looks like the combination of 3 AOC e2243Fw 21,5" LED monitors and TH2GO Digital Edition does not work properly together. The only resolution that can result in 3 pictures connected - edge by edge - is 3840x1050, but it looks stretched and too wide - if you understand.Propably the best looking resolution is 5040x1050, but this does nor work on my combination.So my question is:1: can you give me a link to a guide that solves this problem? OR2: can you advice a good combination that delivers a fine coherent picture for my FSX. What Matrox device ? What kind of monitors?/Lars

Ron, I do in fact use Refresh Rate 60 (Input Refresh Rate 59) Hz. And I have checked the device manager, under monitors, and the driver is for sure 'matroxtriplehead2go digital edition.To resume I have tried 3 settings:3840 x 1024If I use this resolution the monitors are filled out with graphics. But the picture seem to be stretched too much in the horizontal direction.5040x1050 & 5720x1080If I use these resolutions the monitors there is only a picture in the right 4/5 of the screen whereas the left 1/5 is black. So in fact Matrox can handle these resolutions but I to somehow get the graphics on each screen stretched so I can get rid of the black rectangular areas on the left 1/5 of each screen./Lars

I have the TH2GO Digital Edition running at 5760x1080 on 3 x ACO e2243Fw 21,5" screens with the latest firmware, Powerdesk utility and video driver.My problem is that the graphics in each monitor do not fill out the frame. And this gives me 3 seperature pictures when I use my FSX.If I use another resolution 3840 x 1024 the monitors are filled out with graphics. But the picture seem to be stretched too much in the horizontal direction. When I use only one of my monitors I get a fine filled out picture in 1920x1080. So my monitors are capable to do 1920x1080 each. Can Matrox TH2GO (Digital) handle this? Why does TH2GO only fill out the right 4/5 of my monitor and leave the left 1/5 black?/Lars NIVIDA GeForce GTX 550Ti/Windows 7 Home Edition (64)

Paul!Having the vey same problem (but with CH Pro PedalsI) I wonder if you ever got a solution to your problem. And if you did I would like to hear about it!Best RgardsLars

That's correct Akila. But I do not have the Enterprice or Ultimate edition of Windows 7.So right now I'm looking towards VATSIM - it's a lot of money to buy BOTH the W7 Ultimate AND VoxATC But thank very much you for your help Akila! - and who knows, maybee Santa Claus has something in the bag for me when he enters my chimney......

Thank's a lot Ray - fine review!