Jump to content

Considero2

Frozen-Inactivity
  • Content Count

    16
  • Donations

    $0.00 
  • Joined

  • Last visited

Everything posted by Considero2

  1. Hi Bryan,Thanks for the support. I have tried several things, but I still had problems with the readback of calls (no sound). In the end I tried another soundcard. A Creative Titanium Fatality1 and all the sound problems were solved. So Asus still has some work on their drivers. But now I can finally enjoy FS2Crew.With kind regards,Arjen
  2. Good day,Recently I bought the FS2Crew Heavy Hitters Pro Pack since I have many aircraft that are supported in the package. Thank you for the reduced price. I am trying to get familiar with the Airbus SE package first. My biggest problem is that many times during the use of FS2Crew the package stops playing the sound of the calls. Most of the time things go wrong when it is time for the push back and engine start. The sound of the ground personal is most of the times not there. I never had calls from the FO when I checked the flight controls. Even running through the checklist will give no sounds after the push back. When I run through them nevertheless the switches are set by the FO. Before every flight I go to the Center to type down the departure and arrival airport and runways. I always push the button for the Restore SoundGauge.dll. So I am sure the correct dll is loaded. I use a Asus Xonar soundcard. Is that the reason for my problems? What soundcard do you use to test the product?Another point is the sheets that are presented during the preparation of the aircraft. For me the typed dotted characters on the load sheet are impossible to read. My screen is set to 1920 x 1200. The flightplan I get presented is always the same and adds no real value. It is for an A320 while I am flying an A319 for instance. The fuel bill is always from CYVR (if I remember correctly). Wouldn't it be possible to read all sort of data from the FSX flightplan or the Start Center? Some sheets use these data others don't. It would add to the realism if they were more taylored to the actual flight you are making. Or am I doing something wrong?With kind regards,Arjen van GroosNetherlands
  3. This is what you see everytime a good developer is coming close to the point where the product can be released. People start writing down their special wishes for the product. If the developers would take all these wishes seriously a product would never be ready for release. So I hope PMDG will just finish the product so it can be used in normal conditions and save the special stuff for the servicepacks.With kind regards,Arjen van Groos
  4. Hi Jim,I didn't try to reinstall and I am not going to. I think it won't help and I have no problems as long as I don't start FSX with the "Launch FSX" button in ActiveSkyX. I can start ASX first and than start FSX with the FSX icon on my desktop and than things work fine. I can also start FSX first, than ASX and after that RC4. This works fine too. So I don't have a real problem as long as I keep my fingers away from the "Launch FSX" button.Kind regards,Arjen
  5. >Hi,>>Then where is the IPC message coming from?>>Jim>>http://www.hifisim.com/banners/hifi-community-sigbanner.jpg>http://www.hifisim.com/Hi Jim,That's the question. If I had the answer I would tell you. Maybe other people on this forum who have RC4 can reproduce it. In that case we would a least know if it is caused by something on my system or not.Kind regards,Arjen
  6. >Hi,>>Thanks! This looks like a network install and something is>slowing down the communication between the 2 machines.>>Thanks,>Jim>>http://www.hifisim.com/banners/hifi-community-sigbanner.jpg>http://www.hifisim.com/Hi Jim,I only have one machine on which I run FSX, ASX and RC4.The OS is Windows Vista Home 64.I already tried it with NOD32 not running.The firewall is the default MS firewall.Kind regards,Arjen
  7. Hi,I noticed a problem with the use of ASX and RC4. If I start ASX first and start up FSX with the help of the "Start FSX" button in the ASX menu, I get an error message when I want RC4 to connect to FSX. I get the following message: "IPC timed out all retries". I can push a "retry" button but that will make the same message pop up.If I push the "cancel" button RC4 is terminated.If I start FSX first, next ASX and than RC4 I have no problem at all. I reported this to the RC4 developer but I thought it would be good to let you know too.Kind regards,ArjenThe Netherlands
  8. Thanks. Everything is clear now and it works well.Kind regards,Arjen
  9. Hi there,I read something about FSUIPC and (if I understood well) the fact that you no longer need to install the AdvDisp.dll into the Modules folder of FS9. But to be honest it is not clear to me, how it should be done now. Do I have to check something on some FSUIPC tab page and if so on what should I check and on which tab can this be found?Help would be very much appreciated.Kind regards,Arjen
  10. Thanks a lot Morgan.Now I can get things rolling.All the best,Arjen
  11. Hi Morgan,Thanks for your reply. I am a step closer now. I have DXTBMP installed. Can you confirm that I should use File/Save Extended Bitmap save as "DXT3 with Alpha" for DXT3 bitmaps and File/Save Extended Bitmap save as "Extended 32 bit 888-8" for 32bit bitmaps?Regards,Arjen
  12. Hi there,I am doing my first steps in the world of repainting. I read some tutorials and repainted a PSS A320. The PSS paintkit instruction tells me to save the new image as "32 bit with alpha".But how do I do that? When I want to save I don't see a way to select this 32 bit with alpha option. I see the "Windows or OS/2 bitmap but that will only save in 24bit bitmaps.Help would be very much appreciated.Regards,Arjen
  13. Hi guys,I love ActiveSky and it is always there when I "fly". But I must say I am a little mixed up by the Active Sky Version 6. Is ActiveSky 6 a new version of the Active Sky Enhanced or is it a seperate product line?Greetings from the Netherlands,Arjen
  14. I had the same problem as you had. Got tired eyes reading the numbers and needles. I installed another panel. The guys from Friendly Panels made a panel for the Beech King Air 350 and the Baron 58. I bought this panel and installed the first one in the cockpit of the PMDG. The layout is a little different from a real Beechcraft 1900D but it is not so difficult to see it as a modified one. And what is more important is it very easy to read and to use. With the old panel I almost never flew the PMDG Beech and now it is one of my favorites. :) You can have a look at these panels at:http://www.friendlypanels.arrakis.es/index.htmIt may suite you too.Regards,Arjen van GroosThe Netherlands
×
×
  • Create New...