soldano

I have a strange problem: I select in FSX a plan starting from LFPG, situate the aircraft in the airport, then open RC4, select the plan, and when started, my aircraft is flying far and over the sea.- I can reposition it to the departure point, but then the RC4 clearence option is different than normal: "CLR by FSS", it begin with a phone call, and no ground communication option follows.-I noticed that in the controller info all LFPG departure frequencies are in 0, while the arrival airport has all it frequencies OK.- When I unload FSX, and reload the same plan within RC4 all LFPG frequencies reappear.-I uninstalled and reinstalled RC4 and rebuilt the database and the problem persists.-It doesnt happen with other departure airports, or when LFPG is the arrival airport.-

I have no opinion yet about the flight model, but I agree about the VC issue.- Besides the text problems,the general quality is, by PMDG standards, poor, and I thing is a step back from the 744 which in my opinion is much better done.- I found the buttons text almost unreadable, I tried all resolutions and the buttons begin to be almost readable at 1680 +, even with AA at AF both at 16.-I hope that, as it was recently recognized by PMDG support as a mipmap issue, it should be fixed quickly.-Intel E8400 @ 4 Ghz4 Gb RamGForce 8800 GTX 512XP SP3FSX SP1

>you don't have to spend another dime.>>you do have to send me an email, so i can send you the link,>where you can download it from>>when you install it, you will need 2 keys, probably.>>send the key requests to me, and i will send you the keys>>no money is involved>>jd>>Thanks jd , which is your mail ?

Now I realize you are talking about a complete new 4.3 version, besides the 4.3 exe upgrade which I was using for FSX.-The problem is that in the products site I have to pay for downloading it, which seems not reasonable, having already payed for the 4.2 version and the 4.3 update which was freely released.-Is there other way to download it and get the keys ?Thanks

>the upgrade path from 4.0 to 4.01 to 4.2 was problematic to a>lot of people.>>i suggest you uninstall whatever version of rc you have.>>send me an email, get the link to 4.3, download it, and>install it.>>then get a key>>then rebuild the rc database>>then define the .flt/.wx path>>and let's see where we're at.>>jdI am getting more confused, perhaps I didnt expressed myself clearly, sorry for my bad Engligh.- I had no problems upgrading from 4.0 to 4.01 and then to 4.2 which was working OK for FS9.-In order to make RC work in FSX, I downloaded 4.3, which as far as I know is just a new exe which replaces 4.2, so per instructions, I copied the entire RC4 V4.2 folder and renamed it RC4X, replacing in it the old 4.2 exe for the new 4.3.- So now for FS9 I use RC4, and for FSX I use RC4X.-It works, with the only problem in the FSX version in rebuilding the database, so I tried deleting in the FSX root folder: r5.csv, runways.txt and runways.csv, downloaded MakeRwys.exe V4.29 and then the utility ran OK and rebuilt the databaseThanks

>i'm not sure where you're at, or what is where.>>if you fs9 and fsx, why not uninstall rc 4.3, install 4.3, and>choose the fs9/fsx install option>>then run the rc scenery rebuild after launching the rc for fs9>icon, and after launching the rc for fsx icon>>also make sure makerwys.exe 4.29 or older in both fs9 and fsx>root directories>>jdDont understand what you say about uninstalling and reinstalling 4.3.- In my case it is not an installable upgrade, is just a new exe which replaces 4.2 in order to work with FSX.-

>I am running XP SP3.- I upgraded my PC and reinstalled RC4 in>FS9, I think is enough as the FSX version is a copy of the FS9>folder, and only substitutes the exe for the 4.3.-Well, it happens that I didnt recopy in FSX/Rc4X the new FS9/Rc4 folder after the reinstall.- So I did it, replacing the exe by the 4,3 and now it works OK and load all the flight plans I select.-I also copy in the FSX root folder the new makerunways.exe, but it doesnt seem to work from there.- If I use the "rebuild scenery DB" option button, after entering the FSX path, a first message informs that it is rebuilding r4.csv and running makerunwys.exe, when accepted other inmediate message inform the rebuilding has finished, and a third one informs about rebuilding a new a4s.scv file, the last one informs it was rebuilt.- It seems nothing is done between the messages, so I doubt it really works.- I tried the same in the FS9 version and the process of updating takes some time and a box opens describing the advance of the process.-Thanks

I am running XP SP3.- I upgraded my PC and reinstalled RC4 in FS9, I think is enough as the FSX version is a copy of the FS9 folder, and only substitutes the exe for the 4.3.-

I am using RC4 for both FS9 and FSX, in FS9 works OK, also it worked in FSX, but now when I open it and select a flight plan, an error message appears, it says "Run-time error 75 radarcontact.rcvmodule_write_callsigns".-Also Makerunways.exe which is in the FSX folder, doesnt open, and when trying the rebuild scenery db option, after entering the FSX path, other error message appears with "runttime error 75 Path/file access error" text.- What should I do ?

Thanks, that was what I needed.-Strange Microsoft released the Lear with that deficit.-

I cannot manage in Learjet to make Nav2 data show beside the HSI (Id, Freq, DME dist. etc)as Nav 1 does.- It was posible in FS9 using the key below, which switched between both Nav data.- There is a pair of knobs over the panel, the right one with Nav 2 selection but I only makes the needle visible.-

>Hi Jorge,>similar to me. Due to a HDD crash I'lost my 737NG and 737>800/900. So I purchased the extended download service for both>and got immediately an order confirmation. I've sent the>required informations three times to PMDG with no reaction.>Mysterious: the order confirmation was ok for email program>but a mail with the informations about extended download>service will not be accepted by the same program and the same>sender????>>wolfgangYesterday I received a mail from support about revalidating my key.- Now is all OK

On 05/17/08 I sent a request of a new key due to having reach the maximun number or reinstalls of the B747.-I had no reply, please answer me.-Jorge Soldanosoldano@sinectis.com.ar

>ctrl-shift-/ is the key>>jdThanks, I should have imagined that.-

I confirm that, in VC I had a slight increase from 9 to 10 fpm, and in 2D a similar one, both sliders set at 25 .-AMD FX60GF8800GTS2Gb Ram

Sometimes appears in the ATC messages: "CS/unable to comply", without a keystroke to make that message be sent, how can I use it ?

>In your example below the number 343 associates MENDOZA FIR>with Winwood folder 343. From the RC home folder open the>Winwood folder. In that folder open folder 343. If>$argentina.txt is in there change it to $spain.txt. >>>For example, this is one center belonging to Argentina:>>"343,MENDOZA>>FIR/(UIR),I,-28.5,-30.88,-33.11,-33.8,-35.9,-38.5,-37.68,-36.89,-36.44,-36.01,-35.23,-34.06,-33.52,-33.25,-31.96,-31.51,-31.16,-30.15,-29.33,999">>What should I do in this case ?>>Thanks >>>Thanks Ron, it works, but what can I do in those Winwood folders that doesnt have the $argentina.txt ?, for example 356, Ezeiza, which is the principal center in Argentina.-I noticed that in the Winwood folder there are some subfolders with country names and in some of them, several wav files.- In the case of Argentina, there are no wav files present, what should happen if I copy to it all the wav files of the Spain folder ?Thanks again

>In each of the folders above that you listed where you want>Spanish change the country file name to XX$name.txh (just a a>place holder in case you want to put it back) and add to it>$spain.txt as an empty .txt file. As an example in 343 change>$argentina.txt file name to XX$argentina.txh and create the>empty text file named $spain.txt with Notepad and save it.>>There are no wavs in the Argentina winwood folder but there>are in Spain.>>See how that works for you.I dont understand your explanation: In the z4.csv file the references to centers are not *.txt files,and there are no country names, the structure of the file is a list of center names situated in diferent countries preceded each by a number and some parameters following.-For example, this is one center belonging to Argentina: "343,MENDOZA FIR/(UIR),I,-28.5,-30.88,-33.11,-33.8,-35.9,-38.5,-37.68,-36.89,-36.44,-36.01,-35.23,-34.06,-33.52,-33.25,-31.96,-31.51,-31.16,-30.15,-29.33,999"What should I do in this case ?Thanks

Well, I did what you suggested: returned to 3.80, checked debug, and made a flight from Charles de Gaulle to Heathrow, and now had no problems.- Really confusing.-

>can you go back to 3.8, make a log for me, and reproduce the>error. i'll be able to tell you the problem. i doubt it is>fsuipc.>>do you have fsuipc doing autosave-ing?>>jdI will try again with 3.8.- I cannot find an autosave function in fsuipc.-

>look in the z4.csv file, with NOTEPAD, NOT excel>>tell me what centers comprise argentina>>jdThese are Argentina centers: 343, 345, 350, 355, 356.-These are other Latin America centers in which spanish chatter will be welcome: 306, 328, 330, 334, 336, 338, 339, 341, 344, 354, 358, 359.-Thanks

I deleted FSUIPC V3.8 and returned to V3.74 and now is all OK.-Thanks

When a fly in Spain I hear spanish radio chatter.- As I live in Argentina, how can I manage to hear in my region that same chatter as in Spain ?.-Thanks

I am running XP and have not installed kapersky.-Thanks

While using FS9, after clearence, taxiing and takeoff process, and when climbing, RC4 freezes.- En error warning box appears referring to something as: "error 76 in execution time - Radar Contact FSUIPC.Rcv4 Code"It never happened to me before and I had just upgraded to FSUIPC registered version 3.8.-Can you help me ?Thanks