Caseyb17

Picked up Accu-Feel and the CJ1+ v2.0 from Eaglesoft today!

I have had this problem for years with RC and for me, it happens at every airport. The only way I have found to get around this is to not switch to the tower frequency when RC tells you to but rather wait until the plane in front of you has started their takeoff roll. Once that last plane takes off, you can hit the key to switch to the tower and ATC will direct you onto the runway. Casey

Thanks Dan. I checked the wpNavAPT.txt file and TUPW is not in there. Is there a way to manually enter it so that the FMS will recognize the airport? Thanks for your help.Casey Booth

I just picked up the J41 last week and have been going through the manual and tutorial with great success. I have run into a problem when setting up from the airport at TUPW. The FMS does not show me located at TUPW but rather at the nearby airport, TUPJ. When I try to enter in TUPW it will not save and the enter button does nothing. It's like it doesn't recognize the airport. Note that I have modified TUPW with ADE from its original configuration, larger rwy and more parking but no position changes. I also updated the NAVDATA to 1007 if that makes a difference. I'm not sure how to correct this. I have relocated to other airports and tested the alignment and everything is fine. Any help would be appreciated.Casey Booth

With my machine, I found that I have to turn off the power to my machine completely to get the TH2GO to reset and boot. Just shutting my machine off won't do it. Try this. Shut your machine down, hit the power switch on the back of your machine at the power supply. You should see the light on the TH2GO go off. You can achieve the same by unplugging the power cord and plugging it back in if you don't have a switch. Wait a few secs and turn the switch back on. Then power up your machine. You should see a green light on the TH2GO box. You should then see all 3 monitors light up. I have to do this everytime I shut down. Also, you have the USB cable from the TH2GO box plugged into a working USB port right? The software doesn't seem to work unless your machine can see the box.Hope that helps. Casey

Also, make sure you have installed the latest version of the Powerdesk-SE software from the Matrox website. Set it to run at bootup. It will also automatically set the Wide View Aspect in your FSX.CFG file to True the first time you run it.I have a very similar system as you with a C2D 6700 OC'd to 3.6GHZ and an 8800GTS 640mb on Vista Ultimate with my TH2GO on 3 19" monitors that have a native resolution of 1280x1024 and I have no noticeable reduction in performance. Casey

Hey Mike,I have been having the same problem with API.DLL crashes. I saw your post in the Simconnect forum where you said you had fixed it. Can you tell me how you fixed it?Thanks,CaseyBFSX, SP1 & Accel/SP2Vista 32EVGA 680iSLIIntel E6700 OC's to 3.6GHZEVGA 8800GTS 640mb4GB Corsair Dominator

It's not your mouse, it's Vista. I had the same issues. You need to turn off Windows Aero. Control Panel>Personalization>Windows Color and Appearance. Use any other color scheme except Aero. That's what worked for me.Casey B.

Bryan, that did it. I ran the registry fix again, rebooted and did a full reinstall from the beginning and all is well now. Thanks for the help.Casey

Hey folks,Just did a re-install of FS2Crew PMDG 747 on a new VISTA machine and when I run FS9 there's no PM or click spots in the 2D or VC cockpit. I installed update 1.2 but noticed that the config file didn't change. (i.e. didn't have to click on the button in the start center). I read in an earlier post that there were some entries missing in the config file and that it would be fixed in the 1.1 update. I've tried both updates now and still no click spots. My config file still shows a date of 9/7/2006.I ran the update as an admin and even tried to run flight 1's registry fixer but no go. Anyone have any ideas on how to get this fixed?Thanks for the help.Casey BoothVista 32-BitIntel Duo Core E6700680iSLI MB2GB Ram8800 GTS 640MB150GB WD Raptor HD