FredrikHj

Hi The faulty functions (Autopilot) until now are: CRS1 button not rotating when turning it but the value in the display is changing ? ALT SEL rotary not turning, value in the cockpit is changing MCP not sync! I have not look at the guide yet but I cannot find any setting for SPD? In left switch panel: 4. Fuel L and R finner jag inte 5. Fuel transfer finns inte Inte så mycket faktisk men en del saknas! Mer kommer nog

Hi Nearly all of the function in the LINDA module (F1 Cessna Mustang) are link for the LIB: Default FSX not in the Cessna Mustang module?! The all function in the cessna mustang are not able to assign in LINDA. i would prefer to assign these throug fsuipc if you cannot help me? Can this be able through FSUIPC script? I have tried to make a mouse macro bu it did not work! :( Great aircraft so I need to sucess in a month, I must know what to do, if not I will demand a refund! Add: I maybe can assign some functions through fsuipc by default fsx funtions ?

Hi I have bought it to test the aircraft I am trying to correct the assigment in LINDA for the MCP that was set incorrect. Am I able to interact in another way besides LINDA? Best Fredrik

Hi Do you have aircraft? If it worth buying? Fredrik

Hi I am able to get a refund from Flight 1 in a month so I can test it Best Fredrik

Hi If I am not blind the aircraft: http://www.flight1.com/products.asp?product=f1mustang Is the aircraft who is supported by LINDA? See the picture! Can you confirm it, please// Best Fredrik

Hi I am trying to link my potentiometer to the knob Circiut Breaker Bright in the overhead of the 737ngx cockpit. I do it through event control and it is working fine with buttons but the axis is not in sync! I mean the full range of the knob in the cockpit is perform when I have just turn the potentioimeter maybe 10 degrees? Best Fredrik

Hi I have solved it, thanks! Best Fredrik

Hi I am trying to link the Hyd Pumps too my components. It is a simple on/off buttons. I type event control: 69797 in parameter box the value 0. The button is unpressed when off so I type the same 69797 but the button will not be flip to off. I have tried 1 = off! it is all done in FSUIPC// Best Fredrik

Hi I have solved it with event controls and its parameter 0...... start with 0 for the left to right fuctions so my parameters are 0, 1, 2 for the correct event nr! Best Fredrik

Hi I have some rotary switches which I like to connect togetherwith some function in the cockpit. The functions I like to link are: Auto Brake SPD REF N1 Set XPDR Main panels DuS Lower DU and some more Each of the rotary switches have about five diff... function but if you ex. are trying to create a mouse macro for those functions, not all but a few have same functions ID!? Best Fredrik

Hi I have found that you need the binary number in the parameter box, i will check if nr 1 or 0 will but it did not work for me but i will check it Sorry for steal the thread but I want to have a comment from somebody who is in the same situation as me! Have done a project with a lot of switches and need something to inputs to pmdg 737ngx and find this card: FDS-SYS2X High Capacity (128Input Card)! My question is: does it work without problem or is IOcard better suitted for the aircraft? Best Fredrik

Hi I am trying to sett a offset to a physical button at the Saitek throttlequadrant. The offset is: 6444 size is one Byte name is: FCTL_YawDamper_Sw and control value is Bool (true or false)! I have enable the data broadcast in the file: 737NGX_Options.ini This won´t work. Bellow is my steps: 1.) Start FSUIPC --> Button + Switches 2.) Press the button I like to link to the offset 3.) After some research in the drop down list I choose "Offset Set Byte" 4.) In offset I type 6444 and in Paramet I type " ?" I have tryied with a another offset, not i Bool, there I have type ex. 0 for off and so on but it has not work iether! Question: A.) Offset is changing to a hex when I close FSUIPC and open it againg, far as I know that is correct? B.) The control Offset Byte Set is also correct since this is Byte I will type? C.) The problem is how I am typing i Parameter? D.) Offsett box is just the offset of the button I will control. The Parameter box must be link to the corresponding function of the button??? Glad if you can give med a tips or a trace to the correct solution. I have read a lot! I have the last FSUIPC version there offset for pmdg 737ngx is included// Best Fredrik

Hi I am trying to sett a offset to a physical button at the Saitek throttlequadrant. The offset is: 6444 size is one Byte name is: FCTL_YawDamper_Sw and control value is Bool (true or false)! I have enable the data broadcast in the file: 737NGX_Options.ini This won´t work. Bellow is my steps: 1.) Start FSUIPC --> Button + Switches 2.) Press the button I like to link to the offset 3.) After some research in the drop down list I choose "Offset Set Byte" 4.) In offset I type 6444 and in Paramet I type " ?" I have tryied with a another offset, not i Bool, there I have type ex. 0 for off and so on but it has not work iether! Question: A.) Offset is changing to a hex when I close FSUIPC and open it againg, far as I know that is correct? B.) The control Offset Byte Set is also correct since this is Byte I will type? C.) The problem is how I am typing i Parameter? D.) Offsett box is just the offset of the button I will control. The Parameter box must be link to the corresponding function of the button??? Glad if you can give med a tips or a trace to the correct solution. I have read a lot! I have the last FSUIPC version there offset for pmdg 737ngx is included// Best Fredrik

Hi Can I be able to use bellow program for pmdg 737ngx to control switches etc. etc. in the cockpit with a physical components:? http://www.jimspage.co.nz/arduino_keys_beta.htm Best Fredrik

Hi I need help with thise. I have two Arduino Mega2560 R3 card with several component. My goal is too interface these components with the aircraft! The cards is ready too interract with FS but I am going to need a application to handle the commands from the components to FS. The program I have look at is: http://stavroskcy.blogspot.se/2011/12/connecting-arduino-to-flight-simulator.html This shall be working with FSUIPC but pmdg737ngx can only have the commuinication with simconnect, you can read it in the SDK of the aircraft Some question: 1.) Can you confirm or explain that FSUIPC is for addon to pmdg737ngx and simconnect is for hardware? 2.) Am I able to to this with the program that I have found? 3.) Better if you should not have to be dependence of a external program?! Best Fredrik

Hi Some news to use the Arduino cards by LINDA? Can I write a lua for it? Best Fredrik

Hi All I have follow: http://stavroskcy.blogspot.se/2011/12/connecting-arduino-to-flight-simulator.html For the interfacing fsx --> Arduino and the difficulties was that I have two cards :( After I while I have success to rread my two cards The hard work is now to link the diff... values with the correct fsuipc offsett, is quite fun to program Best Fredrik

Hi guenseli I am very happy with LINDA, It was about 1 year since I last flow but during the time I am making a cockpit panel with alot of buttons, switches Rotary Encorders & potentiometer! I like to use LINDA for the communication for Arduino Mega2560 R3 (Two cards) direct to FSX and mine PMDG737NGX. I gues I need make the cards to be acting like HID joystick but how? I will post the result if I am quicker than you Best Fredrik

Hi Thanks for the quick respond :) Se: http://www.mycockpit.org/forums/arduino-cards-link2fs/24971-newby-link2fs.html#post133628 for further infomation! I need to make somthing to make the Arduino cards can work with the fsuipc. It´s better for my setup to have the Arduino at my second PC with FSUIPC since the Link2FS can only works at the same computer as FSX! Best Fredrik

Hi I mean if I can controll ALL the buttons and the switches like the ones in the overhead pedestal, light, an in the mip etc. etc.!? Best Fredrik

Hi Can anyone confirm that the Aircraft PMDG737ngx can be controlled by keypress as key G for Landing Gear? Best Fredrik

Hi Se: http://www.mycockpit.org/forums/arduino-cards-link2fs/24971-newby-link2fs.html#post133628 Can the program work together with pmdg737ngx? Best Fredrik

Hi I have two Arduino cards and shall install severral switches, potetiometer and rotary encorders, I like to control some overhead, MIP buttons and cockpit light etc. etc. All these functions are from the PMDG 737ngx and the aircraft is good to go with FSUIPC. So I need something which need can be the link between the Arduino and FSUIPC? I am some weeks from that point now but I must be ready when it is time for the setup and stuff! I have LINDA if the great program can be the link? Best Fredrik

Hi I would be really glad if someone could tell how god Simtouch for FSX IS? If that is possible to control thise bellow it should be great: Overhead: FWD light panel Wipers Auto / Land ALT panel Air temp Fuel Anti-ICE Eng/Elec pump Windows/pitot heat Fan panel Stuff in the MIP like landing gear.... Best Fredrik