julietfox

Hello Bryan Thanks for your mail ! Jean-François

Hello Bryan I had the magnificent " LEVELD 767 " installed on FS9 with FS2Crew. I abandon gradually FS9 for the benefit of FSX. I took advantage of the reduction granted(tuned) by Flight 1 to buy " 767 LevelD " FSX version. But I am disappointed because I notice that it is necessary to buy again " FS2Crew " version button for FSX because that for FS9 does not work with. Customer for several years (F1 ATR, IFLY 737, A320 Wilco, A320 Aerosoft), I became hooked!! Is a reduction possible for the " FS2crew LevelD 767 "? Thank you in advance Jean-François MOREAU

Hello Bryan I have the same problem only on model 800 and also only on this model, when I put (for ex) 6.0 on Stab Trim, in Chekck list "Before Take Off", the captain say always : 9.0 unit ! Thanks for the future service update Jean-François

Hi Bryan After 5 flights with differents trim set, I confirm : The captain say always : "9.0" . ?? Cheers Jean-François Moreau

Hi Bryan Thanks Sorry Physical of course ! Jean-François Moreau

Hi Bryan The pysical trim is 6.5 (exemple) positioned by me and read on the pedestal Before the update Ifly, the value say by the FO was approximatly the same of pysical trim position. Really, where can I read the trim setting ? in aircraft.cfg ? Cheers Jean-François MOREAU

Hello When i call "Before start Procedure", me, the PF set trim for take off : for example : 6.5 Then when i call "Before Take off checklist, the first officer FO say : " Stabilizer Trim" and the captain say : 9 point 1 unit ?? But the trim is 6.5 Why this difference ? Thanks Jean-François

Hello OK now i have transfered alls applications FS9 on my new computer W7 64 FS2Crew for IFLY, Airbus Wilco are good But for FS2crew for PMDG747 and Fligh ATR72 I have a problem with the main button. When I push the main button on my joystick, alls responses are maked in the same time ! But if I use the touch (F9) of my keyboard there is no problem ! I think that It's not my joystick because with 737 Ifly & Airbus there is no problem with the same touch. I have 2 profil for the joystick (Saitek X52) : - One for IFLYFs2crew & Airbus FS2crew - One for PMDG 747 Fs2crew & ATR72 Fs2crew Thanks Jean-François

Hi BryanThanks !"3. For the Airbus you may need to disable DEP."DEP ?? What is it ?CheersJF

HiI'm going to change my computerActually, I have Windows XP32 & FS9& FS2crew version Button for PMG747 - Wilco A320 evolution - IFLY 737 & 767 LEVELDOn my new computer, I'm going to install Windows 7 64bits & re-install FS9 (& FSX)Can- you give me some advice to uninstall & re-install FS2Crew ?ThanksJean-François

HelloHere, you have a check list (in Forum IFLY)http://ifly.flight1.net/forums/forum_posts.asp?TID=3094&KW=FS2CREW&PID=33498&title=ifly-737ng-flow-checklist#33498I use this checklist to fly with IFLY 737 & FS2Crew button control version.Good flight Jean-FrançoisSorryIt's here :http://library.flight1.net/?s=fs2crewJF

Bonjour FS2Crew is'nt the responsable of this problem Sorry ! :Confused:It's Wilco !If you enter a FP in R1 of FMCU, FS2004 close cause error ?But it's very difficult to contact Wilco... ! The aftersales service is very bad ...!:Frustrated:Ifly is better better better... !CheersJean-François

HelloI have installed Wilco Airbus série 1 Delux & Evolution. There is no problemI have installed FS2crew for Airbus + upgrade 2 + Evolution upgrade for Wilco Airbus.When I want to perform the FP on MCDU (like FMGC --> enter LFML/LFPO -->1R), Fs2004 crash and I have a error's message In C/Document.../Microsoft/FS9, two news files are created ? (dxdiag.xml & fs9.cfg.txt)I have uninstalled & re-installed all files Wilco Airbus & FS2Crew.But there is the same problem ??Thanks for your assistance Sorry for my bad english !Jean-François

HelloI use only plane with FS2Crew ! only button version1 - Ifly737 - 40% :( 2 - PMDG 747 - 30% 3 - ATR72 - 10%4 - LEVEL D 767 - 10%5 - Wilco A320 - 10% (Thanks for the upgrade Evolution :()JF

Hi BryanV1.2 downloaded, installed & tested Very good :Applause:Thanks for this update Jean-François

Hi Bryan1.2 version is ready ?Jean-François

Hi BryanIt's good !I have modified the key for the main button.Now it's "v" and there is not conflict whith the black box But ...I have installed FSRecorder to day and I think that I have the same problem with this .I have uninstalled this program.Thanks for your serviceBestJF

Hi BryanThe Cyberavia's Hotline confirm that "x" on keyboard is used by the black box It's used to indicate to the black box that the flight is finished Is-it possible to setup Main Button with an another touch of keyboard ? Because with PMDG 747 or ATR72-500 F1, there is no problem with black box !BestJF

Hi BryanI think that my problem come when I open the blackbox of my virtual company (CYBERAVIA)This morning, I have make a flight and there is no problem for the preflight checkt list.But when, I have opened the blackbox CYBERAVIA to download my flight, and then when I press the main button, the text on left display not change !I have begened again my flight but whithout the blackbox CYBERAVIA.:( it'ok from LFML to LFPG whith all evenements and checklists :Applause:Now I d'ont know what I make ? :Thinking:Because I can fly whith iFly 737 & FS2crew but whithout my virtual company :mellow:I think that I'm writting an email to the CYBERAVIA's hotline For your information, CYBERAVIA is a virtual French company whith more than 800 pilots !http://www.cyberavia.org/can-you say me what I can make ?Best JF

Hi BryanNo, when I press the button do not change the text on left display!The button of my joystick (Saitek X52) is the button 11 , X on the keyboard and Propeller de-ice on/off into FS9 Identical on joystick for the main button for PMDG 747 (F9 on keyboard & Increase decision height concorde into FS9).It's good for PMDG 747 but not for 737 iFly ?For information, the secondary button work correctly & the text change on right display.I'm surprised because for the first fly whith version 1.0, there is no problem !BestJean-François

Hello,I use FS2Crew for the following planes with FS9 : PMDG 747 - PMDG 737 - FLITH 1 ATR72-500 and A320 WILCOI am so satisfied that I waited for the exit(release) of FS2Crew for the 737iFly to take(bring) out him(it) of the shed.I managed to make a 1st flight(theft) with the version 1.0. I installed(settled) the version 1.1 and since impossible to use to engage and to answer cheklist.Nevertheless I configured well the button main as indicated in the textbook(manual worker).I made 2 installationsBut that does not work.Thank you for your help(assistant).Jean-François - a FS2Crew's fan :rolleyes:PS : Soory for my english !

:( I'm tired :( SorryBut I maintain my subject ! :After my third flight, it's very very nice to flight with FS2Crew/737 PMDG ! :(

Sorry :( This post is for FS2Crew forum Not this !!

HiAfter FS2Crew for ATR 72, I have downloaded FS2crew for 737PMDG.After 2 flights, I like !It's more difficult but I like !I have just 1 problem with AES Add'on for Airport (Aerosoft)For ex., at LFPG (beautifull scenery by Aerosoft) it's not compatible with the pushback .For my next flight at this airport, I must decrease (?) this option in LFPG.It's a pity !But ...many thanks for this add'on !Best regardsJean-Fran

HelloThanks ! It's goodMy glasses are black :( Now, I am going to download the french manuel because I don't undestand all english manuel !Best regardsP.S : FS2Crew for ATR 72 is very very good !