Cool

Argh.... I did put the file mcrzbmet.dll at the wrong place... I:\Multi Crew Experience\Support\Files\FSX\MCE dlls\ Now that I put it where it should be, it works like a charme Thank tou so much! Still regarding the metroliner, the engines incorporate a factory‐installed alcohol‐water injection system (AWI). The TPE‐331 is dry‐rated at 1,000 shp for takeoff and continuous operation. For short TO, It is wet‐rated at 1,100 shp for a maximum of five minutes from the start of takeoff roll. For this purpose there are 2 switches which are very useful the AWI On/Off Switch and the AWI Pump Selector Switch (on the pedestral right of the throttles). Would it be possible to create MCE commands therefore? Of course this is a nice to have kind of feature but :wink:

Thank you Gerald I did it but the battery command did not change: switches move but no action... I did re start FSX twice without success... Regarding "nose wheel steering", I can wait until next release except if you want me to test it before... Thanks again for your great support Pascal

Metroliner Battery ON/OFF command just move the switch in the cockpit but the action is not executed I means if I mouse click on the battery, the switch not only move but the electricity is on, as well. it is not the case with the MCE command I did not find a command for the "nose wheel steering" ARM/OFF. Does it exist? I tried a few possibilities without sucess Everything else is just perfect. Thank you very much :smile: Cheers Pascal

Hello. I have the version 2.6.33 The issue is for PMDG 777: Flaps only flaps up works fine. The commands "flaps 1, flaps5, flaps15, flaps20, flaps25, flaps30 or full flaps" does not work, copi says the command but nothing happend Logo lights Logo lights ON works Logo lights OFF does not works (copilote says logo lights swith off already) Everything else is just perfect and great!! Thanks for your reply Pascal

Hello FS++ First of all, I wish you an Happy new year!! Any news about the Metroliner? Thanks Pascal

+1 I intend to buy the PMDG777 especially for MCE that I have already. Question regarding the PMDG 777, does MCE works also for the 300ER version? I did not find any vid of the PMDG777 with MCE, do you know one? Thanks Pascal

Great everything works like a charm !! Thanks I continue my Multi Crew Experience

Hello I gave it a try and will continue. So far so good with the C17 from Virtavia !! ;-)) As I use it in conjonction with IVAO network ATC but also in communication during flight with our Virtual Airline company frequency (TeamSpeak3 channel) I woul like to have a key in order to mute or unmute the MCE mike. Of course I can click on the mike button, but to configure a button on my joystick would be more practical. I did not find how to do it and I guess I missed it Thanks in advance for your reply Pascal

Thanks for your reply It's not exactly the same aircraft but should work just like it I will give it a try Cheers Pascal

Hello I intend to get MCE especially for this aircraft. Of course I will try MCE and the C17 with the demo version but I do not have the sparetime at the moment This aircraft uses default FSX command as for autopilot and so on. Does it need to be interfaced to work with MCE or not? Thanks in advance for your reply and advise Kind regards Pascal

I am going to try SPAD. As I have also the Saitek flight yoke system, how do you uninstall only the drivers for the switch panel? thanks for your help Cool

Super, Merci beaucoupThanksPascal

Hi RonThanks for your reply, I sent the EmailBest regardsPascal

As I do not receive the registration confirmation from Eaglesoft support forum, then can't see the topic, I post here:I have the same problem when trying to load a FS flight plan (already loaded in FS)Do I miss something?Thanks in advance for your supportPascal Paillart

Hi BrianI am still in the learning curve but from preflight until cruise phase this is quite ok except that I could not manage to have the push back done after the break release. I have to press the SHFT P to do it manually...I certainty missed something but what??Thank you for your helpKind regardsPascal

Hi again BrianI succeeded to manage to do an "UNMUTE" joystick button to the 747 for FS2crew Hard Mute button thanks to the Macro in FUIPC based on a mouse click to the HM button of FS2crew main panelNice to have itCheersPascal

Hi BrianI checked how I did it in the JS41 and in fact the soft mute in the JS41 work differently than in the 747.in the js41 it is a soft switch based on the FSX command "ALTERNATE STATIC SOURCE (ON/OFF)"What I did is to affect the "Q" Key" to this function in FSX and in FUIPC I affected a joystick button to the "Q" key. As it is a switch I affected the Q when I press the button not to be held and Q when the button is released.Then if I mute the mic by clicking "HM" in the FS2crew control panel of the JS41, (M appears) then when I press the button I unmute the mic and when unpress it I mute it again...The way the soft mute is configurated in the 747 is thanks to the FS2Crew config manager and then it is not possible to do the same unfortunatlyHope I am more clear this timeCheersPascal

Hi BrianNot really but I am not very clear...In fact what I did for the JS41 was to assign a joystick button to talk to the FS2crew copilote, exactly like the ATC button but another button.I have to check how I did it with the JS41, as far as I remember, I did it with the FUIPC assignement (registered version of FUIPC)I will check and keep you informedThanks anyway for your replykind regardsPascal

Hi BryanAfter the JS41, the 747 !!A short question for now is: how I could unmute the microphone like on the JS41?in fact assigning LCTRL for instance to HM just mute but do not permit to unmute if HM is already set.Thanks in advance for your supportPascal Paillart

Well I have such a plaisure to fly with the JS41 + FS2 crew voice control that I would like to share with some pictures of an online IVAO flight LFLB LFMT during the IFR tour de France event:taxiing to h/p rwy 36:Take off from chambery:Here are the clouds:and icing!!it is getting better isn't it!in final ILS at LFMT:Finally, 2 screens on the way back to Chambery:Good flights with the JS41!!Pascal Paillart Quote MultiQuote Report

Well I have such a plaisure to use the PMDG JS41 + FS2 crew voice control that I would like to share with some pictures of a on line IVAO flight LFLB LFMT during the IFR tour de France event: taxiing to h/p rwy 36: Take off from chambery: Here are the clouds: and icing!! it is getting better isn't it! in final ILS at LFMT: Finally, 2 screens on the way back to Chambery: Good flights with FS2crew!!Pascal Paillart

Well I think I found the solution but I do not know why it happend...In fact the issue was the CTRL key which was stuck only with this saved flight.As soon as I loaded a different aircraft or a different livery of the JS41, it was ok....:Thinking:Also I understood that it was the CTRL key which was stuck...:Hypnotized:As soon as I pressed that key, everything get back right in place :( in FSXkind regardsPascal

Hi allI am still in the learning curve with the JS41+FS2 CREW....the issue I have got today at the end of a flight is that (for unknown raison) I lost the keyboard inputs...:((to be clear the keys does not correspond to what they are supposed to be...)This is when I wanted to pause FSX in order to read again the procedure of FS2 CREW + JS41 in final ....I could not stop it whatever pressing "P" or "pause"After landing I restarted the computer and try again:Now each time I load the JS41+FS2 crew after the default flight, then I loose the keyboard inputs. This is reccurent.I do not know what I did wrong to get such a problem.But this is really ennoying I can not use the keyboard; only the Keypad seems to work okthanks in advance for your advisesPascal

Hi BryanYes I do confirm that Installed the English-US version thanks to Vistalizator full install and it works fine.Thanks for this very nice software which make a real life in the flight simulator !!! :Applause:Pascalps; I have another new issue, then I will create a new topic.

Finally I got it right I think :Whew:I continue the installqtion steps then,,,,ThanksPascal