luukguus

So you're saying it's because of the strange lines in the VC? I indeed have to update my computer... Have you experienced the same problems as I have? The plane over speeding while vnav is on? Thanks for your reply!

They were set at full throttle. However, I tried alternating the position which didn't change anything. Thanks for your reply though! Nope FSX I don't think so. I set the winds myself and didn't download any real world weather. For fl410 I had winds 360/40 and light turbulence. I did later try to ease the winds down to 360/20 which at first didn't help but after a while the airplane just started to fly at it's set speed again. Very strange... Thanks for your reply though!

I have taken a print screen so you guys can see for yourself. There's also these strange lines that sometimes appear in the VC. However, as you can see everything is engaged (AT, AP, VNAV, LNAV) and the plane is overspeeding while the vector is set on mach 0.79. Also, the engines are operating at almost full power.

Hi everyone! I was just flying my Finnair 737 from EFHK to EFRO. I usually take off and turn vnav and lnav on around FL150 and just start watching tv. When i came to check on my airplane, i noticed it was overspeeding on vnav! I tried switching to alt hld and manually adjusting the IAS but this didn;t seem to do anything. I was flying at FL410 with winds 360 at 30 and light turbulence. The AT wouldn't even throttle back! I also fully configured the FMC for the flight (put in weather data etc.) Does anyone know what is going on and what could have caused this problem so i can prevent it in the future? Thanks for your help!

Hi everyone! I have had this problem for a while now (on both my FS9 and FSX actually) but it's really starting to annoy me right now. Whenever I make a flight my FS window mimimizes on it's own and bringing me back to my desktop. And whenever I try to re-enter FS there's just a black screen. For FS to work I have to start up the tast manager and activate it from there to continue my flight. It's not as big of a deal for FSX as I can simply run it with the window unlocked but whenever I run FS9 with the window unlocked my FPS drop drastically for some reason. When I'm running on full screen I'll easily get 60FPS but when I run unlocked screen I never get above 20FPS. I think it has got something to do with the windows uodate from a while back. I'm currently running Windows 7 64bit with the latest updates installed. Can anyone help me fix this problem? Thanks very much!

Thank you! The trim didn't go nuts everytime I flew in beginner mode. Does the trim problem just happen random or always? Because I only had it one time in like 11 takeoffs in biginner mode Thanks again!

Hello everyone! I had a problem with the MERGED airplane. When I took off from LFMN (Nice) the airplane trim suddenly went all the way down. Am I doing something wrong? Or is there a problem in the merge? I did change joystick at the ground and I set the simulation speed at 4X while taxiing(so both on the ground). Maby that has something to do with it. Hope someone can help me! Greetings Luuk

Hello, A while ago i flew the ifly 737 from Brussels (EBBR) to Rotterdam (EHRD). When I took off from Brussels and turned the autopilot on the airplane leveled off/descended and it accellarated to very high speeds. I can't remember my exact altitude but it was right after takeoff. Can anybody help me? Thank you! Greetings

Hello, A while ago i flew the ifly 737 from Brussels (EBBR) to Rotterdam (EHRD). When I took off from Brussels and turned the autopilot on the airplane leveled off/descended and it accellarated to very high speeds. I can't remember my exact altitude but it was right after takeoff. Can anybody help me? Thank you! Greetings

Hello, I think the engine override was pushed, here is a picture of the situation when it first happened.(sorry but it's a photo) Could you determine what happened? Greetings and Merry Christmas!

My F7 key was not working and i was a little fast. Thanks for the help! Merry Christmas

Hi everyone, I've got another problem with the MD-11, I flew an approach at EHAM RWY 06 and paused the simulator to extend the flaps, But when I landed I saw a warning saying ENG3-2-1 FADEC ALTN. What caused this and what does this mean? Greetings!

Thanks for the help everyone! I am now only struggeling with the stall problem. I am running in manual mode but my problem is not how the airplane stalls, but the controls in a stall are my problem. When the aircraft stalls the controls lock upwards, but I can't do anything to recover the airplane. And when I use anothet joystick the airplane will recover. Maby it has something to do with my joystick. Do i have to recalibrate it or something like that? Greetings!

Hi, Thanks for the help, i solved 1 problem now. Still i don't know what happend with the one throttle thing and the stall thing. Here are another few pictures from the stall situation Thanks for the help Greetings!

Hello, I've got several problems with the PMDG MD-11, 1. When the airplane overspeeds the controls "lock" 2. When I use 2x speed or 4x speed only one engine throttle works. 3. When the airplane is flying too slow the controls lock upwards so it only gets worse, i've already checked my trim Thank you Greetings! More pictures <<IMAGES REMOVED BY MOD - Momtchil, 24/12/12 I'm sorry but your attached images are way too big, they're both over 1.4MB! Causing significant slowdowns with this thread. They've been removed. Please follow our rules and make sure any images you attach are each 400kb max! Instead of taking photographs, you can easily take a screenshot of whatever is on your monitor with print screen (the 'PrtSc' button on your keyboard, full info here: http://en.wikipedia....ki/Print_screen ) and edit it to acceptable size with a variety of graphics editing programs, including GIMP ( http://www.gimp.org/ ) - which is free. >>

Hi everyone! I had a problem with the merged wilco project airbus a380. When i took off from Paris Charles de Gaulle the a380 suddenly banked left and then went back to normal level flight. Has anyone experienced this before? And does anyone know what the cause is of the problem? Like a glitch or a problem in the merge or am I doing something wrong myself? Can anyone help me, please? Thank you! Greetings

I fly the pmdg 737 a lot but when i am at my cruising altittude (11,000 ft) whil making a flight from brussels to eindhoven i get an error in the cdu scratchpad saying V Speeds unavaildable. While i am cruising at 11,000ft. Please help me!