clocki

The manual did not really helped me much. Still the same problem. To be honest I don't understand why such a product makes such problems in such a simple thing. Never had these problems with other addons. I have a registered version of FSUIPC but never used it to configure my Joystick and also never used another joystick since I started FS. It's still my Saitek Cyborg Evo since FS2004 It's really frustrating to not fix that problem :( I simply do not understand what could cause that and that makes me angry

Thanks for the idea. I loaded up P3D to calibrate as I to be honest haven't done that. But it didn't help. The cpan recognizes my inputs but thats all... On the pics below you can see that with different throttle power settings the rudder also changes??? On the pics the yoke is in neutral position and I only moved the throttle. First is with minimum power the second with full power.

Hey guys, I'm really getting problems with flight controls and not get them working. Maybe it's I'm not used to props... the elevator is inverted the rudder is not working and when trying to taxi or take off the pedals are "pulled" to the left side after trying to enable 125Mh controls I had no controls That problems makes me stop trying to learn to fly the Dash. My system: Dash 8 Pro Edition P3D V3.2 Windows 7

Thanks Chris for your help, the first issue is fully solved. It was the solution you described but other way round. I had the newest patch for the 3.2 so I applied the older patch and it worked. Now I'm only struggling with the flight controls as they are not working. I will open another thread.

Hey folks, when starting the Dash 8 Pro with the newest update I get on my P3D 3.2 the message after loading the plane that the gauge is for P3D 2.0 and lower and I should go to the support page. But there is nothing inside the FAQ? Another thing: Sometimes the Dash is stopping for maybe 1s and then continuing.It's only the plane not the sim itself. After that she continues...Don't know how to describe that best :/ How to fix that as it's a bit disturbing

Hello mates, I had that topic maybe 2 years ago or so while using the FSX version. Now in P3D I'm still having the same problem that the 777 is not following the nav line (LNAV) in some areas. It starts shaking and drifts to the left right or somewhere else. See the photos please they describe best what's going on. Last time the advise was to use another weather tool. But I don't see the point buying a new weather tool as FSGRW is normally doing good job. The problem occurs normally when flying over the big "lakes" and not very often over the country. Of course I'm using the newest version of P3D+PMDG+FSGRW+FSUIPC if that helps a bit.

Hello simmers, since V3 I'm having much problems with OOM's on nearly every flight and even on simple flights. Never had that on FSX or 2.5 (afaik). I'd like to describe you my flights so you know what I've done. I have reinstalled V3.1 after removal of 3.0 as I thought there could be a V3.0 problem. So the sim is currently only running with the named addons and nearly clean on that. 1. flight test (on 3.0 with a full sim) Flight from Hannover (German airports) to Mallorca (Aerosoft) with the PMDG 737 and ORBX Vector+Global+OLC;FreeMeshX but no other photoscenery etc. The flight at all was fine but on 12nm final of Mallorca I got an warning of high VAS load via FSUIPC. I looked into a program and saw I'm on 4,1GB. Maybe a mile or two later I got the OOM error of course. 2. flight (still 3.0) With the same full sim and that flight was only with FSX AFCADs from avsim.com on rather normal airports. Started LHBP towards ELLX with the B777 made by PMDG. Overhead Germany I already got an OOM error. Reloaded my flight and continued towards ELLX. Here the same on approach. Sadly I forgot to look after the VAS :/ 3. flight ( 3.1) Scenery installed is only Aerosoft Düsseldorf, FlyTampa Vienna and ORBX Global+Vector and FreeMeshX. On departure with the Aerosoft A319 I had a VAS usage of 3,72GB. That was on DEPARTURE!! Overhead Germany and northern Austria the VAS went down to 3,6GB. During approach on the arrival route and 25nm final I then had already again 3,8GB. Approaching the runway with low visibility and 3,9GB I got the crash with OOM error. There was no other airport scenery installed like Munich,Frankfurt which we crossed. On 3.1 I did not that much test flights but on another local flight the VAS usage was very high without any scenery. Always 1,6GB-2,2GB and it's not releasing memory when leaving the area :/ I work as paramedic in 12h shifts so flying (within P3D) is good to relax and makes much fun. A very good thing to start a flight after a night shift But thats currently not possible without 1-3 restarts of the sim. I would like to know where the problem is. Is it mine fault I made during installation or during config? Is there a possible setting I made false? Is it a software problem? Is it a user fault? ......... My system: Windows 7 x64 Intel i5 4670k 3,50Ghz but overclocked to 4,2Ghz by factory 8GB RAM Nvidia Geforce GTX 770 2GB (Res in the sim 1920x) If needed I can upload the Prepar3D.cfg to see the my settings and the few tweaks. Happy New Year

Hey guys, just preparing V3 to do some flights but what I recognised is that for example Mega Airport Munich is too bright around the runways. The landclass is in the night too bright so you can see all details which is that real I guess.

I just searched through avsim but mostly they point to a reinstall or a general windows problem or FSX problem. But Windows+FSX+other programs are working fine. It seems to only affect P3D. :(

I already removed GSX and the relative FSDT folder within P3D. But no effect. I've also disabled the new installed FlyTampa Copenhagen+Dubai scenery to be save. No result. Don't think it's GSX in special, maybe a DLL causing that? I installed GSX then done 1 flight and after a restart I had it not active anymore on any airport. So I thought reinstall would be useful. I had a similar situation after installing EZCA but then a new version of FSUIPC seemed to fix the crashs.

Hey mates, I recently bought GSX to use it within P3D 2.5 latest version. But P3D crashes on start up without a special warning/notice/hint. Just the message cames up if I like to send the report and like to restart P3D. Before the installation of GSX it worked fine. Anyone has an idea? EDIT: I just removed GSX but P3D still crashes on start up. Only installed some payware sceneries and no other tools.

Hey folks, what keeps me a bit away from P3D is the point that always I fly the distance looks so flat even I have the LOD setting set to ULTRA. That looks very strange and unreal and my FSX looks a bit better. Maybe a problem is that you can't edit the distance within FSGRW where the "distance" is blocked and filled with a kind of fog. That looks kinda good for me. Also a point is the flickering of some textures. I tried it with Nvidia inspector and without. Always other planes are flickering in the distance. And the docking systems at the gate also always flickering. Looks very strange :/ Is that a gernal LM problem or more a setting/video card problem? System: Windows 7 8GB RAM i5 4670k GTX 770 2GB

Could you do an AirMed Hawker? I know its the 800 and not the 850 but the coloursheme is basic what Carenado already gave to us. So a professional painter only needs to change the reg, the colours and add the logo. https://en.m.wikipedia.org/wiki/AirMed_International http://jetphotos.net/showphotos.php?regsearch=N812AM&view=true Thanks

Hey Richard, they are all looking very good :) I'm already using your first light blue paint posted in another thread. Could you maybe also do some European ones? Like Global Jet Austria, Comlux Aviation, NetJets Europe or simple some European regs? By the way there is a LY-DSK (lydsk.zip) paint available but for it does not work as it seems some alpha channels missing?

Hey guys, I'm trying to get the Hawker in the air and learn to fly her to finally make online flights with real ATC. At all the basics are working good but some small questions coming up, maybe someone can help: 1. How to do a RNAV approach? - it's clear to select it in the FMC but I always thought that RNAV/GPC/RNP/... using VNAV+NAV to replace the LOC+GS. But the Hawker does not have VNAV?! 2. When climbing/descending to an cleared ALT the AP is not stopping at that ALT? Correct? I'm currently mostly using Pitch for DEP and V/S for others things 3. Does the APU has any use? If I turn the APU on I have some bars lighted up for cooling but it seems that is not modeled too. Also battery seems to be affected when APU is off. Thanks for your help PS: Carenado if you read that...please provide better information and maybe add kinds of tutorials for users :/ This is not a common A320 everyone knows :(

Hey mates, wanted to do my second flight on P3D. Flight should be EGLL-KSEA with UK2000 and T2G Seattle. On a short performance test for UK2000 I noticed that on approach the buildings and ILS lights on the masts are extremely flickering. I set my P3D up after the instructions on the simmershome.de page. Did not have had that problem on a flight from EDDS to LEPA with Aerosoft scenery :o Here is my P3D.cfg for the settings: https://www.dropbox.com/s/09utt6q5j5w1hnn/Prepar3D.cfg?dl=0

Looking very good and it doesn't matter that they have a more basic and smart livery. Looks really stunning Hope to see more and more coming even with different registrations from other countries

Thanks Perry for that link. Nice to know as I had on my offline testflight problem to get the ILS working. Made a manual landing and I have to add the Hawker flies very nice That's why I need to learn more about the plane as I intend to make some nice rotations to US/Canada airports made by ORBX Maybe someone will post a full tutorial in the future...

Good midday, I was wondering if there is maybe somewhere a kind of tutorial flight available to get more used to the Hawker. I was very happy about such tutorials for example made by the famous Jens Albert Schenk he made for the 747,Maddog and the DA Fokker 100. That was for me the best way to learn to the fly the 747 and Fokker. Of course the PDf delivered by Carenado are nice but quite basic according to the flight procedure for people coming from Airbus (/ Boeing). Greetings

@onebob I use the latest versions of both programs. EZCA 1.18.6 and P3D 2.5 with the latest hotfix. And of course I already read the link as I got the download from that side. But I can not find a specific problem/answer their to my problem. It's most about FSX installation. I now tried to remove the entry from the dll.xml but the problem still occurs. No idea why P3D is crashing on startup? I would really like to try P3D :/

Hey, I'm currently setting up P3D next to FSX. At all all worked fine with some tutorials and so I wanted to do some flights. For that I need EZCA to fly inside the VC. But EZCA is causing P3D to abort the start with the error "Prepar3D.exe is not working....searching for a solution via internet". And ECZA says simulatouns "FSX process not found". In FSx it's working Do you havy an idea?

One thing I do on most bigger and more detailed airports is to restart FSX after a while. If I'm going from EGLL to OMDB/CYUL/CYYZ/KJFK I know I already have a high VAS load due to EGLL+777. In the air that makes no problem but if approach the area of the airport I will get problems. So if you have FSUIPC as payware version you can simply tick the option to use AutoSave. That will save everything and with the PMDG it works very well. I mostly restart FSX when over not detailed scenery or short before T/D. That can give you some more VAS space as the previous airport is out. Hope that additional helps

I have some problems with getting the BK117 in the air. As there is no Cold&Dark most switches are already set according to the checklist. But I always have on the annunciator panel a red "ROTOR RPM" warning. N1 always stays at 70%. Also I'm not able to start the engine when coming from a MS Cessna with everything turned off. The manual is not that helpful as you might think. Anyone has an idea or a work around?

I now found the mistake. I can't explain why that happend but I guess it happend during the removal phase. EZDOK removed a whole section for the VC within the cameras.cfg. Therefore no world cam and VC could be found. Putting the VC section into the cameras.cfg solved the problem.

Hello, I'm currently crusing to China heading from Dubai. I'm currently on FL330 with massive tailwind. And I'm still having the wing condensation :o I checked your homepage and there it says the AOA has to be 5°. I activated it in the PMDG and it shows 3. On the PFD it's same it's there maybe 2,8° UP. Look at the pictures to see what I mean: PS: I have also your other package installed. And your homepage with the explanation of the features/conditions is very well done!!