Not_Boeing_Not_Going

thank you

Hi. Is it worth to buy such addon.thanks

thank for reply but what is the difference between REX and overdrive? i do not want any interference between active sky cloud art and rex. Does REX replace airports buildings textures?

Hi guys, I need your advice to decide which to buy REX Airports HD or Zinertek HD or REX DIrect. Which one is the best for visual enhancements. I fly FSL lab a320 with ASN and ASCA, GSX and DX10 Scenery fixer. I want best graphics with best FPS. thanks.

thanks for reply, arnav is free but it is in USA only, other are not free. thanks

What do you use for charts viewing navigraph charts or other sources thanks.

yes you have to pay the difference only and it was officially stated.

Finally it is here

Absolutely performance and outdated graphics. I hope we would have a new sim that will be built from scratch and working like a background screen that reflects outside visuals at 60FPS and it is not affected by complexity of the aircraft being flown so we could fly complex aircraft such as PMDG, FSlabs that their simulation engine is independent from graphics engine but the two have interconnection to locate aircraft location, altitude etc.

2d panels for trouble free sim.

yes, you are right, the 2d panels have blown my mind, recently iam flying the ifly alongside the NGX both with 2d panels, clear panels for reading and learning, more FPS hence more details of graphics options so nicer and faster simulation, i hope the PMDG 777 get 2d panels so that it can be flown alongside NGX and IFLY. 2d panels are used by PS standalone simulator which a costs a great amount of money and it is very complex sim but the developers had knew that making 3d cockpit will cost time, performance and develops huge amount of technical difficulties and low performances. thanks

Dear LM Team, please consider this found as first priority because it converted P3D to playable simulator with good FPS, thank you.

I think lockheed martin should really consider this found seriously, because it is not mentioned on their performance tuning guide !

hi, i need values for : FIBER_FRAME_TIME_FRACTION=0.33, [JOBSCHEDULER] AffinityMask=14, TextureMaxLoad=6, SWAP_WAIT_TIMEOUT=30

hello, what type of cpu do you use?! nice FPS !

[DISPLAY] TextureMaxLoad=6 Non-Default entry. This entry will not exist in your Prepar3D.cfg file by default and must be added to the file. Performance Tuning Tip: This can induce stutters. Use multiples of 3 only such as 3, 6, 9, etc. This is perfect for photorealistic scenery [TERRAIN] SWAP_WAIT_TIMEOUT=30Non-Default entry. This entry will not exist in your Prepar3D.cfg file by default and must be added to the file. Performance Tuning Tip: This variable is the number of frames that the terrain engine will wait for terrain textures to be loaded into video memory before forcing new tiles of terrain triangles to be rendered. UseGlobalTerrainView=TrueThe default falue is False. Performance Tuning Tip: By default, every camera has its own terrain view which requests texture and dem tiles near the camera to ensure that all cameras get a quality view of terrain. When tessellation is enabled, it is possible for cameras to share data and avoid the extra work required to manage multiple terrain views. For multi-view scenarios in which all views are near each other, it may be desirable to have views simply render the terrain tiles loaded by the default view. Setting this option to True will prevent all camera from creating a terrain view except for the default 3d view. This can help avoid texture flashing and terrain spikes that occur on some systems with multiple views and/or multiple video cards. This value can be overridden by the UseGlobalTerrainView entry in a given CameraDefinition allowing each camera to determine whether or not to create a terrain view. This setting will be engorged if Tessellation is not enabled. [GRAPHICS] SHADER_CACHE_VERSION=1Non-Default entry. This entry will not exist in your Prepar3D.cfg file by default and must be added to the file. Performance Tuning Tip: Using this rebuilds your shader cache by incrementing the number each time you make a change to the Prepar3D.cfg. Hi simmers, i would like to know what values do use for below suggested tweaking from Lockheed Martin and what type and frequency of CPU do you use?! thanks [JOBSCHEDULER] AffinityMask=14Non-Default entry. This entry will not exist in your Prepar3D.cfg file by default and must be added to the file. Performance Tuning Tip: By default, Prepar3D will use all available processor cores. On machines with four or more cores, it will dedicate a core to rendering tasks. The easiest method for modifying the affinity mask is to open the windows calculator in programmer view, select the binary display mode, and flip the bits in the binary number displayed to select which cores the application should run on. Note that the cores are represented right to left. [MAIN] FIBER_FRAME_TIME_FRACTION=0.33Non-Default entry. This entry will not exist in your Prepar3D.cfg file by default and must be added to the file. Performance Tuning Tip: This setting, which defaults to a value of .33 (33%), defines the percentage of each frame that is devoted to loading scenery. Increasing this number can reduce "the blurries", but it can cause stutters, and can also reduce the overall frame rate. Try reducing the number to the lowest level where you still get smooth scenery paging. This will vary depending on disk speed as well as the type of flying, as well as the selected scenery settings.

thank you all for help and reply

aha i will search for that , thank you again Iam very sorry, i used to write with caps lock because i am mechanical engineer and words have to be capital letters on drawings

CAN YOU GIVE ME THE LINK OF THE GUIDE YOU HAVE USED?! THANK YOU AGAIN

I THINK YOU ARE RIGHT..THANK YOU MAN

thank you

ref

thank you very much sir for your reply and time

ref

I need the best guide to optimize P3d v 2.5 because i have low FPS ( with PMDG 777, 737) EQUALS TO 13 FPS. I have medium setting. Below text shows my P3d settings and PC specs. thank you. Pc spec: Core i7 920 @ 2.97 Ghz Nvidia GTX 750 TI 2GB 8 GB RAM MEMORY P3D SETTINGS: [GRAPHICS] TEXTURE_MAX_LOAD=1024 NUM_LIGHTS=4 MIPMAP_VC_PANELS=1 TESSELLATION=1 COCKPIT_HIGH_LOD=1 AIRCRAFT_REFLECTIONS=1 LANDING_LIGHTS=1 DAWN_DUSK_SMOOTHING=1 LENSFLARE=0 HDR=0 BLOOM_LEVEL=2 SHADOW_QUALITY=2 TERRAIN_SHADOW_CAST_DISTANCE=0 CLOUD_SHADOW_CAST_DISTANCE=0 OBJECT_SHADOW_CAST_DISTANCE=2 CONTENT_NO_SHADOW=0 INTERIOR_SHADOWS_CAST=1 EXTERIOR_SHADOWS_CAST=1 SIMOBJECT_SHADOWS_CAST=0 TERRAIN_SHADOWS_CAST=0 VEGETATION_SHADOWS_CAST=0 BUILDING_SHADOWS_CAST=0 CLOUD_SHADOWS_CAST=0 INTERIOR_SHADOWS_RECEIVE=1 EXTERIOR_SHADOWS_RECEIVE=1 SIMOBJECT_SHADOWS_RECEIVE=0 TERRAIN_SHADOWS_RECEIVE=1 VEGETATION_SHADOWS_RECEIVE=0 BUILDING_SHADOWS_RECEIVE=0 SHADOW_NUM_CASCADES_LOW=4 SHADOW_NUM_CASCADES_MID=5 SHADOW_NUM_CASCADES_HIGH=7 SHADOW_NUM_CASCADES_ULTRA=12 GROUND_SHADOW_TEXTURE_SIZE=2048 CLOUD_SHADOW_TEXTURE_SIZE=512 SHADOW_LOG_PARTITION_LOW=0.850000 SHADOW_LOG_PARTITION_MID=0.850000 SHADOW_LOG_PARTITION_HIGH=0.850000 SHADOW_LOG_PARTITION_ULTRA=0.850000 EFFECTS_QUALITY=1 EFFECTS_DISTANCE=1 [DISPLAY] SKINNED_ANIMATIONS=1 TEXTURE_BANDWIDTH_MULT=30 UPPER_FRAMERATE_LIMIT=25 TEXTURE_FILTERING=2 MSAA=2 SSAA=0 FXAA=1 VSYNC=1 TRIPLE_BUFFER=1 WideViewAspect=0 FullScreenExclusive=1 FullScreenAutoFill=1 [PANELS] PANEL_OPACITY=0 [sCENERY] IMAGE_COMPLEXITY=2 [TERRAIN] LOD_RADIUS=4.500000 TESSELLATION_FACTOR=85 MESH_RESOLUTION=21 TEXTURE_RESOLUTION=25 AUTOGEN_VEGETATION_DENSITY=2 AUTOGEN_BUILDING_DENSITY=2 DETAIL_TEXTURE=1 WATER_REFLECT_CLOUDS=1 WATER_REFLECT_USERAIRCRAFT=1 WATER_REFLECT_SIMOBJECTS=0 WATER_REFLECT_TERRAIN=0 WATER_REFLECT_AUTOGEN_VEGETATION=0 WATER_REFLECT_AUTOGEN_BUILDINGS=0 WATER_REFRACT_CLOUDS=0 WATER_REFRACT_USERAIRCRAFT=0 WATER_REFRACT_SIMOBJECTS=0 WATER_REFRACT_TERRAIN=0 WATER_REFRACT_AUTOGEN_VEGETATION=0 WATER_REFRACT_AUTOGEN_BUILDINGS=0 ENABLE_BATHYMETRY=0 WATER_CLARITY=30 WATER_DETAIL=2 [WEATHER] CLOUD_DRAW_DISTANCE=8 DETAILED_CLOUDS=1 OPTIMIZE_DENSE_CLOUDS=0 CLOUD_COVERAGE_DENSITY=8 THERMAL_VISUALS=0 DownloadWindsAloft=0 DisableTurbulence=1 DynamicWeather=0 VolumetricFog=1 [TrafficManager] AirlineDensity=0 GADensity=0 FreewayDensity=0 ShipsAndFerriesDensity=0 LeisureBoatsDensity=0 IFROnly=0 AIRPORT_SCENERY_DENSITY=0 [AContain] ShowLabels=1 ShowUserLabel=0 ShowLabelManufacturer=1 ShowLabelModel=1 ShowLabelTailNumber=0 ShowLabelDistance=1 ShowLabelAltitude=1 ShowLabelAirline=0 ShowLabelAirlineAndFlightNumber=0 ShowLabelFlightPlan=0 ShowLabelContainerId=0 ShowLabelAirspeed=0 ShowLabelHeading=0 LabelDelay=1000 LabelColor=FFFF0000