SquadronLeader

No - but thanks for that suggestion Many thanks for that guidance. I had mapped my button to 'Toggle Autopilot Master' - so will change it to Autopilot Off on my next flight

The AP disconnect button did not turn off the yaw damper - I tried binding them both to the same button - and it was inconsistent - so I bound the yaw damper to a separate button. Guess the point is, as suggested by alexcolka - I needed to disconnect the yaw damper prior to landing, to give me control of the rudder and front wheel. Thanks and happy flying.

That's even more interesting as I do have an AP disconnect button mapped, and always turn the autopilot off before landing. Have just not noticed as to whether that also disconnects the yaw damper as you suggest. Will try another flight tomorrow and report back. Thanks

Ah, that makes a lot of sense - will give it a try on my next flight. Many thanks.

What are quick views and how are they accessed?

Love this plane and have just updated to version 1.0.4. Here is my issue. I do not have separate tiller and rudder selected in the settings option. When taxing to the runway and taking off, the tiller and rudder work as expected using my rudder pedals (which do not have a toe brake) However, when I land that flight, both the tiller and rudder are unresponsive, and I have no control over them with my rudder pedals. Assume that something I do (or not do) locks the tiller and rudder. Can anyone help me resolve this. Thanks

I looked and searched for an 'unpause' binding in MSFS 2024 with the keyboard as the selected control. Could not locate it. Can you guide me to it's location. Thanks

Hi, I am in a flight in which I selected 'Pause at the top of descent' in the settings. It has paused but I cannot see or find an option to unpause it. I unticked the 'pause at top of descent' within the settings and tried esc and then resume and neither worked. Can anyone help me with this?

Is anyone else experiencing problems getting the download to start? - I am still in the queue after an hour!

available at Orbx OrbxSkyward Simulations Citation Sovereign+ - Microsoft Fligh...A highly detailed simulation of the Citation Sovereign+ for Microsoft Flight Simulator The servers are VERY busy - being trying for 30 minutes to start my download

Thanks - I use FlowPro - so had not noticed that it was in the menu bar - now sorted. Many thanks guys

I have purchased the Phenom 300E Have not seen any option re the FBO - so my question is - how do I access it?

I cracked it. !!!! I needed to ensure that the left and/or right screen are in Split View prior to transferring the window control from the center screen. To achieve the split screen go to PDF settings on either the left or right screen and change the view from full to split. Hope this may help some of my fellow simmers.

Thanks Funke D. Not sure as to how you 'hold the top of the knob and drag to left or right' . If I click the top of the left knob (to hold it) below the GTC, I get the touch pane, and that clearly serves a different function. If I place my mouse cursor to say the left of the same knob, I see the arrow, and whether I click and drag or just drag, the window control does not change, either on the left or right. I am in 'modern' control mode.

I have just watched A330 driver's tutorial for the Phenom 300, To change which window control is being used on the G3000 - he shows switching windows by placing your mouse left or right on the left knob below the GTC. I see the arrow, but when I click on it (as A330 driver suggests) the window control does not change. What am I doing wrong?

Thanks for this - it crossed with my last post

Using my binding for 'Toggle Gear' does not work with the water rudder, which is what I would expect. I have bound a button to 'Toggle Water Rudder' and that does not work. I think it should only works when on water, which is when I am trying to use it. Any other thoughts?

Loving the caravan and have just started flying the amphibious variant. Have bound different buttons to 'toggle water rudder' and I cannot get the binding to work. I can use my mouse within the cockpit to move the lever which lower and raises the water rudder - cannot understand as to why I cannot bind them to a button. Any thoughts?

Many thanks Aamir - I will do - just thought I could sort it out myself - but obviously not on this occasion.

Uninstalled and reinstalled - changed Fenix aircraft variant - and still experiencing the same issue. Not sure what to do next.

MSFS 2024 with the Fenix A319 CFM with wing tips and the ITA livery Going to uninstall and reinstall to see if that works

Aamir - I have left it for plenty of time to initialise - every other display initialises fine - and I have been flying this aircraft since its release - so am very familiar with the 'waking up' and 'initialising' procedures. Whereas the FD's, speed and heading indicators are flashing - the altitude in steady.

After a week or two flying GA, I have just returned to the Fenix A319 and spawned it on a ramp at LIML. When it loaded up, both FD indicators together with the speed and heading indicators were flashing on and off. I thought this might be a random failure, but have been unable to find such a failure. Checked the breakers, and the settings to no avail. Then downloaded the Fenix again, and spawned it at the same location - still get the flashing indicators. This happens whether I am on ground power or the APU. Never had this before - has anyone else experienced it - and does anyone have any suggestions how to fix it? Happy flying days.

Came across this last week, and now see that one of our community has made a video about it - so here you are.

Found this post on another forum - liked the content - and the author said he was happy for me to share further. FR24 to SimBrief — Quick OFP Generator Wanted to share a free tool I’ve been working on: fr24tosimbrief.com The idea is simple — grab a flight from FlightRadar24, paste the link, and it pulls all the flight data (origin, destination, aircraft, airline, route) and sends it straight to SimBrief to generate your OFP. No more manually typing in airport codes. The aircraft ICAO type gets pre-filled automatically, but you’ll still select your specific airframe (Fenix, PMDG, etc.) on SimBrief’s dispatch page once it opens. What it does: ∙ Paste any FR24 link (live or historic flights) and it auto-fetches the flight details ∙ One click to generate your OFP in SimBrief with everything pre-filled ∙ Override the aircraft type if you want to fly something different than what’s on the real flight ∙ Flight Finder tab if you don’t have an FR24 link — pick an airline, aircraft, and departure airport and it generates a realistic destination. It factors in real-world aircraft range and matches airport size to your aircraft type, so no CRJs landing at tiny GA strips or Cessnas pulling into a widebody gate. If you pick an airline, it prioritizes airports they actually serve. ∙ Flight length preference (short/medium/long) so you can match your session time ∙ Works on mobile too It’s completely free, no account needed. Just been building it as a side project because I got tired of the copy-paste routine between FR24 and SimBrief every time I wanted to fly a real-world route. Would love to hear any feedback or feature suggestions. Check it out at fr24tosimbrief.com