Jump to content

Juergen

Members
  • Content Count

    214
  • Donations

    $20.00 
  • Joined

  • Last visited

Everything posted by Juergen

  1. Hi Bobcat, Yes it is confusing and that's why I wanted to clarify. I do have the B747 as well as the B787 showing up on the aircraft selection screen, so the correct version must be installed. Thanks for help
  2. Hi, I have downloaded MSFS2020 Premium Deluxe Version from the MS store. When I open the game and check the “Official Content” menu in the “Marketplace”, I see the following logo’s: Premium Upgrade (Owned and Installed); Deluxe Upgrade (Owned) and Premium Deluxe Upgrade (Owned). If I click on either the Deluxe Upgrade or Premium Deluxe Upgrade icon, I get OWNED, DOWNLOAD and GO TO CONTENT MANAGER selections. Q: DO I NEED TO INSTALL THESE UPGRADES SEPARATE AND AGAIN? Thanks for help Juergen Mader
  3. As I said there is a input "Steering Axis" but it doesn't do anything. I mapped a dedicated tiller to it but it does not show the behavior of an axis. So since there is also no option in the A320NEO to use the tiller, I believe I have to wait for an update from MS. I am sure you could map an axis in FSUIPC 7 to send a steering command, but which command is assigned to NW in the simulator?
  4. Hi, I downloaded MSFS2020 and am struggling thru the setup and getting it to run. When I fly in P3Dv4 I have a tiller for steering the nose wheel. In MSFS2020 there is a command "SET STEERING" under Miscellaneous and I mapped my tiller to that input. However, it does not steer/work e.g. in the A320 NEO. Does anyone use anything other than rudder pedals and twisting the joystick for nose wheel steering (separate device). Also I am not sure if the default aircraft support nose wheel steering without rudder. Thanks for reply
  5. Hi, does anyone have my problem: if I go to control > slect my controller and profile > click on Sensitivitybutton > I only get DONE, but no curves to be adjusted. Any suggestions are appreciated
  6. Hi, Do it, it's great. I did the A320 and the 737. Worth the money, say hello to Capt'n Chris Rigby from me. All the best Juergen Mader, Tampa Florida
  7. Hi Bobcat999, That seems to work. BTW were in your neighborhood last year (Coventry) to use a 3D flight simulator at Flight Simulator of Midlands. Beautiful country Appreciate the help
  8. Hi, I would like to know if there is a proper sequence to EXIT (shut down the simulator) when you are in flight (e.g. P3D: pause the sim with P and press Ctrl + C to shut it down)? Thanks for response
  9. Hi, I need some help with getting the A32NX to show up in the Livery selection of MSFS2020. I downloaded the stable version at FlyByWire.com "flybywiresim-a32nx.zip", unzipped the folder and copied the "A32NX" folder into my "Community" folder. When I open MSFS2020 and select Airliners / Liveries only the default A320 NEO is available. Appreciate any tips / help Brgds Juergen Mader
  10. Hi, I have solved my problem - two hat switches in ChasePlane. You need a paid version of FSUIP. Program both controller hat switches as buttons and assign a key press. The typical buttons are 32=0deg, 34=90deg, 36=180deg and 38=360. Than look at your FSUIPC.ini file and you will see sequential numbers for the buttons you just programmed. Now there are buttons for a diagonal movement: 33=45deg; 35=135deg; 37=225deg and 39=315deg. These buttons I copied/ pasted and edited in the FSUIPC.ini file, e.g. 45 degree movement or button # 33: is button press 32 and 34 simultaneous and that's why there are two entries in the .ini file. Here is the pertinant info of my FSUIPC.ini: [Buttons] PollInterval=25 ButtonRepeat=20,10 0=R2,32,K68,10 -{Key press: ctl+D}- 1=R2,33,K68,10 -{Key press: ctl+D}- 2=R2,33,K72,10 -{Key press: ctl+H}- 3=R2,34,K72,10 -{Key press: ctl+H}- 4=R2,35,K72,10 -{Key press: ctl+H}- 5=R2,35,K75,10 -{Key press: ctl+K}- 6=R2,36,K75,10 -{Key press: ctl+K}- 7=R2,37,K75,10 -{Key press: ctl+K}- 8=R2,37,K70,10 -{Key press: ctl+F}- 9=R2,38,K70,10 -{Key press: ctl+F}- 10=R2,39,K70,10 -{Key press: ctl+F}- 11=R2,39,K68,10 -{Key press: ctl+D}- 12=R3,32,K68,10 -{Key press: ctl+D}- 13=R3,34,K72,10 -{Key press: ctl+H}- 14=R3,36,K75,10 -{Key press: ctl+K}- 15=R3,38,K70,10 -{Key press: ctl+F}- 16=R3,33,K68,10 -{Key press: ctl+D}- 17=R3,33,K72,10 -{Key press: ctl+H}- 18=R3,35,K72,10 -{Key press: ctl+H}- 19=R3,35,K75,10 -{Key press: ctl+K}- 20=R3,37,K75,10 -{Key press: ctl+K}- 21=R3,37,K70,10 -{Key press: ctl+F}- 22=R3,39,K70,10 -{Key press: ctl+F}- 23=R3,39,K68,10 -{Key press: ctl+D}- 24=P3,4,K51,26 -{Key press: alt+ctl+3}- 25=P3,9,K50,26 -{Key press: alt+ctl+2}- 26=P2,2,K49,26 -{Key press: alt+ctl+1}- 27=P2,1,K51,26 -{Key press: alt+ctl+3}- 28=P2,0,K50,26 -{Key press: alt+ctl+2}- 29=P3,2,K49,26 -{Key press: alt+ctl+1}- R2 is a Honeycomb Alpha Yoke and R3 is TM Airbus Side stick. Ctl+D/H/K/F are hat switch commands to ChasePlane. Alt+1/2/3 from both controllers I use for "toggle view in/out", previous view and next view in ChasePlane. It all works very well and is not hard to program. I hope this helps Brgds Juergen Mader
  11. Hi, In order to make the flight experience more realistic I have (or will have) flight controls for Boeing aircraft (from Honeycomb - Yoke and Throttle Quadrant) as well as Airbus aircraft (from ThrustMaster - Sidestick and Throttle Quadrant). Now the problem arises that ChasePlane only recognizes one control unit to assign buttons to, so at the moment I use a ThrustMaster joystick to control views (inside / outside) and a hatswitch for pan. If I fly a Boeing aircraft I use the joystick/sidestick to control ChasePlane and a Honeycomb Alpha Flight Yoke to control the aircraft. There is a post "2 hat switches in Chase Plane", but no end results. Has anyone solved this problem? Thank you very much for your response Juergen Mader
  12. I found the adjustment: Press Shift+2 (2D panel view) and it's the UP and DOWN ARROW on the radar panel (actually pretty prominent). OR, in the VCP the radar panel with the UP and DOWN ARROW is just above the thrust levers (might have to zoom in)
  13. Hi, Can someone tell me if there is a way to adjust the map range in the A72 500 and if yes "Where is the switch/dial located". There are 2 posts on this topic. the first one just says "he found it" and that's it, the other one refers to the "Shift+2" menu or just above the throttles for the switch/dial location. I can't find it Thanks for help
  14. Hi, Same behavior here. I have attached some screenshots to show the pop up from chaseplane: https://www.flickr.com/photos/141330124@N05/shares/58V054 I had Chaseplane removed from Old Prop and it is installed in Orbx Central. All cameras seem to work fine as well as joystick and keyboard assignment. Thanks for response
  15. Hi, This is my first attempt with FS2Crew and I need some help. As per manual: "Make sure there are FS2Crew entries on it. If not, you forgot to Enable FS2Crew via the FS2Crew NGXu Configurator or you have a write permission issue"; There is NO FS2Crew entry in the panel.cfg file - I have FS2Crew enabled with the configurator (green), also the System Check shows everything OK - also the SEC panel appears with the assigned hot key. I tried a flight and everything seems to be in order. What should the entry look like in the CFG file? Thanks for help
  16. Hi, Thanks Keven for reply. Does anyone use "vJoy" and is interested in shareing what's involved to making it work? Anyone useing a Saitek X52 Professional and a Honeycomb Alpha Flight Yoke and has both working with ChasePlane? Thanks for help
  17. Hi Ernie, It sounds like you have or had a similar situation. Did you contact Keven Menard? Thanks
  18. Hi, Anyone have any suggestions how to solve this issue. At present I have to use the sidestick (for ChasePlane) as well as the yoke (for A/C control).So these items take up a lot of desk space! I have also sent an e-mail to ChasePlane with no reply. Thanks for help / reply
  19. Hi, I received my Honeycomb Alpha Flight Controls / Yoke and I am trying to integrate it with ChasePlane. I have installed a Saitek X52 Professional HOTAS and used the side-stick POV for (P0 - tilt up, P180 - tilt down, P270 - pan left & P90 - pan right); the B5 button for (Toggle IN/Out Camera) and the buttons B22 / B20 button for (Previous Preset / Next/Preset). Is there a way to save this assignment/profile for flying with the side-stick (Airbus) and loading a different assignment/profile for the Alpha Yoke when I fly a Boeing aircraft. Thanks for answer and help
  20. Kyle, Is there a description of the rainmaker function somewhere, where I can read up on it? Thanks for answer
  21. Hi Oliver, I will certainly take a look at the Lorby_Si documentation and try the tool myself and thank you for the many helpful tips. I actually performed some of these futile add_ons already (FlyTampa Tampa and Las Vegas, Aerosoft Mega Airport EDDF and EGLL as well as Airport LSZH and EDDN). However, I will see what happens when updates are available; btw these airports are all made for P3Dv4. And itsjase, I will correct my misspelled DUBAI airport. Thanks
  22. Hi, How are the "Rainmaker" and the "Cockpit Shake" enabled/disabled in the aircraft?
×
×
  • Create New...