GeoSkyman

When I start vpilot a warning pop up saying, Unhandled exception has occurred in your application. if I click continue the application will ignore the error and attempts to continue if I click Quit the app will close please anyone for advise?

Note: Hello All!! After a 26 hours non stop, Flight simulator came back to the normal state with the new RTX 3070 Ti graphics card. Everything is more than normal and performs great. Clean win 10 Installation and optimization Clean MSFS 2020 Installation.

Thank you for the suggestion, too late, fresh windows have been installed and optimized and now 153 GB Of Flight simulator are downloading with no issues so far.

Yes I did every possible way. No solution

Hello All!! Thank you very much for your suggestions, I tried every possible way to solv this problem but still the warning, Your computer does not meet the minimum requirements ……… still pops up every time I load the simulator. Unfortunately nothing more to do other than proceed to a clean windows and Microsoft flight simulator installation. Thank you so much

Hello, yes it shows as it has to be, NVIDIA GeForce RTX 3070 Ti

I understand but 1080 ti Was for me something not to compare of what I get so far from this RTX

Not acceptable in my opinion settings at Ulta and have 24-26 FPS stuttering and laggy. At high 34-36 FPS still laggy and stuttering. Never experienced this situation with the GTX 1080ti. I thought at list a gain of 7-10 FPS MORE WITH THE RTX 3070ti

Its NVIDIA GeForce RTX 3070 Ti

--------------- Display Devices --------------- Card name: NVIDIA GeForce RTX 3070 Ti Manufacturer: NVIDIA Chip type: NVIDIA GeForce RTX 3070 Ti DAC type: Integrated RAMDAC Device Type: Full Device (POST) Device Key: Enum\PCI\VEN_10DE&DEV_2482&SUBSYS_146A10DE&REV_A1 Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER] Device Problem Code: No Problem Driver Problem Code: Unknown Display Memory: 24395 MB Dedicated Memory: 8041 MB Shared Memory: 16354 MB Current Mode: 3840 x 2160 (32 bit) (60Hz) HDR Support: Not Supported Display Topology: Extend Display Color Space: DXGI_COLOR_SPACE_RGB_FULL_G22_NONE_P709 Color Primaries: Red(0.640625,0.330078), Green(0.300781,0.600586), Blue(0.150391,0.060547), White Point(0.280273,0.290039) Display Luminance: Min Luminance = 0.500000, Max Luminance = 270.000000, MaxFullFrameLuminance = 270.000000 Monitor Name: Generic PnP Monitor Monitor Model: SAMSUNG Monitor Id: SAM0D42 Native Mode: 3840 x 2160(p) (30.000Hz) Output Type: HDMI Monitor Capabilities: HDR Not Supported (Eotf2084Supported ) Display Pixel Format: DISPLAYCONFIG_PIXELFORMAT_32BPP Advanced Color: Not Supported Driver Name: C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_0bc9105c62ca22fb\nvldumdx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_0bc9105c62ca22fb\nvldumdx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_0bc9105c62ca22fb\nvldumdx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_0bc9105c62ca22fb\nvldumdx.dll Driver File Version: 30.00.0014.9729 (English) Driver Version: 30.0.14.9729 DDI Version: 12 Feature Levels: 12_1,12_0,11_1,11_0,10_1,10_0,9_3,9_2,9_1 Driver Model: WDDM 2.7 Hardware Scheduling: Supported:True Enabled:False Graphics Preemption: Pixel Compute Preemption: Dispatch Miracast: Not Supported Detachable GPU: No Hybrid Graphics GPU: Not Supported Power P-states: Not Supported Virtualization: Paravirtualization Block List: No Blocks Catalog Attributes: Universal:False Declarative:True Driver Attributes: Final Retail Driver Date/Size: 12/15/2021 02:00:00, 1057344 bytes WHQL Logo'd: Yes WHQL Date Stamp: Unknown Device Identifier: {D7B71E3E-67C2-11CF-6F55-64340EC2D335} Vendor ID: 0x10DE Device ID: 0x2482 SubSys ID: 0x146A10DE Revision ID: 0x00A1 Driver Strong Name: oem5.inf:0f066de31a145f91:Section072:30.0.14.9729:pci\ven_10de&dev_2482 Rank Of Driver: 00CF2001

We have done stress tests, benchmarks the GPU gives its maximum with no OC, but still the sim gives the warning every time it’s starting. I think the last chance is to make a fresh installation on both windows 10 and MSFS 2020

Hello and thank you so much for taking the time to give advise. I still get the warning every time I run the sim anyway. We have done two times clean install of the drivers and I will now see how the sim performs. I think the only thing is left is to for make a clean Windows 10 installation and fresh simulator too. So sad I lost the GTX 1080ti I never intended to change it but the worst happened. Anyway this RTX 3070ti supposed to be better. Honestly I’m not sure 😞

Before I had the GTX1080ti, was very happy, perfect performance. Now I don’t know but so far this RTX 3070ti I can say no comparison with the previous. Maybe I’m wrong but that’s what I see so far. I did not perform anything, just uninstalled the old drivers and installed the new ones. George

Hello, just today due to a GPU technical issue had to buy a new GPU graphics card. I get the RTX 3070ti. Every time I start my simulator now I get a warning msg that Your computer does not meet the minimum requirements. As a result you may experience errors during the game. Anyone please give some advise? Never had this before. Thank you

Anyway thank you for advise, now it’s solved, I restored my pc to a previous restoring point, and now seems everything back in normal

I mean while it’s loading comes accessibility Manager and starts with 1/5 to configure the sim. General settings are reset overall, control settings are on default with no other choice as everything was configured before, and no idea what’s happening. Can not connect to Xbox live, as I understand our settings are saved in Xbox cloud or something. How can log out from the Xbox app

Opening the Xbox Insider Hub getting an Error We're having trouble accessing your account. Please use the Guide to sign out and then back in. What Guide? Don't see any Guide other than Close. Also my Flight Simulator is messed up, settings, controls, Assistants settings ALL MESSED UP with no reason. Had my Last Flight Yesterday with not an issue at all. Any ADVISE Please?

Hope the PMDG keep their promises for a discount for those who purchased their NGXu for P3D

Thank you so much

Hi Guys question please. Modern or Lecacy Model to use in MSFS? Thank you

Everything was normal until the first load in the sim flight plan. As soon as the flight was loaded had the FIRST CTD

100%

Exactly 🙂 that’s what I’m always doing

The most important action before updating the simulator is to empty your community folder, very very critical

For my side I can confirm that it helped a lot , big improvement