I just noticed that the wheels of a particular AI aircraft are not touching the surface when on the ground. All the other AI aircraft at the same airport are fine so I'm assuming it's a config issue with this particular aircraft? Here are the contact points - is this something I should adjust to lower it a little and if so, can someone tell me which ones to change to lower it about 1 or 2 (real world) feet? Thanks[contact_points]static_pitch = -3.360static_cg_height = 7.000tailwheel_lock =0gear_system_type =1max_number_of_points =8point.0= 1, 10.194, 0.000, -6.252, 2000, 0, 0.900, 45.000, 0.250, 2.500, 0.900, 6.000, 9.000, 0point.1= 1, -1.455, -7.624, -6.993, 2500, 1, 1.150, 0.000, 1.000, 1.300, 0.900, 7.000, 10.000, 2point.2= 1, -1.409, 7.624, -6.998, 2500, 2, 1.150, 0.000, 1.000, 1.300, 0.900, 7.000, 10.000, 3point.3= 2, 0.000, -19.777, 0.998, 787, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5point.4= 2, 0.000, 19.777, 0.998, 787, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6point.5= 2, -18.952, 0.000, 0.046, 787, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9point.6= 2, 4.677, 0.000, -3.048, 787, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4point.7= 5, -3.900, 0.000, 0.000, 1600, 0, 0.000, 50.000, 0.000, 0.000, 1.000, 1.000, 1.200, 0

I would recommend letting us know which or what AI aircraft this is. That will give us a better idea of what we are working with and what needs to be done to fix it.Best regards,Mel

Hi Mel.Certainly. It is an OV-10 Bronco that I downloaded from somewhere. Unfortunately I did not keep the readme and there's no authorship information in the .cfg file but I think it's probably a tweaked version of a flyable aircraft by someone who uses the nickname "Piglet?"(Comes with two texture sets - one for an Air Force and the other for a Marine unit based at Danang - both in light grey). It is probably not a true multi-LOD AI model, but it was "tweaked" for AI and works fine except for the floating issue. The wheels look like they are about a foot or two above the ground. I know it's not the scenery elevation as all the other AI aircraft are correct.

The Tim "Piglet" Conrad OV-10a seems to sit fine as an AI here.scott s..

I just noticed that the wheels of a particular AI aircraft are not touching the surface when on the ground. All the other AI aircraft at the same airport are fine so I'm assuming it's a config issue with this particular aircraft? Here are the contact points - is this something I should adjust to lower it a little and if so, can someone tell me which ones to change to lower it about 1 or 2 (real world) feet? Thanks[contact_points]static_pitch = -3.360static_cg_height = 7.000tailwheel_lock =0gear_system_type =1max_number_of_points =8point.0= 1, 10.194, 0.000, -6.252, 2000, 0, 0.900, 45.000, 0.250, 2.500, 0.900, 6.000, 9.000, 0point.1= 1, -1.455, -7.624, -6.993, 2500, 1, 1.150, 0.000, 1.000, 1.300, 0.900, 7.000, 10.000, 2point.2= 1, -1.409, 7.624, -6.998, 2500, 2, 1.150, 0.000, 1.000, 1.300, 0.900, 7.000, 10.000, 3point.3= 2, 0.000, -19.777, 0.998, 787, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5point.4= 2, 0.000, 19.777, 0.998, 787, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6point.5= 2, -18.952, 0.000, 0.046, 787, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9point.6= 2, 4.677, 0.000, -3.048, 787, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4point.7= 5, -3.900, 0.000, 0.000, 1600, 0, 0.000, 50.000, 0.000, 0.000, 1.000, 1.000, 1.200, 0

The numbers I have highlighted are the numbers you will want to change. They are the distance the wheel contact points are below the plane's centerline, in feet. Changing the 6 to 4 will lower the plane 2 feet.regards,Joe

Awesome! Thanks Joe. It turned out my guesstimate of the amount of space between the wheels and the ground was way too much, so I had to play with the numbers for a while, but the problem is now solved.Scott - I had never noticed it before but was taxiing very close to the Bronco when I noticed the daylight under the wheels. It was very small so you are probably right in saying it's fine the way it is. If I hadn't been so close I would not have noticed it and it would never have bothered me! :( Thanks guys!