hugs

[ger 2]

Hi guys , how do i get the runway outlined on the hugs ? I fly a land 3 approach to the runway , fd both on , navigation radios both tuned , hugs in armed 3 , both altimeter settings .Best regards , Gérard

[Chaos81 110]

Make sure you set runway altitude and runway length on the HGS controller.

[Joakim 39]

I't does not show up until you are 300 AGL. I made a tread about the same, but it just seems that i went to the outside view way to fast, after trying.And also. Put in runway specs on the HGS.

[ger 2]

Hi guys , i did set the runway length in the hugs but sisn't set the runway altitude , where can i set this , i didn't know this has to be set also , Thanks in advance , Best regards , Gérard

[dts 0]

There are post on the forum or you could read the manual, either way, use the search button to find your answers

[Cras 6]

fly the tutorial flight, or at least just read it, and you will know how to get started with AIII HUD

[theshack440 22]

Is anyone else's HGS font too large? For me I have to get extremely close to it for it to all be readable.

[Smasher77th 13]

Is anyone else's HGS font too large? For me I have to get extremely close to it for it to all be readable.

Any screenshot? But before I see it, I'll take a guess. I think you're seated too far away from the hugs in the virtual world, as if you backed up your seat, and using a high zoom level. Sometimes it's difficult distinguish between the zoom and your actual position in the cockpit If you have TrackIR, try to look behind you. Are you able to see the headrest of your seat without cutting into it? My guess is that you're probably cutting into the seat. If this is the case, move your position forward until you can see everything in the hugs, when you're able to see every info on the hugs, zoom out gradually until you now have a view similar to the one you had before starting the adjustment. Let me know if that worked. But let me see your screenshot before you start. Here attached is what mine looks like. The zoom is 0.56 CheersChidi