or at these liveries we can't do that?

I only use other liveries for the outside, not the inside, so I simply load (using the PMDG options in the CDU Menu) the options from the House livery. Simple as that. Then I can be sure that everything works as I am used too. If wanted you can, after loading those options, choose (for instance) the MCP that belongs to the livery, si things look as they should but the 'inner workings' of the system will be the default ones.

All options can be chosen for every livery. I think that for you is better to read the tutorial flight, much more than seeing on on youtube.The introduction manual contains all the answer to have or not head up display, fail op or not, collins or honeywell mcp and so on. This for each livery.However, as I told, each NGX is capable of a CAT3 approach and autolanding capability (CAT is for low visibility, the difference between each other is the minimums where you MUST see the runway or a missed approach must be made).So, each one, correctly configured, without failures, is able to show FLARE, but only the fail OP planes will show ROLLOUT.Use the ngx included documents, they are the best way to learn it.

thank you and well do, but am i doing all right if let's say with easyjet 73-7 its showing the retard at 50ft? and what do you mean fail op planes, and if i got it right, not every plane will show the rollout? thanks very much for the help Jeroen,

Read PMDG's introduction document, Your Questions are answered there.

An autoland video with fail passive option (unscripted, not fuly correct, I know, no need to tell me) - just to show it works.

Edited February 4, 201214 yr by Fabo

well i see, thanks, what's fail passive option? where can i select it? thanks

well i see, thanks, what's fail passive option? where can i select it? thanks

What Tim said...

Read PMDG's introduction document, Your Questions are answered there.

Page 59.

Hi DanielTo find the Fail op autopilot (this is the one that provides roll out and on the flight mode annunciation shows LAND 3 in green when engaged) go to the FMS and do the following1. Chose Menu2. Then PMDG Set up3. Aircraft4. Equipment5. Instruements p3/11 at the bottom of this page you will see "AUTOLAND" highlight "FAIL OP" and it will be highlighted in Green. This will now provide LAND 3 and rollout guidance. You will also see an extra button under the Sys button for the lower CDU.

Edited February 4, 201214 yr by Nixon