Sign in to follow this  
guenseli

Flight1 Cessna Mustang (module version 1.0)

Recommended Posts

This module is for the Flight1 Cessna Mustang (module version 1.0)

All credits go to Gregg Seipp!

 

Download Link: F1 Cessna Mustang v1.0

 

Features:

All switches with sound

Covers G100 switches

cold and dark function

 

Download the ZIP and extract it into your modules folder

 

updated:1.0 --> 1.1

added further cold and dark functionality

 

updated:1.1 --> 1.2

This latest module contains functions to control nearly everything of value in the Mustang.  (I didn't place much value on some things like environment controls...don't figure you'll be using it much.)  Some notes:
 
--Where a sound is needeed for each switch, one has been provided.
--The electric trim control on the Mustang is fairly speedy.  I've modelled it as close as I can with the F1Must_Elevator_Trim_Up_Repeat and F1Must_Elevator_Trim_Down_Repeat commands.
--If you use the elevator trim switch on the yoke in the real airplane, the AP is disconnected but the yaw damper is not.  This is modelled in the F1Must_Elevator_Trim_Up_Yoke and F1Must_Elevator_Trim_Down_Yoke commands.
--If you press the yoke AP disconnect button, both the AP and the YD are disconnected in the real airplane.  This is modelled in the F1Must_AP_off_yoke command.
--The knob commands for this aircraft are, primarily for people who's knobs jump around on their VRInsight MCP. If you don't have that problem you can use the basic FSX commands.
--I added a command for the toilet seat as a lark...just for fun.
 
If you have any problems or suggestions, please, drop a note over at the Avsim LINDA support forum!
 
Gregg Seipp
Edited by ScotFlieger
Download link updated

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

In all fairness, I got the original module from somewhere...but I don't know where.  I dug into the details of the aircraft using FSUIPC, asked questions, got some help from others in the community and, using what I learned, added a number of functions to make it more complete.  Did some tweaking and tuning here and there.  There are functions to control practically everything from hardware!

 

Gregg 

Share this post


Link to post
Share on other sites

Hi Gregg

 

There does not seem to be and linda config files in the download its empty and I also receive the below error, do you have this working ok with the mustang, cheers

 

E] LUA.0:  ---> ERROR:: MCP configs not found for current aircraft!

 

LUA Error: ...t Flight Simulator X\modules\linda/system/common.lua:9: attempt to index local 'actions' (a nil value)

 

Regards

Wayne

Share this post


Link to post
Share on other sites

 

 


There does not seem to be and linda config files in the download its empty and I also receive the below error, do you have this working ok with the mustang, cheers

 

 

Maybe I need to send some more stuff to Guenter for the integration to work.  I'll check with Guenter and we'll get it sorted out.

 

Gregg

Share this post


Link to post
Share on other sites

No, there is no config file as I have currently no MCP Combo II

 

You have to make a NEW module and name it "F1 Cessna Mustang"

Share this post


Link to post
Share on other sites

Hello

Not sure how to get this to work with the mcpcombo 2 due to missing config file

Wayne

Share this post


Link to post
Share on other sites

I sent the rest of the files to Guenter today.  Hopefully, we'll get it working for everyone.

Share this post


Link to post
Share on other sites

Is there a way to use this one to make work the Flight1 B200? I see how I can program (for example) the lights, and the sound of the switch is activated, but no function is done. Maybe an easy rename of a function is necesary, but I don't know anything about these scrips (lua ones).

These 2 aircrafts are from the same builder, so maybe they share lots of things.

Share this post


Link to post
Share on other sites

 

 


Is there a way to use this one to make work the Flight1 B200? I see how I can program (for example) the lights, and the sound of the switch is activated, but no function is done. Maybe an easy rename of a function is necesary, but I don't know anything about these scrips (lua ones).

These 2 aircrafts are from the same builder, so maybe they share lots of things.

 

I'd think you may be right.  I don't have the King Air so I can't help on this one.

Share this post


Link to post
Share on other sites

I also do not have the king air, and no, even if you have addons from the same devloper, the LUA variables mustn't match. You really need the addon and gather for the variables, anything else is just guessing.

Share this post


Link to post
Share on other sites

 

 


I see. A shame the developer don't let you have a free B200.



Thanks!

 

That'd be nice. 

Share this post


Link to post
Share on other sites

 

 


I see. A shame the developer don't let you have a free B200. 

 

;) have you asked him??

Share this post


Link to post
Share on other sites

I'd do it if I had one.  I'm finishing changes to the Mustang module for a 1.5 release.  I'm not a King Air fan (the sim may be great...just not much on RW King Air's).  Who would I ask...Jeff?

 

Gregg

Share this post


Link to post
Share on other sites

 

 


Who would I ask...Jeff?

 

I have no clue to be honest, but, yes, probably Jeff ...

If you ask really for me, think that I have only P3D ... oh, the King Air is not P3D ready is that true?

Does anybody know if it's running under P3D v2?

 

Or anybody else is willing to start a LINDA module

Share this post


Link to post
Share on other sites

 

 


I have no clue to be honest, but, yes, probably Jeff ...

If you ask really for me, think that I have only P3D ... oh, the King Air is not P3D ready is that true?

Does anybody know if it's running under P3D v2?



Or anybody else is willing to start a LINDA module

 

I'm actually a little surprised no one's asked about it before...an airplane with this many buttons, knobs and switches.

Share this post


Link to post
Share on other sites

I'm interested in it, in principle.

 

But no P3D and that price is a bit steep for me currently.

Save my money for PMDG stuff  :lol:

Share this post


Link to post
Share on other sites

I'm interested in it, in principle.

 

 

 

But no P3D and that price is a bit steep for me currently.

 

Save my money for PMDG stuff :lol:

 

I saw a post where folks were saying a P3D version is in the works.  Saving my $$ for a biz jet.

Share this post


Link to post
Share on other sites

updated:1.1 --> 1.2


This latest module contains functions to control nearly everything of value in the Mustang.  (I didn't place much value on some things like environment controls...don't figure you'll be using it much.)  Some notes:

 

--Where a sound is needeed for each switch, one has been provided.

--The electric trim control on the Mustang is fairly speedy.  I've modelled it as close as I can with the F1Must_Elevator_Trim_Up_Repeat and F1Must_Elevator_Trim_Down_Repeat commands.

--If you use the elevator trim switch on the yoke in the real airplane, the AP is disconnected but the yaw damper is not.  This is modelled in the F1Must_Elevator_Trim_Up_Yoke and F1Must_Elevator_Trim_Down_Yoke commands.

--If you press the yoke AP disconnect button, both the AP and the YD are disconnected in the real airplane.  This is modelled in the F1Must_AP_off_yoke command.

--The knob commands for this aircraft are, primarily for people who's knobs jump around on their VRInsight MCP. If you don't have that problem you can use the basic FSX commands.

--I added a command for the toilet seat as a lark...just for fun.

 

If you have any problems or suggestions, please, drop a note over at the Avsim LINDA support forum!

 

Gregg Seipp

Share this post


Link to post
Share on other sites

guenseli, I borrowed a few ideas from your version 1.2 file and shayowl2's B200 and i would like to add something in return. I am working on my F1 B200 Lua scripts and created something that you may, or may not, be able to use in your next release.

 

her is the fix I created to toggle the generator switches without turning on the alternator if the engine is not running. Thanks for your work and I hope it helps.

 

Just change the B200 Lvar commands with those of the mustang. The BShift is not needed. I am using the 0 button on my Saitek yoke to get 2 functions on each button. Create a second for the right generator.

 

 

 

function B200_Left_Generator_On_Off ()

    if BShift == 0 then
    
        GenLOn = ipc.readLvar("B200CLGen")            -- Right Altenator needs to be off
        
            ipc.writeLvar("B200LEFTGEN",1)
            ipc.control (65823, 1) -- knob sound
            ipc.control (65823, 0) -- knob sound
            ipc.sleep(600)
            ipc.writeLvar("B200LEFTGEN",2)
            ipc.control (65823, 1) -- knob sound
            ipc.control (65823, 0) -- knob sound
            ipc.sleep(600)
            ipc.writeLvar("B200LEFTGEN",1)
            ipc.control (65823, 1) -- knob sound
            ipc.control (65823, 0) -- knob sound
            ipc.sleep(100)
            EngLOn = ipc.readUB(0x0894,0)            -- Returns a 1 when Left engine is running
            
            if GenLOn == 1 and EngLOn == 1 then
                ipc.control(66363)
            end
        
    else
        
        GenLOn = ipc.readLvar("B200CLGen")
        
            ipc.writeLvar("B200LEFTGEN",0)
            ipc.control (65823, 1) -- knob sound
            ipc.control (65823, 0) -- knob sound
            ipc.sleep(100)
            EngLOn = ipc.readUB(0x0894,0)
            
                if GenLOn == 0 and EngLOn == 1 then       
                    ipc.control(66363)
                end
    end
end

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this