rafaelesp

Voice not working

Recommended Posts

Hi all,

 

First of all, sorry for my bad english.

 

I bought Fs2crew reboot 1.1 four days ago, but I can't get the voice version working.

The installation went well and no SDK problems at all, but the voice function is not working. I have no green bar in Pd3 V3.

When I open the Fs2crew control, it shows in a green bar "FS2crew voice recognition activated" but then green bar never shows again.

I have bought a new headset USB but the this didn't fix the problem, so I have installed a fresh Windows 10 Pro (English US), and then P3d V3, PMDG 737 for that version and Fs2crew 1.1  again, and the situation is the same as in my previous installation

I run the 737 in the default situación (no saved situacion at all).

The speech recognition in windows and in google chrome works perfectly.

I tried with another headset, this time conected to the sound card (integrated) and the problem persist.

 

Another issue: when I close P3d with PMDG + Fs2crew, then system hang (P3d is not responding). This issue don't happen with any other aircraft. If I uninstall FS2crew P3d close without any problems, so Fs2crew might be the razon for the hang.

 

May I have your help?

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

No. A logitech H340 usb headset, and before a logitech headset non usb, conected to the sound card.

Thanks Bryan for your support.

Share this post


Link to post
Share on other sites

Can you run the voice training?

 

Are you sure your microphone is not 'muted'?

Share this post


Link to post
Share on other sites

Yes. I have run the voice training and i am sure the mic is not mutted. The speech recognition in windows works very well, and the same in google chrome voice.

Thanks again. I am totaly lost

Share this post


Link to post
Share on other sites

Yes. I have run the voice training and i am sure the mic is not mutted. The speech recognition in windows works very well, and the same in google chrome voice.

Thanks again. I am totaly lost

 

Try this... I found this via Google:

 

Click Start - Control Panel - Ease Of Access - Speech Recognition - Advanced Speech Options - Advanced - Select "Use This Audio Input Device" - Then Select Your Microphone and press OK and apply.

 

After that the speech recognition would pick up my voice but still wasn't working until I restarted my computer. So you may have to too.

Share this post


Link to post
Share on other sites

Hi, Bryan.

That was already set as you stated.

I do not know other things to do. I tried everything. Windows speech, chrome voice, skype, voice recorderand other voice apps work perfectly, but no my fs2crew reboot. I will use the button versión. It is not as cool as the voice versión, but it works well. I will continue searching to figure out what is the problem. By the way, will the legacy versión work in p3dv3?. Just to try something more.

Thanks again, Bryan.

 

Greetings from Madrid,Spain

Share this post


Link to post
Share on other sites

Hi Rafael,

 

The Legacy version is not supported in P3D V3.

 

As for your issue, if Voice is activating without any errors, and you said it is, then everything should work.

 

Have you used FS2Crew voice before?

Share this post


Link to post
Share on other sites

Yes, Byan, but in my previous rig. I used the fs2crew for iFLy 737 in FS2004 without any problems, but I have not tried any other Fs2crew products in my very new high end  system.

Share this post


Link to post
Share on other sites

Each FS2Crew Voice control uses the same underlying system.

 

Your results will be consistent.

 

However, there's something evidently on your new very high end system that isn't playing well it.  You'll need to experiment a bit.  Triple check your audio settings.  It's probably just a matter of some setting not being set right.

Share this post


Link to post
Share on other sites

Thanks again, Bryan.

I think I have tried everything but obviously there is something not right, perhaps in my settings. What makes me totally lost is that  every other things about voice are working well, as I said before, but no the Fs2crew. I will try everything again and I'll report the results. I wish I have it working.

Again, thank you so much for your support. Good work.

Share this post


Link to post
Share on other sites

Very good news, Bryan!

At least, I have my Fs2crew working.

As I said before, I tried everying without any results: Reinstalled the PMDG 737, reinstalled the Fs2crew, reinstalled a fresh copy of Win 10, reinstalled de sound drivers, without any success.

Obviously my system had a very strange problem with sound.

And after lots of work, I found the problem: The Realtek HD sound drivers came with my motherboard, Asus Maximus VIII Hero.

I reinstalled many times the drivers provided with the motherboard with no results at all, so finally, I uninstalled the sound drivers and left Windows 10 install its own drivers (HD Sound Drivers), and now everything in Fs2crew is working as it should be. I have made a successfull flight and all went OK.

I don't know what is the issue with the Realtek sound drivers provided by Asus, but it seem imcompatible whit Fs2crew, although is working with windows speech recognition.

Thank you so much, Bryan, for your support and for bring us such a very good software,

 

Greetings from Madrid, Spain.

 

Rafael Povedano

Share this post


Link to post
Share on other sites

Glad you got it sorted!

 

A lot of our users use Asus and the RealTek sound drivers with no issues.

 

But so long as you got it working, that's all that counts.

 

Cheers,

Share this post


Link to post
Share on other sites

Hi rafaelesp,

 

I am having the same problem in fsx, uninstalled, re-installed-still not working.

 

See my post in welcome new members (not hearing voices)

 

Kind Regards

Bill MacLeod

Share this post


Link to post
Share on other sites

I had a headache with Speech Recognition on my new rig, but I found that if You select separate jacks input and You close completely Nahimic - IT WORKS :D

So Nahimic sound enhancer is causing some troubles in VOX and FS2Crew etc....

Share this post


Link to post
Share on other sites
That's correct:

 

Solution:

 

exit Nahimic via Tray - start the Simulator - open FS2Crew main panel - start Nahimic 2

Share this post


Link to post
Share on other sites

Hi,

I bought a view days ago 737ngx reboot version 3.1. Unfortunatelly it is working only in button mode. I used so far legacy version and everything was ok. I have read all faq's regarding this problem and already look through this forum. Speech recognition is working. All settings checked and verified. But still no joy on voice mode. How to swich to voice mode? Is it automatic or not?

 

Regards

Romek

Share this post


Link to post
Share on other sites

Hello,

Have you gone to the Config - Setup page?

You need to select either SOP1 or SOP3 then activate the voice control.
Cf. NGX REBOOT MAIN OPS MANUAL page 42

Share this post


Link to post
Share on other sites

I think there should be a part added in the manual telling people to uninstall Realtek hd audio driver, it made Fs2crew not work in voice for me too.

Share this post


Link to post
Share on other sites

I think it's in the FAQs... you want to use the drivers that Microsoft use...

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now