Hi,

 

I have clean installation of Windows 10 and clean installation of FSX Steam Edition (I didn't install "old" FSX before Steam Edition on this clean system).

I opened I opened simulator several times and three times had error like this:

 

 

One time just after start up (on splash screen), here are details:

 

fsx.exe
10.0.62615.0
559f9a9a
KERNEL32.DLL
10.0.10586.0
5632d9fd
c0000005
27616
1ab4
01d12a18a74a5f51
F:\Steam\steamapps\common\FSX\fsx.exe
C:\WINDOWS\SYSTEM32\KERNEL32.DLL
95d0b977-45f9-4dc2-83f2-5e9485f1652d

 

Two times, just after pressing "exit simulator". Detail are:

 

fsx.exe
10.0.62615.0
559f9a9a
MSVCR80.dll
8.0.50727.9193
560489c4
c000000d
00008aa0
1904
01d12adb19944c58
F:\Steam\steamapps\common\FSX\fsx.exe
C:\WINDOWS\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.9193_none_d09188224426efcd\MSVCR80.dll
0dc40903-7996-41d3-9429-ac46df251b83

 

Since today I installed FSUIPC, DX10Fixer, FreeMeshX, ORBX Global and ORBX Vector, but one of these errors appeared even before installing above addons.

 

My CFG file:

 

 

[GRAPHICS]
SHADER_CACHE_PRIMED_10=1693751040
SHADER_CACHE_PRIMED=1693751040
D3D10=1
TEXTURE_MAX_LOAD=1024
NUM_LIGHTS=8
AIRCRAFT_SHADOWS=0
AIRCRAFT_REFLECTIONS=1
COCKPIT_HIGH_LOD=1
LANDING_LIGHTS=1
AC_SELF_SHADOW=1
EFFECTS_QUALITY=2
GROUND_SHADOWS=0
TEXTURE_QUALITY=3
IMAGE_QUALITY=0
See_Self=1
Text_Scroll=1
MultiSamplesPerPixel=4
MultiSampleQuality=0

[sOUND]
AmbientUIMusicVolume=-6.000000
PrimaryDevice={DEF00000-9C6D-47ED-AAF1-4DDA8F2B5C03}
VoiceDevice={DEF00002-9C6D-47ED-AAF1-4DDA8F2B5C03}
SOUND=1
SOUND_QUALITY=2
SOUND_LOD=1
UISound=0
AmbientUI=0
SOUND_FADER1=0.900000
SOUND_FADER2=0.800000
SOUND_FADER3=1.000000
SOUND_FADER4=0.000000
AmbientUIMusic=FSX01

[Display]
ChangeTime=4.000000
TransitionTime=4.000000
ActiveWindowTitleTextColor=255,255,255
ActiveWindowTitleBackGroundColor=0,28,140,64
NonActiveWindowTitleTextColor=255,255,255
NonActiveWindowTitleBackGroundColor=24,33,87,64
InfoUpperRightTextColor=255,0,0
InfoUpperRightBackGroundColor=0,0,0,0
InfoLowerLeftTextColor=255,255,255
InfoLowerLeftBackGroundColor=255,0,0,128
InfoLowerRightTextColor=255,255,255
InfoLowerRightBackGroundColor=255,0,0,128
InfoBrakesEnable=True
InfoParkingBrakesEnable=True
InfoPauseEnable=True
InfoSlewEnable=True
InfoStallEnable=True
InfoOverspeedEnable=True
BLOOM_EFFECTS=1
SKINNED_ANIMATIONS=1
TEXTURE_BANDWIDTH_MULT=160
UPPER_FRAMERATE_LIMIT=0
WideViewAspect=False
ForceVCShadowMap=1

[Main]
User Objects=Airplane, Helicopter
SimObjectPaths.0=SimObjects\Airplanes
SimObjectPaths.1=SimObjects\Rotorcraft
SimObjectPaths.2=SimObjects\GroundVehicles
SimObjectPaths.3=SimObjects\Boats
SimObjectPaths.4=SimObjects\Animals
SimObjectPaths.5=SimObjects\Misc
ProcSpeed=17823
PerfBucket=7
HideMenuNormal=0
HideMenuFullscreen=1
Location=120,101,1160,880,\\.\DISPLAY1
Maximized=2

[PANELS]
IMAGE_QUALITY=1
QUICKTIPS=1
PANEL_OPACITY=100
PANEL_MASKING=1
PANEL_STRETCHING=1
UNITS_OF_MEASURE=0
DEFAULT_VIEW=0

[Weather]
WindshieldPrecipitationEffects=1
MinGustTime=10
MaxGustTime=500
MinGustRampSpeed=1
MaxGustRampSpeed=200
MinVarTime=5
MaxVarTime=50
MinVarRampSpeed=10
MaxVarRampSpeed=75
TurbulenceScale=1.000000
WeatherServerAddress=fs2k.zone.com
WeatherServerPort=80
WeatherGraphDataInDialog=0
AdjustForMagVarInDialog=1
DynamicWeather=0
DownloadWindsAloft=0
DisableTurbulence=0
CLOUD_DRAW_DISTANCE=5
DETAILED_CLOUDS=1
CLOUD_COVERAGE_DENSITY=8
THERMAL_VISUALS=0

[AccelerationPack]
ControlsFirstRun=0
HomePageFirstRun=0

[CONTROLS]
Controls_Default=Standard
Controls_Current=Standard
KBDAIL=64
KBDELEV=64
KBDRUD=64
[TextInfo.1]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
WindDirectionAndSpeed=1,6
[TextInfo.2]
FrameRate=1,1
LockedFrameRate=1,2
GForce=1,3
FuelPercentage=1,4
[TextInfo.3]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
WindDirectionAndSpeed=1,6
FrameRate=2,1
LockedFrameRate=2,2
GForce=2,3
FuelPercentage=2,4
[slewTextInfo.1]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
[slewTextInfo.2]
FrameRate=1,1
LockedFrameRate=1,2
[slewTextInfo.3]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
FrameRate=2,1
LockedFrameRate=2,2
[DynamicHeadMovement]
LonAccelOnHeadLon=-0.020000
LonAccelOnHeadPitch=-0.010000
RollAccelOnHeadLat=0.010000
YawAccelOnHeadLat=-0.100000
RollAccelOnHeadRoll=0.100000
MaxHeadAngle=5.000000
MaxHeadOffset=0.300000
HeadMoveTimeConstant=1.000000
[VirtualCopilot]
VirtualCopilotActive=0
[uSERINTERFACE]
PageID=1
OpenATCOnCreate=0
SHOW_MISSION_CAPTIONS=0
PAUSE_ON_LOST_FOCUS=0
PROMPT_ON_EXIT=1
SITUATION=FLIGHTS\OTHER\FLTSIM
Map_Orientation=2
ShowAllACPaintSchemes=1
SelectAircraftManufacturer=All
SelectAircraftPublisher=All
SelectAircraftType=All
[ATC]
ShowATCText=0
COMM_MSG_NONE_COLOR=FFFFFFFF
COMM_MSG_ATC_USER_COLOR=FFB6FFB6
COMM_MSG_USER_ATC_COLOR=FFFFD21B
COMM_MSG_ATC_AI_COLOR=FF00FF00
COMM_MSG_AI_ATC_COLOR=FFFF7840
AutoOpenAirTrafficWindow=0
UsePilotVoice=1
PilotVoice=0
[PointOfInterestSystem]
CycleSetting=0

[sCENERY]
LENSFLARE=0
DAWN_DUSK_SMOOTHING=1
IMAGE_COMPLEXITY=4
ShowMissingTextureAlert=0

[TrafficManager]
AirlineDensity=0
GADensity=0
FreewayDensity=0
ShipsAndFerriesDensity=5
LeisureBoatsDensity=5
IFROnly=0
AIRPORT_SCENERY_DENSITY=1

[TERRAIN]
LOD_RADIUS=5.000000
MESH_COMPLEXITY=75
MESH_RESOLUTION=25
TEXTURE_RESOLUTION=26
AUTOGEN_DENSITY=3
DETAIL_TEXTURE=1
WATER_EFFECTS=4

[AContain]
ShowLabels=1
ShowUserLabel=0
ShowLabelManufacturer=0
ShowLabelModel=1
ShowLabelTailNumber=1
ShowLabelDistance=0
ShowLabelAltitude=0
ShowLabelAirline=0
ShowLabelAirlineAndFlightNumber=0
ShowLabelFlightPlan=0
ShowLabelContainerId=0
ShowLabelAirspeed=0
ShowLabelHeading=0
LabelDelay=1000
LabelColor=FFFF0000

[iNTERNATIONAL]
ASLAT=2
ASLON=0
MEASURE=0
[REALISM]
PFactor=1.000000
Torque=1.000000
GyroEffect=1.000000
CrashTolerance=1.000000
General=1.000000
UnlimitedFuel=False
AllowEngineDamage=False
TrueAirspeed=False
AutoCoord=False
RealMixture=True
StressDamage=False
GEffect=True
ManualLights=True
GyroDrift=True
CrashWithDyn=False
CrashDetection=False
AutoTrim=False
[sIM]
SYSCLOCK=1
[sTARTUP]
DEMO=0
SHOW_OPENING_SCREEN=1
STARTUP_DEMO=
LoadWindow=1
[FACILITIES]
COUNTRY=
STATE=
CITY=
GTL_BUTTON=1466
[Misc]
Com_Rate=7

[Trusted]
Modules\FSUIPC4.dll.ktrctqhcooztnecruewreizaobaikhwnoallcohr=1

[DISPLAY.Device.NVIDIA GeForce GTX 660 Ti.0.0]
AntiAlias=1
Mode=1280x1024x32
TriLinear=0
Anisotropic=1

[MULTIPLAYER]
condAccoutPassword=0
VoiceVolume=0.000000

 

 

nVidia driver: 359.00

 

What can I do to resolve it?

 

Lucas

 

 

Edit:

 

Next error... this time, after installing PMDG NGX. I loaded FSXSE, then free flight to check if it works, exit the flight...and error. I checked in "Events Viewer":

 

fsx.exe
10.0.62615.0
559f9a9a
PMDG_737NGX.dll
1.0.0.0
55119308
c0000005
256663
19fc
01d12af029ddbf68
F:\Steam\steamapps\common\FSX\fsx.exe
F:\Steam\steamapps\common\FSX\gauges\PMDG_737NGX.dll
a0cee6e4-a7a9-49f4-b7d0-9f195565a9f3

 

What is going on? :(

According to the AVSIM CTD Guide (see link in my signature):

 

Kernel32.dll - The kernel32.dll belongs to system memory management so consider it like an out-of-memory (OOM) crash.  Reduce your settings.

 

 

MSVCR80.dll, MSVCR90.dll, or MSVCR100 – belongs to Microsoft Visual Redistributable C++ 2005, 2008, 2010 respectfully. 

• Run the Microsoft.net Repair Tool – Whenever you get a Microsoft.net error or Microsoft Visual C++ error (faulting module), run the Microsoft.net repair tool.
• Uninstall FSX SP2 if installed, uninstall it via the Windows Add/Remove program (it will not remove FSX, just SP2).  Restart your system.  Reinstall FSX SP2.  Restart your system. 
• Uninstall FSX Acceleration if installed, do the same procedure as for SP2 except remove Acceleration, Restart, install Acceleration, Restart.  These actions will not remove your configuration files like FSX.cfg, scenery.cfg, dll.xml, exe.xml but if you want to be safe, back them up first.
• If the above does not work, uninstall Microsoft Visual 2005, 2008, or 2010, as appropriate in your Add/Remove Programs.  Go to the website (see section above regarding Microsoft Visuals), download and reinstall.

 

PMDG_737NGX.dll –

• Check throttle or controller connected to your computer.  Make sure you are using the drivers that came with the device. Might be a conflict using FSUIPC utility control features for your controller.

Best regards,

Hi Jim,

 

thanks for your reply.

 

Ad. Kernell32.dll

It's strange. I have nearly the same configuration as I had before reinstall system and simulator. I only don't have entries UsePools=0 and AffinityMask=14. Also TEXTURE_BANDWITCH_MULT now is =160 (this is default FSX:SE preset), earlier I had = 40. However, I don't know if should I change anything in CFG file in FSX:SE version :/

 

By the way - does the HIGHMEMFIX should be in CFG file or not? In the Internet there are different opinions... Personally I don't have it in CFG file (I mean: this fix was not present in CFG in original FSX.CFG file in Steam version).

 

Ehh, It had to be much more better with FSX:SE, but I have more errors now then on Vista and boxed FSX

 

Ad. MSVCR80.dll

Ok, I'll try install all versions of Visual C++.

 

Ad. PMDG_737NGX.dll

I have Saitek X52. On Saitek page there are drivers for Windows 10. I dowloaded them a few days ago, so I assume that they are actually. However, there is a note they are beta, but the only issue I observed that every LED and MFD on joystick flashes many times when system is starting, but in simulator, everything works fine.

 

I have registered FSUIPC but didn't use it to configure controller.

 

In other posts there is suspicion that UIAutomationCore.dll file can cause the problem... maybe should I delete it or paste older version of this file?

 

Regards,

Lucas

Hi Jim,

 

thanks for your reply.

 

Ad. Kernell32.dll

It's strange. I have nearly the same configuration as I had before reinstall system and simulator. I only don't have entries UsePools=0 and AffinityMask=14. Also TEXTURE_BANDWITCH_MULT now is =160 (this is default FSX:SE preset), earlier I had = 40. However, I don't know if should I change anything in CFG file in FSX:SE version :/

 

More issues are fixed when one rebuilds the fsx.cfg.  This means there was a bad tweak and/or too high settings.  I understand the default Texture_Bandwidth_Multi is 160 and I would not change that.  If you go to the default fsx.cfg settings, see if the problem(s) go away.  If so, be careful in the future if you try to add a tweak or change a setting.

 

By the way - does the HIGHMEMFIX should be in CFG file or not? In the Internet there are different opinions... Personally I don't have it in CFG file (I mean: this fix was not present in CFG in original FSX.CFG file in Steam version).

 

I heard this "fix" is no longer needed in FSX-SE configurations as the fix was made in the FSX.exe.

 

Ehh, It had to be much more better with FSX:SE, but I have more errors now then on Vista and boxed FSX

 

Ad. MSVCR80.dll

Ok, I'll try install all versions of Visual C++.

 

It is my understanding that FSX-SE used Microsoft Visual 2010 for installation of their program.  FSX used Microsoft Visual 2005 w/SP1.  Some FSX addons use Microsoft Visual 2008 w/SP1.  MSVCR80.dll belongs to the Microsoft Visual 2005 w/SP1 package.  I know that FSX will not start up if you remove Microsoft Visual 2005 even if you have 2008, 2010, or 2012 installed.  You have an updated version of Microsoft Visual 2005 (8.0.50727.9193).  Normally, Microsoft Visual 2005 w/SP1 is v8.0.50727.6195.  Windows Updates or Windows 10 updated it probably to 9193.  I cannot find your version on the Internet.  I do not know why you have Microsoft Visual 2005 installed on your system.  Perhaps you have FSX installed too?  Perhaps you are using something that come with FSX and installed it in FSX-SE?

 

Ad. PMDG_737NGX.dll

I have Saitek X52. On Saitek page there are drivers for Windows 10. I dowloaded them a few days ago, so I assume that they are actually. However, there is a note they are beta, but the only issue I observed that every LED and MFD on joystick flashes many times when system is starting, but in simulator, everything works fine.

 

I have registered FSUIPC but didn't use it to configure controller.

 

The solution to the PMDG_737NGX crash comes from searching the Internet and the only solution I know about right now.  If it continues, you will need to go to the main PMDG website, logon and submit a trouble ticket.

 

In other posts there is suspicion that UIAutomationCore.dll file can cause the problem... maybe should I delete it or paste older version of this file?

 

The uiautomationcore.dll in your main FSX-SE folder was installed by DTG.  It comes with the product so do not remove it as they must figure it is the only one that works with FSX-SE.

 

Regards,

Lucas

See my comments in RED in the quote above. 

 

Best regards,

I do not know why you have Microsoft Visual 2005 installed on your system.  Perhaps you have FSX installed too?  Perhaps you are using something that come with FSX and installed it in FSX-SE?

No. I did clean installation FSX:SE on fresh Windows 10. I installed PMDG NGX - perhaps this addon install C++ 2005

 

My C++ installations are:

 

No. I did clean installation FSX:SE on fresh Windows 10. I installed PMDG NGX - perhaps this addon install C++ 2005

 

My C++ installations are:

 

You have the correct versions of Microsoft Visual 2005 installed.  You say it only shows this error when you shutdown FSX-SE so I would not worry about it.  Eventually it will go away as all crash errors do as you change things in your configurations including your system BIOS settings.  PMDG NGX uses Microsoft Visual 2010.

 

There is no "magic bullet" to fix your crashes.  If the solutions provided did not work, then you have to conduct an investigation.  To conduct an investigation you have to move your fsx.cfg, scenery.cfg, and dll.xml to a temporary folder.  The fsx.cfg and scenery.cfg will be rebuilt to the default.  The dll.xml is not a default file so it will not be rebuilt but it will tell you if there is something in this file that is causing your crashes.  You won't be able to use the NGX unless you go into the dll.xml and disable each module as explained on page 3 of the AVSIM CTD Guide.  The fastest way to find out if there's an issue with the dll.xml is to simply move it to a temporary folder.  It is not needed to run FSX-SE (but needed to run the modules shown inside the file). 

 

Once you move the dll.xml, fsx.cfg, and scenery.cfg, you are back to the FSX-SE default configuration.  It's easier doing this than reinstalling FSX-SE.  If you still have errors, then there is probably something wrong with your computer system or you installed FSX-SE with UAC and any anti-virus program running (this should never be done).  You must also make sure you are running FSX-SE as the administrator for ALL USERS.  If not, then you will have problems.  There is so much security in Windows 10 and Windows 7 as Microsoft wants to protect you from evil people who might hack your system.  Now, you have to eliminate that security for FSX-SE and all of the addons or else you will have problems.

 

Hope this helps.

 

Best regards,

...to be sure, I also installed VC 2008 both x64 and x86.

 

 

 

...and any anti-virus program running (this should never be done)

Yes, I read about it, so I added exception in my AVG.

 

 

 

You must also make sure you are running FSX-SE as the administrator for ALL USERS

I know about it, but I'm not sure if I run FSX as administrator. From the shortcut, which have been created while installing FSX:SE, I can't run as administrator, because when i click on it right mouse button there is no option "Run as Administrator".

 

Jim, your posts are very helpfully. Thank you very much.

 

With regards,

Lucas

I know about it, but I'm not sure if I run FSX as administrator. From the shortcut, which have been created while installing FSX:SE, I can't run as administrator

 

 

Try this.  Right Click on FSX in your Steam library and click on Properties. Click Local files  Click  Browse Local Files.  This will bring you to your FSX install location.  Right click on the .exe  go into properties, then into Compatibility and tick the box Run as administrator,  hit ok  

There is so much security in Windows 10 and Windows 7 as Microsoft wants to protect you from evil people who might hack your system.  Now, you have to eliminate that security for FSX-SE and all of the addons or else you will have problems.

 

That's a bad idea - part of the security in new versions of Windows is that you keep UAC on and don't run everything as Admin.

 

I can keep UAC on, and run FSX without admin rights quite nicely and very stably. FSX-SE installs outside of Windows' Program Files folders so there shouldn't be any need to run it as admin or turn off UAC.

 

Any FS add-on that cannot run without Admin rights or with UAC is by definition broken. We've only had this security model for what, a decade?

 

Cheers!

 

Luke

Thanks, Poppet.

I was so frustrated with this happening to me so I had to make an account just to post my successful fix. What I had to do was go to compatibility on the FSX eve and run the compatibility troubleshoot and then launch.