November 14, 20169 yr Hello, The problem is that, the FO dissarms de Autobrake right when i land(or activate reverse thrust), so i got to stop the plane using manual braking. Ive been browsing around, no luck this time. Hope its an easy fix. Thanks in advance Raphael Chacón FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481 PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381 #397556
November 14, 20169 yr Make sure your throttles are both all the way back in idle at touchdown. If either one is out of idle the autobrakes will disarm immediately after touchdown. Check your calibration if it still happens when you're SURE you had them at idle when you touched down. Regards Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
November 14, 20169 yr Author Thanks, Flying right now, will calibrate and test it when arriving.... Raphael Chacón FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481 PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381 #397556
November 15, 20169 yr Commercial Member Did that help? B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
November 18, 20169 yr Author Hello Bryan, Negative, ive been trying around the calibration these days, but my autobrake is still being dissarmed. I noticed that the FS2CREW NGX First Officer actually says "Autobrake Dissarmed" when that happens under normal flight conditions. Of course not happening in other testing evironment when im not using the FS2CREW, so its something pointing calibration? Dont know... No luck yet... I´ve calibrated through FSUIPC(Well just a check out indeed), my controls are not spiking, i cleaned them recently and are like new. Drivers installed come from W10. Actually W10 downloads the exact drivers, but i guess i can try something around installing saitek drivers from their website and see what happens. In any case, i dont have any problem with my controls so far, was kind of plung and play.... Gee.... Well, let me know your thoughts... Raphael Chacón FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481 PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381 #397556
November 18, 20169 yr Author I did some test now and noticed that using autobrake 1 and 2, the system disarms as soon as i activate the reverse thrusts. But is workling normally when using autobrake 3 and max...... Everything is calibrated through FSuipc, except brakes(Rudder), that where re-calibrated through P3D. Apparently not something from FS2CREW indeed. i just..... need a solution, not too mutch usefull threads around.... everything is about calibrating.... but this issue 1-2 no / 3 - max yes, well, is quite weird... Dont understand..... any clue? Raphael Chacón FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481 PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381 #397556
November 18, 20169 yr Author Well, solved! Indeed, my FSUIPC was keeping config for brakes, and my P3D too. I just removed them all..... Not P3D Braking, Not FSUIPC calibration, and works perfectly. Bet i will get to a happy medium around that. Thanks for support... Raphael Chacón FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481 PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381 #397556
November 18, 20169 yr Commercial Member Glad you got it sorted :wink: B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
Archived
This topic is now archived and is closed to further replies.