A basic step-by-step guide to Ortho4XP for Windows.

[Mucker 93]

44 minutes ago, Deadraque said:

even 1 by 1 square has the same problem

Yes whether batch or single tile, whether batch build or manually go through steps same issue.

Can anyone help with this please?

[p71interceptor 0]

On 1/22/2018 at 1:20 PM, Deadraque said:

Hi i always have a problem at step 1. is always stop at  Recycling OSM data for way["natural"="water"]["tidal"!="yes"]

whatever i do. I looked at videos and it continues after that with everyone i have no idea what is? some sometimes i get the DONE and stops there if i press step 2 it says You must first build OSM data !

Tile 1 / 1

Step 1 : Building OSM and patch data for tile +36-121 : 
--------

-> Downloading airport and water/ground boundary data from Openstreetmap :
    Obtaining OSM data for way["aeroway"="aerodrome"]
     Done.
     A total of 141 node(s) and 10 way(s).
       *      Eagle Field
       *      Willett Field
       *      William Robert Johnston Municipal Airport
       *      Coalinga Municipal Airport
       * KMAE Madera Municipal Airport
       * lat=36.0013873 lon=-120.9018370
       *      Firebaugh Airport
       *      Gallisons Dos Palos Airport
       * lat=36.5817330 lon=-120.3530300
       *      Avenal Airport
    Obtaining OSM data for rel["aeroway"="aerodrome"]
     Done.
     A total of 0 node(s) and 0 relation(s).
    Obtaining OSM data for way["aeroway"="heliport"]
     Done.
     A total of 0 node(s) and 0 way(s).
    Recycling OSM data for way["natural"="water"]["tidal"!="yes"]
 

thanks for helping

 

Hi all, Hope everybody is well.

Did you manage to sort this issue out? 

Im having the same issue as you and have done since about January 21st.  Any help on this would be great as i now have half of UK in Ortho4xp and half is default.

 

Thank you in advance 

[Malkite 0]

On 22.1.2018 at 2:20 PM, Deadraque said:

Hi i always have a problem at step 1. is always stop at  Recycling OSM data for way["natural"="water"]["tidal"!="yes"]

whatever i do. I looked at videos and it continues after that with everyone i have no idea what is? some sometimes i get the DONE and stops there if i press step 2 it says You must first build OSM data !

Tile 1 / 1

Step 1 : Building OSM and patch data for tile +36-121 : 
--------

-> Downloading airport and water/ground boundary data from Openstreetmap :
    Obtaining OSM data for way["aeroway"="aerodrome"]
     Done.
     A total of 141 node(s) and 10 way(s).
       *      Eagle Field
       *      Willett Field
       *      William Robert Johnston Municipal Airport
       *      Coalinga Municipal Airport
       * KMAE Madera Municipal Airport
       * lat=36.0013873 lon=-120.9018370
       *      Firebaugh Airport
       *      Gallisons Dos Palos Airport
       * lat=36.5817330 lon=-120.3530300
       *      Avenal Airport
    Obtaining OSM data for rel["aeroway"="aerodrome"]
     Done.
     A total of 0 node(s) and 0 relation(s).
    Obtaining OSM data for way["aeroway"="heliport"]
     Done.
     A total of 0 node(s) and 0 way(s).
    Recycling OSM data for way["natural"="water"]["tidal"!="yes"]
 

thanks for helping

 

Hey all! I´m so glad, that I´m not alone. Same problem here. Last week, Ortho4XP was still working.

[Malkite 0]

I don´t want to wait for Version 1.30 :(

[RonF 2]

Hi

    I recently had to reinstall windows 10 along with ALL my p3d&x plane stuff . I also reinstalled ortho4xp 120b along with hd global sceneryv4. So far everything is going well with an occasional time out,which usually resumes after a few minutes. I am using the batch process for 4to 5  tiles at a time & as I said all is working well. I have about 20 tiles processed & installed in x plane11 using hd global sceneryv4 for the overlays. I find that for me using the batch process is the best way to go. On the map page I hold shift & click on the tiles I want then tick the build masks & build overlays boxes then click batch build & it starts processing all the tiles.

                                                                                                                                                      Ron

[AAN1718A 20]

I hear a lot of good things about Ortho4XP, but I am a simple bloke that don't know about tiles conversions, vector sources and redistributing source formats and LOD values with binary triangulation based on OSM density values ... anyway that what it sounds like to me.

Is there just a simple download and install?

[Deadraque 0]

I gave up on tile downloads for the moment

I found a new solution and it works great but you need to be patient, but it is freaking great!

 

https://forums.x-plane.org/index.php?/files/file/36327-us-orthophotos/

 

 

[p71interceptor 0]

Im now downloading a different tile and its working. 

[MarioB 4]

Same here. Stuck at the same place (for the default tile):

Step 1 : Building OSM and patch data for tile +48-006 :
.......
     A total of 0 node(s) and 0 relation(s).
    Obtaining OSM data for way["natural"="coastline"]
     Done.

Anti-virus modified to accommodate O4XP1.20b.exe. Same result

[Einar 0]

I am using Steam edition. Now I have finised a tile and  moved to the advised folder and started X-plane and the airport is now sourrounded with water. What has gone wrong here?

[Einar 0]

Hi, need some help here :-)

[chadgr 0]

I was also having this problem until I followed the instructions on this page: https://forums.x-plane.org/index.php?/forums/topic/140255-still-stuck-on-step-1-read-this/

Now things are working again and I can get past the OSM step. Hope this helps.

[Fooshman 0]

On ‎9‎/‎02‎/‎2018 at 5:32 AM, Einar said:

Hi, need some help here :-)

Use a different base source..if you preview the tile you'll see that it doesn't have an image.

[Einar 0]

Thanks, now I use Bing instead of Go2. That work fine. But I have another problem who is very strange: These photo sdcenery should be in the bottom of the ini file. I have done that, but they will not load, only loads when in top of the ini file. Then my airport will not load. I notised when deleting the ini file, X-plane wrote a new ini file and placed my ortho4xp files in the bottom, and then they will not load, I had to bring them to the top?? This is against all I have read about editing and order in the ini file.

[JohnLSharp 0]

Hi,

I've been trying to create a tile for Latitude 40 Longitude -004 (Madrid area) but  it gets stuck at step 1 (Build Data Vector) (Please see below). I have managed to create many other tiles with no problems whatsoever but I seem to get into trouble with this region.  Any help / suggestions welcome...

Step 1 : Building OSM and patch data for tile +40-004 : 
--------

-> Downloading airport and water/ground boundary data from Openstreetmap :
    Recycling OSM data for way["aeroway"="aerodrome"]
     A total of 472 node(s) and 8 way(s).
       *      Aeródromo de Guadalix de la Sierra
       * LEMD Aeropuerto de Madrid-Barajas
       * LETO Base Aérea de Torrejón
       *      Aeródromo Loring
       *      Aeródromo de Valdelaguna.
       *      Aeródromo de Griñón
       *      Aeródromo Villanueva del Pardillo.
       *      Aeródromo de Villaconejos.
    Recycling OSM data for rel["aeroway"="aerodrome"]
     A total of 0 node(s) and 0 relation(s).
    Recycling OSM data for way["aeroway"="heliport"]
     A total of 0 node(s) and 0 way(s).
    Recycling OSM data for way["natural"="water"]["tidal"!="yes"]