RonF

Hi, I am getting the same data128 error .I am using Fs Mania's route from Ksea to Pakt using his fms entrries, sids transitions & way points. His flight was done in April 2015 so perhaps I need to look at a new route procedure I have the latest navdata& registered Fsuipc. I don't get a ctd ,the data 128 message appears after take off short of the Arrie departure waypoint, the vnav disengages as the message appears . So I will try an updated route & see what happens. I have not tried the Klas klax route yet. Ron (new at this part of simming) :smile: FS Mania route : Ksea Arrie.j523 .Yzt next Yzt.j502 .Ann next Dwarf Pakt Departure 16l Banger7(now8) & then Arrie trans.

Also try with a stock cfg file.Moving the slider to really low settings shouldn't be required. Mine are about 3/4 to the right on everything.

Hi, I have had this a/c for quite a while & the frame rates are not an issue. Depending where I fly I am getting well above 30 on avg. I kind of stay away from socal at present orbyx oom issues. But my fps are okay in that area.I guess I could move my sliders to a much lower setting to avoid the oom but I don't.My rig is similar to yours except that I do not have Vector installed & I have a 980ti card& 32GB system ram I would try disabling everything in vector except the roads My 4790 is overclocked to 4.6ghz.You should be able to achieve much better frame rates with your system.Oh by the way I don't have any tweaks in my p3dv3 cfg file. Try going with a stock cfg file & see what happens. From experience I have tried tweaks & my sim seems to run much better without them. Ron

Try looking at your control assignments in p3d I know you are using Fsuipc but some times p3d by default will assign the trim to one of the mixture levers. Worth a look Ron

There should be a read me file enclosed within the zip, just follow the directions real close & you should be okay Ron

Running just fine on my win10 pro

Great to hear about the clickspots in the vc.I know what you mean about the shift+n use. Ron

Hi Ray, I am not having a crappy time with this mod, just learning all the different features.I use shift+7 to get that yellow box with the config. panel. I just thought there was a shortcut :smile: As I stated earlier I have the shift+7 assigned to a button on my controller. All is well. Ron

Hi Ray, Okay I got the popup using shift+7. Is there a hotspot on the panel to bring this up? i tried clicking all over the upper left side of the upper panel but no luck.I applied the shift+7 to one of my controller buttons so it works well.I am having a great time flying this aircraft that I have been neglecting the Hawker & Phenom 300 both with Berts's gtn 750 mods. Ron

Hi Ray, On the left click spot is that the one shown in your post #33, I'll give it a go , thanks Ron

Ray, I am using P3d v3.2 & everything that you suggested I followed & I still cannot get the nav button to function in either the popup or the mode select panel above the pfd, it works fine using the keyboard combo which I don't mind using, I just thought that I may have missed something on the 1.4 mod install. Everything else looks good,although the gpu does not show up in C&D startup. Many thanks Ron

Hi, I am having a problem activating the Nav on auto pilot. I have installed the newest update from Carenado, & also the 1.4 mod for the Gtn750.After setting up a flight plan or direct to the active nav on the pfd is showing gps, airspeed,dest.& distance & is also displayed on the info bar along with alt etc.. The gtn also is indicating gps on the bottom info bar.Prior to Taxi I have set up alt select,heading & vs speed usually 2000fpm, after takeoff I activate the a/p select hdg, & continue on course & then try to activate the nav which will not function using the mouse. I can actvate the nav using ctl+n on the keyboard. I don't know if I am missing a file in the new 1.4 setup or something in one of the folders, perhaps i can be informed as to what to look for in the folder/ file setup on the 1.4 mod. Thanks Ron

Hey Lamar, Got it going & also thanks to Rich, Mitch & you for all the help &info.Really great to have the weather back.I have not installed soft clouds yet hmmmm I wonder :wink: dare I I was wondering what Sasquashtoo's name was.Anyway I'm off to redownload the latest cj2 from Carenado & install Ray's mod squad 1.4mods,kind of got detoured. Ron

Hi Lamar, Had the same thing happen to me , thought I had it fixed(silly me) Just got back from some shopping, I am going to try a couple of different things with p3d & I'll get back to you.I am in Prescott Arizona & there is rain & clouds today so this should be interesting, to say the least. Ron

Hi Pete, Oops , I meant P3d{long day & night yesterday)talk about confused :wink: Anyway I have a couple of things to try before I uninstall/install Rex. I am going to copy the original cloud.fx file into the sim, run P3d without activating Asn using p3d weather. I don't know if this will work but what the hell have to try something. I know Lamar is waiting to hear from Rex on his same problem

Well so much for that, after the new cloud.fx file installed & I got my weather& clouds back I shut down P3dv3 later on , When I restarted p3d later it reverted back to the old no texture loading again. I am going to d/l the cloud.fx file one more time & see what happens.There might be a corrupted weather file loading into asn from Rex I may have to uninstall/ reinstall one more time.. Ron okay it looks like there is a corrupted file being injected into asn from rex (I think) I installed Sebastion's new cloud file started Rex again & voila I have weather, clouds etc..I shut down the sim, restarted went to Cottonwood Az where there is rain & clouds but I was getting wispy cirrus clouds with sunshine. I remember seeing an error in the process log so a reinstall may be forthccoming

Hi Sebastian, Yep that did indeed fix the problem.As you said it was probably a corrupted cloud.fx file now I have my weather back. Thanks to all who helped out. I still have to install soft clouds so fingers crossed. Ron

Hi Rich, Yeah I totally uninstalled my original Rex & all the updates & went to the Fss & d/l the newest Rex installer package & I am using the administrator rights in both asn& rex. Still getting the same results=no textures, I noticed that lamar posted on the rex forum some screen shots & installation log. Will see what happens with that.I was having no problems about 2 to 3 weeks ago & then this!! Thanks Ron

Hi Lamar, Yes I am also on win10 64. all my paths are correct & the install log indicates that the textures are indeed being installed into P3d v3, in my process log there seems to be some errors showing up, it is looking for Fsx which I don't have installed anywhere on my computer, The path for asn& rex are correct p3d v3. REX TEXTURE DIRECT - PROCESS LOG settings.loadOptions() System.NullReferenceException: Object reference not set to an instance of an object. at rextexturedirect_sc.controls.settings.loadOptions() REX TEXTURE DIRECT - PROCESS LOG install.installTheme() - System.IO.DirectoryNotFoundException: Could not find a part of the path '\Scenery\Global\Texture\AIR_Jetway2.dds'. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite, Boolean checkHost) at System.IO.File.Copy(String sourceFileName, String destFileName, Boolean overwrite) at rextexturedirect.functions.install.installTheme(String strThemeID) EX TEXTURE DIRECT - PROCESS LOG startapplication.startFSX() - System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo) at System.Diagnostics.Process.Start() at rextexturedirect.functions.startapplication.startFSX() So I am at a point where I do not know what to do next , waiting on Rex .Boy the process logs are messed up!! :wink: Ron

Hi Lamar, Well I uninstalled everything Rex, reinstalled as per instructions from Rex, (without the soft clouds) & I get the same result no textures from Rex, sunshine where Asn is indicating cloudy.looks like I will be flying in clear skys for awhile until Rex comes up with a solution.I am running Rex as administrator so that part is covered.Spending too much time on this !!!! I used to have Fex from flight1 on fsx & i see that they have a new Fex for p3dv3, I may look into that if nothing is forthcoming from Rex. Ron

I am getting the same thing, no textures showing up in Asn,from Rex my path to the asn weather engine is correct. I have tried everything short of reinstalling Rex again. Even using the weather themes =same problem no change in clouds. I am at kprc (Prescott Az ) & asn is indicating cloudy yet the sim is showing some wispy cirrus clouds. I have also gone into the weather themes & selected a theme & installed but there is no change.Hope we can get a remedy for this. I am currently downloading the original program from FSS store but then I will have to reinstall soft clouds etc... Ron

Hi Ray, Yeah I had to go into the gauge folder & delete those files & folders long with deleting the entry in simobjects,( I could not find the old entry in programs & features probably just missed it the new version did show up.) I installed the new version1.1 & did the gtn mod which installed correctly.(Thanks) I have not got her into the air yet just wanted to see if the gtn was okay. I will check it out along with the a/p later. Ron

Thanks guys for the heads up,,, went with FTX central to update Ron

Hi Brian, Go to YouTube & look up FS Mania he has many tutorials on a lot of aircraft including the H850XP& the Phenom300.I used both of them & they really cleared up a lot of questions & procedures. Ron

I get the same thing happening to me when I try to use the Gtn update , have tried several times to update but keep getting a download timeout also with the sim path registry error so I went back to 3.0 until this gets straightened out. Maybe uninstall & then reinstall the gtn series is needed.The file that I am missing is actually in the correct location so I think I will probably uninstall & reinstall later on. Ron