oke i only found "saitek yoke system" nothing else and should i make a restart before i try?

5 hours ago, ibrahim280901 said:

oke i only found "saitek yoke system" nothing else and should i make a restart before i try?

Uninstall and reboot. Then go into Control Panel, Devices and Printers. You should see them shown there. That’s it really.

"you should see them shown there" what should i see there? maybe i'm a bit confused?

27 minutes ago, ibrahim280901 said:

"you should see them shown there" what should i see there? maybe i'm a bit confused?

You will see an entry for the Saitek yoke and throttle quadrants. That means they have been successfully identified by Windows. And P3D will also 'see' them.

i tried it out just a random fly and it just disconnect automatically randomly like i was close to landing and it disc... where the yoke disc.. is random sometimes when i make takeoff and after few seconds sometimes after like 1 min. I'm so close to give up and i have a rudder on it's way i expect i will get it next week so it's extreme annoying 😞 

Have you checked all the USB hubs in Device Manager have the Power Management option unchecked?

You're not giving me much to be able to help you. I asked if you see the devices in Device and Printers but you don't answer the question.

Jeg ser kun, at mit åg er forbundet i Enhed og printere. Åget har altid været i Device og Printere, men når det automatisk afbrydes, er det væk fra task manager, så åket ikke er tilgængeligt. Jeg tog faktisk et billede, men kunne ikke finde ud af, hvordan jeg uploader det. 

and i have unchecked all the power management 

9 minutes ago, ibrahim280901 said:

and i have unchecked all the power management 

I don’t speak German if that is what your earlier message was in.

You say you have unchecked all power management options but the description of your problem is that they are still active.

Sorry but unless you can give me some new information I can’t help any more.

Do you have the yoke plugged into a USB2 port on the computer? Don’t plug it into a USB3 one.

Edited February 7, 20197 yr by Ray Proudfoot

no my earlier message wasn't german. My problem is that:

1. When i plug my Yoke into my PC my Yoke is ready to use and i can find it in task manager/Device and Printers etc. when i'm in-game and make a fly and after takeoff it automatically disconnect, how it feels like is my game freeze 1-2 sec and come back and my Yoke is disconnect (the reason for the freeze is because my Yoke disconnect) if i unplug the Yoke self the same will happen 1-2 freeze it haven't with my game the question is why it automatically disconnect because it was not such forever. It happens when i USE the Yoke when it is just plugged in my pc and do nothing with the yoke example i will play later and make everything ready my yoke is plugged in my pc then nothing happens (what i notice, doens't hope i'm wrong) but as soon as i starting using my Yoke after some seconds it change not exact the same seconds everytime but circa 30 seconds sometimes 1 minute then disconnect. Of course it happens when i land no difference.

2. I had tried to change the USB-port. USB 3.0 should be blue coloured what i found in my research and black 2.0 and tried to change them still the same tried for 1-2 others too for see if there was any issue with the port.

3. Tell me what information you need. Just a reminder it is not a problem i had always. Got it for like 1 month ago.  

What is your operating system?

What flight simulator are you flying?

Do you have the Saitek throttles? Where are they plugged in? Saitek yoke or direct into PC.

Do the throttles stop responding too?

10 hours ago, ibrahim280901 said:

1. When i plug my Yoke into my PC my Yoke is ready to use and i can find it in task manager/Device and Printers etc. when i'm in-game and make a fly and after takeoff it automatically disconnect, how it feels like is my game freeze 1-2 sec and come back and my Yoke is disconnect (the reason for the freeze is because my Yoke disconnect) if i unplug the Yoke self the same will happen 1-2 freeze it haven't with my game the question is why it automatically disconnect because it was not such forever. It happens when i USE the Yoke when it is just plugged in my pc and do nothing with the yoke example i will play later and make everything ready my yoke is plugged in my pc then nothing happens (what i notice, doens't hope i'm wrong) but as soon as i starting using my Yoke after some seconds it change not exact the same seconds everytime but circa 30 seconds sometimes 1 minute then disconnect. Of course it happens when i land no difference

It's possible that this is a very simple problem like a faulty connection in the USB cable or the connector. I have a well-used USB card reader that behaves like this, disconnecting and reconnecting unpredictably if you nudge the cable slightly. You might try seeing it you see a difference between trying to operate the yoke alone and leaving it alone. For example, save a situation where you are flying along on autopilot and load that without touching the yoke. You never know, sometimes we get hung up looking for complicated answers to simple problems...

#Ray Proudfoot

Windows 10 Home 

Processor : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz   3.60GHz

installed RAM: 24GB  

System type: 64bit operating system, x64 based processor 

Computer type: Desktop

Is this wrong information about the opertaing system?? please say it 🙂

 

 

 

@ibrahim280901, that’s the OS. What flight sim? P3D? X-Plane?

And do the throttles also stop working?

@ Mark DH 

okay, så du vil have mig til at lave et fly og bare lade det stå på auto-pilot og bare se om oket frakobler auto igen? Og en ting, jeg vil tilføje, er, at den ikke tilslutter mig, jeg skal gøre det selv  (tag stikket ud og replik kablet).