B777 Engine Fire on Takeoff

[Manolocs 0]

Hello, I am trying to fly the ENG FIRE after takeoff, but the acft does not respond for my inputs, starts to turn left away from the magenta line and goes down.

I make sure the aircraft is not heavy, (245T) departing from a sea level airport but still does not flight. Is there any manual to follow how to set up correctly the acft to be sure my setup is not correct?

Thanks in advance.😖

[skelsey 765]

Could you elaborate on how you are trying to fly the aircraft? V speeds would be useful as well (how did you calculate them?)

This might help pin down whether the issue lies with your technique or somewhere else.

[Ephedrin 418]

that's normal that it turns towards the side of the lost engine.. As your rudder doesn't work, please make sure that Autorudder is DEACTIVATED in your sim options.

Edited May 5, 2018 by Ephedrin

[downscc 1,327]

My goodness, doesn't follow the magenta line.  Try FCTM Take offs with Engine Failure 3.31.

[scandinavian13 5,192]

On 5/5/2018 at 4:43 AM, Manolocs said:

Hello, I am trying to fly the ENG FIRE after takeoff, but the acft does not respond for my inputs, starts to turn left away from the magenta line and goes down.

I make sure the aircraft is not heavy, (245T) departing from a sea level airport but still does not flight. Is there any manual to follow how to set up correctly the acft to be sure my setup is not correct?

Thanks in advance.😖

To be honest, if you don't know the product well enough to know that it comes with:

• The Flight Crew Training Manual (FCTM)
• FCOM v1; and
• FCOM v2

...chances are, you might want to spend a little more time getting used to properly flying it, and knowing the documentation, before trying to break it.

Walk before you run.