June 19, 20196 yr I used to own the F1 version of the GTN 750 and when I was running FSX I did manage to intergrate it into the VC of Aerosoft's Twin Otter. I can't for the life of me remember how it was done. I now have the RXP version of the GTN and run P3D v4.5. After following the posts on this forum I have it installed in all my A2A aircraft, but I was just wondering if anyone could point me in the direction of doing the same with the Twotter. Thanks Ian Edited June 20, 20196 yr by IanFisher
June 19, 20196 yr Try.. [VCockpit01] ... //gauge10=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_GPS!GPS_530vc3D, 4,4,332,248 gauge10=rxpGTN!GTN_750_1, 4, -50, 332, 300, NO_BEZEL Edited June 19, 20196 yr by Bert Pieke Bert
June 20, 20196 yr Hi Bert: I own the F1 GTN750. Would you please post the panel entry for the Aerosoft Twin Otter? Thank you very much! Airbus320 Al Kaupa Digital Storm purchased 8/17/2011; Win7x64: Asus P8P67 Deluxe; Intel i7 2600K@3,9 GHZ; nVidia GTX 560Ti; 8GB DDR3 1600 Corsair Dominator; Power Corsair HX 750W; Samsung 850 EVO 500GB SSD; 300GB WD VelociRaptor; 1TB Seagate.
June 20, 20196 yr Author 2 hours ago, Bert Pieke said: Try.. [VCockpit01] ... //gauge10=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_GPS!GPS_530vc3D, 4,4,332,248 gauge10=rxpGTN!GTN_750_1, 4, -50, 332, 300, NO_BEZEL Thanks for the info Bert. It worked first time. Now do you know how I can access Comm1 and Nav1 as I don't have the top part of the GTN display in the VC. The shift4 key pops out the default GNS530. And also as I'm on a role, do you know how to get to the GTN settings panel as control right click does not work in the VC? Thanks Ian
June 20, 20196 yr Good! Now replace the Window01 section: [Window01] Background_color=0,0,0 size_mm=937,887 ident=14401 position=8 window_size= 0.340, 0.580 zorder=99 gauge00=rxpGTN!GTN_750_1, 0,0,937,887 Shift+2 will pop up the GTN, and there you can adjust the settings.. Edited June 20, 20196 yr by w6kd removed extraneous "gauge00=" at user request Bert
June 20, 20196 yr Author Hi Bert Thanks again for your help, however I this needs a little bit more work to get it right. Having followed your instructions to replace [Window01] I observe the following Shift+2 does nothing whereas before it was the checklist Shift+3 is the Panel Set as before Shift+4 is the GNS530 as before So I've lost the checklist and still have the default GPS. Here is the Panel.cfg Thoughts? Ian // ******************************** // *** Aerosoft *** // *** Finn Jacobsen *** // *** Juni 2013 *** // ******************************** [Window Titles] Window00=Main Window01=Checklist Window02=Panel sel Window03=GPS [VIEWS] VIEW_UP_DIR=-20.4, 0.0, -45.0 VIEW_FORWARD_ZOOM=1.0 VIEW_FORWARD_DIR=0.0, 0.0, 0.0 //--------------------------------------- [Window00] file=Panel_2D.bmp size_mm=800, 600 position=5 BACKGROUND_COLOR=0,0,0 visible=1 ident=MAIN_PANEL //---------------------------------------- [Window01] Background_color=0,0,0 size_mm=937,887 ident=14401 position=8 window_size= 0.340, 0.580 zorder=99 gauge00=gauge00=rxpGTN!GTN_750_1, 0,0,937,887 //[Window01] //size_mm= 338, 650 //window_size=0.3 //windowsize_ratio=0.55 //window_pos= 0.010,0.035 //BACKGROUND_COLOR=0,0,0 //VISIBLE=1 //sizeable=1 //ident=12345 //gauge00=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistA100, 0, 0, 338, 650 //gauge01=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistB1, 0, 0, 1, 1 //gauge02=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistB2, 0, 0, 1, 1 //gauge03=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistB3, 0, 0, 1, 1 //gauge04=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistC, 0, 0, 1, 1 //gauge05=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistD, 0, 0, 1, 1 //---------------------------------------- [Window02] size_mm= 450, 450 window_size=0.14 windowsize_ratio=0.55 window_pos= 0.005,0.81 BACKGROUND_COLOR=0,0,0 VISIBLE=1 sizeable=1 ident=23456 gauge00=TW_Chk!Panel_sel, 0, 0, 450, 420 //-------------------------------------------------------- [Window03] Background_color=0,0,0 size_mm=479,355 window_size=0.25,0.33 position=2 visible=0 ident=34567 gauge00=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_GPS!GPS_530frame2D, 0,0,479,355 gauge01=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_GPS!GPS_530view2D, 78,29,330,248 //-------------------------------------------------------- [VCockpit01] file=$DHC6VIRTGAUGES.bmp Background_color=0,0,0 size_mm=512, 512 visible=1 pixel_size=512, 512 texture=$DHC6VIRTGAUGES gauge00=TW_system!TW_Sys1, 0, 0, 1, 1 gauge01=TW_system!TW_Sys2, 0, 0, 1, 1 gauge02=TW_system!TW_Sys3, 0, 0, 1, 1 gauge03=TW_system!TW_Ap, 0, 0, 1, 1 gauge04=TW_system!TW_Ann, 0, 0, 1, 1 gauge05=TW_system!TW_FDR, 0, 0, 1, 1 gauge06=TW_System!TW_State, 0, 0, 1, 1 gauge07=TW_System!Twot_vibr, 0, 0, 1, 1 gauge08=ASC!MAIN, 0,0, 10, 10, 0 gauge09=TW_Disp!Com_Nav_Disp, 345, 4, 162, 218 //gauge10=TW_GPS!GPS_530vc3D, 4,4,332,248 gauge10=rxpGTN!GTN_750_1, 4, -50, 332, 300, NO_BEZEL gauge11=TW_Disp!DME, 8, 298, 357, 70 gauge12=TW_Disp!ADF, 8, 378, 475, 53 gauge13=TW_Disp!Transp, 8, 441, 457, 64 gauge14=TW_Disp!Clock, 377, 236, 125, 97 gauge15=TW_System!TW_APIAS, 0, 0, 1, 1 [Default View] X=0 Y=0 SIZE_X=8191 SIZE_Y=6143 Edited June 25, 20196 yr by IanFisher
June 20, 20196 yr gauge00=gauge00=rxpGTN!GTN_750_1, 0,0,937,887 is incorrect, my bad... Should be: gauge00=rxpGTN!GTN_750_1, 0,0,937,887 You can also replace the old GNS Window by the checklist window... your choice Edited June 20, 20196 yr by Bert Pieke Bert
June 20, 20196 yr Author Hi again Almost there. Swaping the line above has worked. I now have Shift+2 is the RXP GTN750 Shift+3 is the Panel Set as before Shift+4 is now nothing. I get a brief outline of where the checklist should be then nothing. I replaced the old GNS window with the checklist window but obviously not got it quite right. Latest Panel.cfg is here. Any ideas? Ian // ******************************** // *** Aerosoft *** // *** Finn Jacobsen *** // *** Juni 2013 *** // ******************************** [Window Titles] Window00=Main Window01=Checklist Window02=Panel sel Window03=GPS [VIEWS] VIEW_UP_DIR=-20.4, 0.0, -45.0 VIEW_FORWARD_ZOOM=1.0 VIEW_FORWARD_DIR=0.0, 0.0, 0.0 //--------------------------------------- [Window00] file=Panel_2D.bmp size_mm=800, 600 position=5 BACKGROUND_COLOR=0,0,0 visible=1 ident=MAIN_PANEL //---------------------------------------- [Window01] Background_color=0,0,0 size_mm=937,887 ident=14401 position=8 window_size= 0.340, 0.580 zorder=99 gauge00=rxpGTN!GTN_750_1, 0,0,937,887 //[Window01] //size_mm= 338, 650 //window_size=0.3 //windowsize_ratio=0.55 //window_pos= 0.010,0.035 //BACKGROUND_COLOR=0,0,0 //VISIBLE=1 //sizeable=1 //ident=12345 //gauge00=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistA100, 0, 0, 338, 650 //gauge01=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistB1, 0, 0, 1, 1 //gauge02=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistB2, 0, 0, 1, 1 //gauge03=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistB3, 0, 0, 1, 1 //gauge04=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistC, 0, 0, 1, 1 //gauge05=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistD, 0, 0, 1, 1 //---------------------------------------- [Window02] size_mm= 450, 450 window_size=0.14 windowsize_ratio=0.55 window_pos= 0.005,0.81 BACKGROUND_COLOR=0,0,0 VISIBLE=1 sizeable=1 ident=23456 gauge00=TW_Chk!Panel_sel, 0, 0, 450, 420 //-------------------------------------------------------- [Window03] size_mm= 338, 650 window_size=0.3 windowsize_ratio=0.55 window_pos= 0.010,0.035 BACKGROUND_COLOR=0,0,0 VISIBLE=1 sizeable=1 ident=12345 gauge00=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistA100, 0, 0, 338, 650 gauge01=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistB1, 0, 0, 1, 1 gauge02=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistB2, 0, 0, 1, 1 gauge03=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistB3, 0, 0, 1, 1 gauge04=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistC, 0, 0, 1, 1 gauge05=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!//TW_ChecklistD, 0, 0, 1, 1 //-------------------------------------------------------- [VCockpit01] file=$DHC6VIRTGAUGES.bmp Background_color=0,0,0 size_mm=512, 512 visible=1 pixel_size=512, 512 texture=$DHC6VIRTGAUGES gauge00=TW_system!TW_Sys1, 0, 0, 1, 1 gauge01=TW_system!TW_Sys2, 0, 0, 1, 1 gauge02=TW_system!TW_Sys3, 0, 0, 1, 1 gauge03=TW_system!TW_Ap, 0, 0, 1, 1 gauge04=TW_system!TW_Ann, 0, 0, 1, 1 gauge05=TW_system!TW_FDR, 0, 0, 1, 1 gauge06=TW_System!TW_State, 0, 0, 1, 1 gauge07=TW_System!Twot_vibr, 0, 0, 1, 1 gauge08=ASC!MAIN, 0,0, 10, 10, 0 gauge09=TW_Disp!Com_Nav_Disp, 345, 4, 162, 218 //gauge10=TW_GPS!GPS_530vc3D, 4,4,332,248 gauge10=rxpGTN!GTN_750_1, 4, -50, 332, 300, NO_BEZEL gauge11=TW_Disp!DME, 8, 298, 357, 70 gauge12=TW_Disp!ADF, 8, 378, 475, 53 gauge13=TW_Disp!Transp, 8, 441, 457, 64 gauge14=TW_Disp!Clock, 377, 236, 125, 97 gauge15=TW_System!TW_APIAS, 0, 0, 1, 1 [Default View] X=0 Y=0 SIZE_X=8191 SIZE_Y=6143 Edited June 25, 20196 yr by IanFisher
June 20, 20196 yr Try removing the // that you had added earlier.. / ******************************** // *** Aerosoft *** // *** Finn Jacobsen *** // *** Juni 2013 *** // ******************************** [Window Titles] Window00=Main Window01=GTN 750 Window02=Panel sel Window03=Checklist [VIEWS] VIEW_UP_DIR=-20.4, 0.0, -45.0 VIEW_FORWARD_ZOOM=1.0 VIEW_FORWARD_DIR=0.0, 0.0, 0.0 //--------------------------------------- [Window00] file=Panel_2D.bmp size_mm=800, 600 position=5 BACKGROUND_COLOR=0,0,0 visible=1 ident=MAIN_PANEL //---------------------------------------- [Window01] Background_color=0,0,0 size_mm=937,887 ident=14401 position=8 window_size= 0.340, 0.580 zorder=99 gauge00=rxpGTN!GTN_750_1, 0,0,937,887 //---------------------------------------- [Window02] size_mm= 450, 450 window_size=0.14 windowsize_ratio=0.55 window_pos= 0.005,0.81 BACKGROUND_COLOR=0,0,0 VISIBLE=1 sizeable=1 ident=23456 gauge00=TW_Chk!Panel_sel, 0, 0, 450, 420 //-------------------------------------------------------- [Window03] size_mm= 338, 650 window_size=0.3 windowsize_ratio=0.55 window_pos= 0.010,0.035 BACKGROUND_COLOR=0,0,0 VISIBLE=1 sizeable=1 ident=12345 gauge00=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!TW_ChecklistA100, 0, 0, 338, 650 gauge01=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!TW_ChecklistB1, 0, 0, 1, 1 gauge02=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!TW_ChecklistB2, 0, 0, 1, 1 gauge03=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!TW_ChecklistB3, 0, 0, 1, 1 gauge04=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!TW_ChecklistC, 0, 0, 1, 1 gauge05=../SimObjects/Airplanes/Aerosoft_DHC6_300_WHEEL/Panel/TW_Chk!TW_ChecklistD, 0, 0, 1, 1 //-------------------------------------------------------- [VCockpit01] file=$DHC6VIRTGAUGES.bmp Background_color=0,0,0 size_mm=512, 512 visible=1 pixel_size=512, 512 texture=$DHC6VIRTGAUGES gauge00=TW_system!TW_Sys1, 0, 0, 1, 1 gauge01=TW_system!TW_Sys2, 0, 0, 1, 1 gauge02=TW_system!TW_Sys3, 0, 0, 1, 1 gauge03=TW_system!TW_Ap, 0, 0, 1, 1 gauge04=TW_system!TW_Ann, 0, 0, 1, 1 gauge05=TW_system!TW_FDR, 0, 0, 1, 1 gauge06=TW_System!TW_State, 0, 0, 1, 1 gauge07=TW_System!Twot_vibr, 0, 0, 1, 1 gauge08=ASC!MAIN, 0,0, 10, 10, 0 gauge09=TW_Disp!Com_Nav_Disp, 345, 4, 162, 218 //gauge10=TW_GPS!GPS_530vc3D, 4,4,332,248 gauge10=rxpGTN!GTN_750_1, 4, -50, 332, 300, NO_BEZEL gauge11=TW_Disp!DME, 8, 298, 357, 70 gauge12=TW_Disp!ADF, 8, 378, 475, 53 gauge13=TW_Disp!Transp, 8, 441, 457, 64 gauge14=TW_Disp!Clock, 377, 236, 125, 97 gauge15=TW_System!TW_APIAS, 0, 0, 1, 1 [Default View] X=0 Y=0 SIZE_X=8191 SIZE_Y=6143 Edited June 25, 20196 yr by RXP Bert
June 20, 20196 yr Author You sir are a Scholar and a Gentleman. All is now well in the world of my sim. (till the next issue which knowing p3d and the multiple add-on's won't be far away) I just need to copy this into the various other models, tundra, cargo, floats etc. I don't know if your on the pay role at Reality, but if not they ought to have you on a retainer for the support you give to the community. Thanks and Regards Ian
June 20, 20196 yr 2 hours ago, Ian Fisher said: You sir are a Scholar and a Gentleman. All is now well in the world of my sim. (till the next issue which knowing p3d and the multiple add-on's won't be far away) I just need to copy this into the various other models, tundra, cargo, floats etc. I don't know if your on the pay role at Reality, but if not they ought to have you on a retainer for the support you give to the community. Thanks and Regards Ian No, I am just another user... but certainly happy that you like it Personally, I actually still like the GNS530 better in the Twotter.. just looks more authentic.. Bert
Archived
This topic is now archived and is closed to further replies.