September 25, 20196 yr I use FSUIPC in conjunction with FSX-SE to control all my aircraft from the PMDG models to the stock aircraft without issue. I have a set of CH Rudder Pedals, Yoke and Throttle Quad. FSUIPC controls every aircraft properly except Manfred Jahn's Douglas C-47 Beta V3.14. I have defined separate prop, throttle and mixture controls in FSUIPC as "Send direct to FSUIPC for Calibration" for each CH throttle lever. Prop and mixture controls work properly but the throttle controls do not seem to interface with the sims throttles so they do not move from idle cutoff. What am I missing? Thanks in advance, Jim Driskell James M Driskell, Maj USMC (Ret)
September 25, 20196 yr Check and make sure there isn't another axis somewhere, perhaps on a different controller, also assigned to the throttles. When an axis doesn't respond, or responds erratically, it's often a conflicting assignment made automatically by the sim when it detects a "new" controller. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
September 25, 20196 yr Author I got the Douglas C-47 Beta V3.14 sim to respond to FSUIPC throttle input, but only after I first loaded the old DC-3 airways Virtual Airline sim which always responds to its FSUIPC controlled inputs. I shut down the old DC-3 sim and reloaded the Beta version and the throttles started working. I found that I could then redefine the throttles in FSUIPC a couple of different ways. Either way worked. But when I shut down FSX-SE and restarted it, the Beta version had the same problems unless I loaded the other DC-3 version first and then ended its flight before reloading the Beta version. Don't know what is going on because every other sim works properly. I'll keep trying things. Jim Driskell James M Driskell, Maj USMC (Ret)
September 26, 20196 yr Possible ideas over at the FSUIPC forum. FS RTWR SHRS F-111 JoinFS Little Navmap
Archived
This topic is now archived and is closed to further replies.