November 12, 20196 yr Hello guys . I am writing you regarding one problem i sadly faced when buying the newly released Embraer 120 Brasilia & The ATR 72. So the problem i get is after the installation . Which i am pretty sure i did it correctly . When i open P3DV4 and select one of the aircrafts i mentioned above . on the screen it says No Preview available . And when i try to load the plane it says . Visual Flight model couldn't be loaded . I've never faced a problem like this before . Can you help me please ?? , the thing is that i payed for these airplanes and i feel like i spend my money for nothing . I hope you can understand me :) . And it wasn't something that i could afford to buy easily . I did it cause i love Carenado's work . I've already contacted their Support forum on their original website , but the solutions they gave me were things i've already tried :( .So the problem is still there
November 12, 20196 yr That's very odd. I just bought the B120 over the weekend, installed it, and flew it. Preview worked fine. Have you retried uninstalling and then reinstalling? Joel Murray @ CYVR (actually, somewhere about halfway between CYNJ and CZBB)
November 12, 20196 yr I would recommend to uninstall them completely, manually delete any additional repaint you've added. Then, I would download them again from your Carenado account with the A/V and firewall off, and re-install with A/V and firewall off. Good luck. Cheers, Ed Cheers, Ed MSFS2020 Steam // Rig: Corsair Graphite 760T Full Tower - ASUS MBoard Maximus XII Hero Z490 - CPU Intel i9-10900K - 64GB RAM - MSI RTX2080 Super 8GB - [1xNVMe M.2 1TB + 1xNVMe M.2 2TB (Samsung)] + [1xSSD 1TB + 1xSSD 2TB (Crucial)] + [1xSSD 1TB (Samsung)] + 1 HDD Seagate 2TB + 1 HDD Seagate External 4TB - Monitor LG 29UC97C UWHD Curved - PSU Corsair RM1000x // Thrustmaster FCS & MS XBOX Controllers
November 13, 20196 yr Author Hello guys and thank you so much for your replies :) @JRMurray I have already tried that . And it didn't work at all 😞 @edpatino I have also tried removing every single file and reinstalling countless times 😞 . However i haven't tried downloading them again from My Carenado account . I will try to do that :) . Thank you so much for your reply :) @FDEdev //********************************************************* // CARENADO B120 // Copyright © Carenado 2019 - All Rights Reserved //********************************************************* [fltsim.0] title=Carenado B120 WHITE sim=emb120 model= panel= sound= texture= kb_checklists= kb_reference= atc_id= ui_manufacturer="Carenado" ui_type=B120 ui_typerole="Twin Engine TurboProp" ui_createdby="Carenado" ui_variation="WHITE" description="Carenado WHITE" atc_heavy=0 atc_airline= atc_flight_number= atc_id_color=0000000000 visual_damage=1 [fltsim.1] title=Carenado B120 N126HL sim=emb120 model= panel= sound= texture=1 kb_checklists= kb_reference= atc_id=N126HL ui_manufacturer="Carenado" ui_type=B120 ui_typerole="Twin Engine TurboProp" ui_createdby="Carenado" ui_variation="N126HL" description="Carenado N126HL" atc_heavy=0 atc_airline= atc_flight_number= atc_id_color=0000000000 visual_damage=1 [fltsim.2] title=Carenado B120 ER-FMA sim=emb120 model= panel= sound= texture=2 kb_checklists= kb_reference= atc_id=ER-FMA ui_manufacturer="Carenado" ui_type=B120 ui_typerole="Twin Engine TurboProp" ui_createdby="Carenado" ui_variation="ER-FMA" description="Carenado ER-FMA" atc_heavy=0 atc_airline= atc_flight_number= atc_id_color=0000000000 visual_damage=1 [fltsim.3] title=Carenado B120 PH-BRG sim=emb120 model= panel= sound= texture=3 kb_checklists= kb_reference= atc_id=PH-BRG ui_manufacturer="Carenado" ui_type=B120 ui_typerole="Twin Engine TurboProp" ui_createdby="Carenado" ui_variation="PH-BRG" description="Carenado PH-BRG" atc_heavy=0 atc_airline= atc_flight_number= atc_id_color=0000000000 visual_damage=1 [fltsim.4] title=Carenado B120 N3537W sim=emb120 model= panel= sound= texture=4 kb_checklists= kb_reference= atc_id=N3537W ui_manufacturer="Carenado" ui_type=B120 ui_typerole="Twin Engine TurboProp" ui_createdby="Carenado" ui_variation="N3537W" description="Carenado N3537W" atc_heavy=0 atc_airline= atc_flight_number= atc_id_color=0000000000 visual_damage=1 [fltsim.5] title=Carenado B120 PH-XLG sim=emb120 model= panel= sound= texture=5 kb_checklists= kb_reference= atc_id=PH-XLG ui_manufacturer="Carenado" ui_type=B120 ui_typerole="Twin Engine TurboProp" ui_createdby="Carenado" ui_variation="PH-XLG" description="Carenado PH-XLG" atc_heavy=0 atc_airline= atc_flight_number= atc_id_color=0000000000 visual_damage=1 [fltsim.6] title=Carenado B120 C-97 2020 sim=emb120 model= panel= sound= texture=6 kb_checklists= kb_reference= atc_id=C97 ui_manufacturer="Carenado" ui_type=B120 ui_typerole="Twin Engine TurboProp" ui_createdby="Carenado" ui_variation="C-97 2005" description="Carenado C-97 2005" atc_heavy=0 atc_airline= atc_flight_number= atc_id_color=0000000000 visual_damage=1 [fltsim.7] title=Carenado B120 OM-TRY sim=emb120 model= panel= sound= texture=7 kb_checklists= kb_reference= atc_id=OM-TRY ui_manufacturer="Carenado" ui_type=B120 ui_typerole="Twin Engine TurboProp" ui_createdby="Carenado" ui_variation="OM-TRY" description="Carenado OM-TRY" atc_heavy=0 atc_airline= atc_flight_number= atc_id_color=0000000000 visual_damage=1 [fltsim.8] title=Carenado B120 N265SW sim=emb120 model= panel= sound= texture=8 kb_checklists= kb_reference= atc_id=N265SW ui_manufacturer="Carenado" ui_type=B120 ui_typerole="Twin Engine TurboProp" ui_createdby="Carenado" ui_variation="N265SW" description="Carenado N265SW" atc_heavy=0 atc_airline= atc_flight_number= atc_id_color=0000000000 visual_damage=1 [fltsim.9] title=Carenado B120 VH-HUI sim=emb120 model= panel= sound= texture=9 kb_checklists= kb_reference= atc_id=VH-HUI ui_manufacturer="Carenado" ui_type=B120 ui_typerole="Twin Engine TurboProp" ui_createdby="Carenado" ui_variation="VH-HUI" description="Carenado VH-HUI" atc_heavy=0 atc_airline= atc_flight_number= atc_id_color=0000000000 visual_damage=1 [fltsim.10] title=Carenado B120 N191SW sim=emb120 model= panel= sound= texture=10 kb_checklists= kb_reference= atc_id=N191SW ui_manufacturer="Carenado" ui_type=B120 ui_typerole="Twin Engine TurboProp" ui_createdby="Carenado" ui_variation="N191SW" description="Carenado N191SW" atc_heavy=0 atc_airline= atc_flight_number= atc_id_color=0000000000 visual_damage=1 [General] atc_type=Carenado atc_model=EMB120 editable=0 performance= Category = airplane [WEIGHT_AND_BALANCE] max_gross_weight = 25353 empty_weight = 15655 // (pounds) reference_datum_position = 0, 0, 0 // (feet) distance from FlightSim Reference position: (1/4 chord, centerline, waterline) empty_weight_CG_position = 0, 0, 0 // 1(feet) longitudinal, lateral, vertical distance from specified datum max_number_of_stations = 4 station_load.0 = 190, 0.0, 0, -1 //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.1 = 190, 0.0, 0, -1 //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.2 = 0, 1.0, 0, -1 //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.3 = 0, 3.0, 0, -1 //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet) station_name.0 = "captain" station_name.1 = "copilot" station_name.2 = "pax 5900lbs max" station_name.3 = "bag 1217lbs max" //Moments of Inertia empty_weight_pitch_MOI = 95000 empty_weight_roll_MOI = 92000 empty_weight_yaw_MOI = 105000 empty_weight_coupled_MOI= 0 [flight_tuning] cruise_lift_scalar = 1.0 parasite_drag_scalar = 1.0 induced_drag_scalar = 1.5 elevator_effectiveness = 1.0 aileron_effectiveness = 1.0 rudder_effectiveness = 1.0 pitch_stability = 1.0 roll_stability = 1.0 yaw_stability = 1.0 elevator_trim_effectiveness = 1.0 aileron_trim_effectiveness = 1.0 rudder_trim_effectiveness = 1.0 hi_alpha_on_yaw = 1.0 p_factor_on_yaw = 0.5 torque_on_roll = 0.5 gyro_precession_on_yaw = 0.5 gyro_precession_on_pitch = 0.5 gyro_precession_on_roll = 0.5 [GeneralEngineData] engine_type = 5 //0=Piston, 1=Jet, 2=None, 3=Helo-Turbine, 4=Rocket, 5=Turboprop Engine.0 = -7, -10.6, 1.5 Engine.1 = -7, 10.6, 1.5 fuel_flow_scalar = 0.9 //Scalar for fuel flow efficiency min_throttle_limit = -0.24 //Minimum percent throttle. Generally negative for turbine reverser [propeller] thrust_scalar = 1 //Propeller thrust scalar propeller_type = 0 //0=Constant Speed, 1=Fixed Pitch propeller_diameter = 11 propeller_blades = 4 //Number of propeller blades propeller_moi = 50 //Propeller moment of inertia beta_max = 55 //Maximum blade pitch angle for constant speed prop, (degrees) beta_min = 11 //Minimum blade pitch angle for constant speed prop, min_gov_rpm = 23000 //Mininum governed RPM prop_tc = 0.001 //Prop time-constant gear_reduction_ratio = 21.3 //Propeller gear reduction ratio fixed_pitch_beta = 0 //Fixed pitch angle of fixed pitch prop, (degrees) low_speed_theory_limit = 80 //Speed at which low speed theory becomes blended in (feet/second) prop_sync_available = 1 //Prop synchronization available? 0=FALSE, 1=TRUE prop_deice_available = 1 //Prop de-icing available? 0=FALSE, 1=TRUE prop_feathering_available= 1 //Prop feathering available? 0=FALSE, 1=TRUE prop_auto_feathering_available= 1 //Prop auto-feathering available? 0=FALSE, 1=TRUE min_rpm_for_feather = 400 //Minimum RPM for prop feathering beta_feather = 86 //Feathering pitch angle (degrees) 86 power_absorbed_cf = 1 //Coefficient of friction for power absorbed by propeller defeathering_accumulators_available= 0 //Defeathering accumulators available? 0=FALSE, 1=TRUE prop_reverse_available = 2 //Prop reverse available? 0=FALSE, 1=TRUE minimum_on_ground_beta = 10.5 //Miminum pitch angle on ground, (degrees) minimum_reverse_beta = -16 //Minimum pitch angle in reverse, (degrees) propeller.0 = 15, 1, -1.5 Propeller.1 = 15, -1, -1.5 [TurbineEngineData] fuel_flow_gain.0 = 35, 0.001 fuel_flow_gain.1 = 40, 0.006 fuel_flow_gain.2 = 65, 0.007 fuel_flow_gain.3 = 70, 0.04 //fuel_flow_gain = 0.04 inlet_area = 0.5 //Square Feet, engine nacelle inlet area rated_N2_rpm = 27700 //RPM, second stage compressor rated value static_thrust = 180 //Lbs, max rated static thrust at Sea Level [turboprop_engine] power_scalar = 1 //Scalar on Turboprop power maximum_torque = 7000 //Maximum torque available (ft-lbs) [electrical] ;BusType, MaxAmpLoad, MinVoltage BusTypes:0=MainBus,1=AvionicsBus,2=BatteryBus,3=HotBatteryBus,4-7=Generator/AlternatorBus(1-4) flap_motor = 0, 5 , 17.0 gear_motor = 0, 5 , 17.0 autopilot = 0, 5 , 17.0 avionics_bus = 0, 5 , 17.0 avionics = 1, 5 , 17.0 pitot_heat = 0, 2 , 17.0 additional_system = 0, 2 , 17.0 marker_beacon = 1, 2 , 17.0 gear_warning = 0, 2 , 17.0 fuel_pump = 3, 5 , 17.0 starter1 = 0, 20, 17.0 light_nav = 0, 5 , 17.0 light_beacon = 0, 5 , 17.0 light_landing = 0, 5 , 17.0 light_taxi = 0, 5 , 17.0 light_strobe = 0, 5 , 17.0 light_panel = 0, 5 , 17.0 //0 Class <0=none,1=wheel, 2=scrape, 3=float> //1 Longitudinal Position (feet) //2 Lateral Position (feet) //3 Vertical Position (feet) //4 Impact Damage Threshold (Feet Per Minute) //5 Brake Map (0=None, 1=Left, 2=Right) //6 Wheel Radius (feet) //7 Steer Angle (degrees) //8 Static Compression (feet) (0 if rigid) //9 Max/Static Compression Ratio //10 Damping Ratio (0=Undamped, 1=Critically Damped) //11 Extension Time (seconds) //12 Retraction Time (seconds) //13 Sound Type //14 Airspeed limit for retraction (KIAS) //15 Airspeed that gear gets damage at (KIAS) [contact_points] static_pitch = -0.8 static_cg_height = 4.4 max_number_of_points = 10 point.0 = 1, 19.9, 0.0, -4.50, 1600, 0, 1.4, 55, 0.55, 1.62, 0.85, 6.0, 6.0, 0, 210, 210 //point.0 = 1, 19.9, 0.0, -4.50, 1600, 0, 1.4, 55, 0.5, 2.0, 0.7, 6.0, 6.0, 0, 210, 210 point.1 = 1, -3.0, -11.3, -5.30, 1600, 1, 1.3, 0, 1.0, 1.5, 0.8, 6.5, 6.5, 2, 215, 215 point.2 = 1, -3.0, 11.3, -5.30, 1600, 2, 1.3, 0, 1.0, 1.5, 0.8, 6.0, 6.0, 3, 220, 220 point.3 = 2, 20.5, 0.0, -1.70, 1600, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0 point.4 = 2, -3.0, -11.2, -2.20, 1600, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0 point.5 = 2, -3.0, 11.2, -2.20, 1600, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0 point.6 = 2, -22.0, 0, -0.90, 1500, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0 point.7 = 2, -5.0, -32.5, 3.00, 1500, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0 point.8 = 2, -5.0, 32.5, 3.00, 1500, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0 point.9 = 2, -37.0, 0.0, 16.00, 1500, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0 gear_system_type=0 [brakes] parking_brake = 1 //Parking brake available toe_brakes_scale = 0.9 //Brake scalar differential_braking_scale = 1 auto_brakes = 0 [LIGHTS] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo, 10=cabin // light.1 = 10, 16.00, -1.60, 4.50, fx_vclightcarB120 light.2 = 10, 16.00, 1.60, 4.50, fx_vclightcarB120 //wing //light.3 = 8, 4, -30, 3, fx_LogoWinglightCarB120 //light.4 = 8, 4, 30, 3, fx_LogoWinglightCarB120 // 7.597 ft //light.5 = 9, -32.00, -1.5, 8, fx_LogoWinglightCarB120 //light.6 = 9, -32.00, 1.5, 8, fx_LogoWinglightCarB120 //light.10 = 3, 4, -30, 3, fx_navred //light.11 = 3, -30.60, -2, 8, fx_navred [gear_warning_system] gear_warning_available = 0 //Normal pct_throttle_limit = 0.39 //Percent throttle that activates warning flap_limit_idle = 0 //Flap angle that activates warning at idle flap_limit_power = 17 //Flap angle that activates warning at above idle [hydraulic_system] normal_pressure = 3000.0 electric_pumps = 1 engine_map = 1,1,0,0 [flaps.0] type = 1 // 1 - tail, 2 - lead span-outboard = 0.65 // 0.0 .. 1.0 extending-time = 12 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 15 // degrees flaps-position.2 = 25 // degrees flaps-position.3 = 45 // degrees damaging-speed = 210 // KIAS blowout-speed = 220 // KIAS system_type = 1 lift_scalar = 0 drag_scalar = 0 [flaps.1] type = 1 // 1 - tail, 2 - lead span-outboard = 0.65 // 0.0 .. 1.0 extending-time = 4 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 15 // degrees flaps-position.2 = 15 // degrees flaps-position.3 = 15 // degrees damaging-speed = 210 // KIAS blowout-speed = 220 // KIAS system_type = 1 lift_scalar = 1.75 drag_scalar = 0.10 pitch_scalar = -0.5 [flaps.2] type = 2 // 1 - tail, 2 - lead span-outboard = 0.65 // 0.0 .. 1.0 extending-time = 12 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 0 // degrees flaps-position.2 = 25 // degrees flaps-position.3 = 25 // degrees damaging-speed = 210 // KIAS blowout-speed = 220 // KIAS system_type = 1 lift_scalar = 0.5 drag_scalar = 0.75 [flaps.3] type = 2 // 1 - tail, 2 - lead span-outboard = 0.65 // 0.0 .. 1.0 extending-time = 12 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 0 // degrees flaps-position.2 = 0 // degrees flaps-position.3 = 45 // degrees damaging-speed = 210 // KIAS blowout-speed = 220 // KIAS system_type = 1 lift_scalar = 0.1 drag_scalar = 0.55 [Radios] // Radio Type = availiable, standby frequency, has glide slope Audio.1 = 1 Com.1 = 1, 1 Com.2 = 1, 1 Nav.1 = 1, 1, 1 Nav.2 = 1, 1, 0 Adf.1 = 1, 1 Transponder.1 = 1 Marker.1 = 1 [keyboard_response] //Breakpoint speeds (knots) on the keyboard increments of control surfaces. //Speed at which the incremenet is reduced to 1/2 and 1/8 respectively. elevator = 150, 250 aileron = 150, 250 rudder = 150, 250 [direction_indicators] //1 Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro, 3=Electro-Mag Slaved Compass, 4=Slaved to another //2 Indicator number of slaving indicator if Type = 4 direction_indicator.0=3,0 direction_indicator.0=4,2 [attitude_indicators] //Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro attitude_indicator.0 = 2 [turn_indicators] //Type: 0=None, 1=Electric Gyro, 2= Vacuum Gyro turn_indicator.0=1,0 [vacuum_system] max_pressure=5.15 //PSI vacuum_type=2 //Type: 0=None, 1=Engine pump (default), 2=Pneumatic, 3=Venturi [pneumatic_system] max_pressure=18.000000 bleed_air_scalar=0.1 //1 [pitot_static] vertical_speed_time_constant = 1 //Increasing this value will cause a more instantaneous reaction in the VSI pitot_heat = 1.0 //Scalar on heat effectiveness, 0 = not available [EFFECTS] wake=fx_wake water=fx_spray dirt=fx_tchdrt concrete=fx_sparks touchdown=fx_tchdwn_s, 1 [fuel] LeftMain = 0, -5, 1, 441, 4 RightMain = 0, 5, 1, 441, 4 fuel_type = 2 //Fuel type: 1 = Avgas, 2 = JetA number_of_tank_selectors = 2 electric_pump=1 [airplane_geometry] wing_area = 424 //Square feet wing_span = 65 //Feet wing_root_chord = 11 //Feet wing_dihedral = 2 //Degrees wing_incidence = 3 //Degrees wing_twist = 2 //Degrees oswald_efficiency_factor= 1 //Measure of lift effeciency of wing wing_winglets_flag = 0 //Are winglets available? wing_sweep = 0 //Degrees, wing leading edge wing_pos_apex_lon = 2 //Feet, longitudinal distance from reference point, negative going aft wing_pos_apex_vert = 1 //Feet, vertical distance from reference point, positive going up htail_area = 172 //Square feet htail_span = 32 //Feet htail_pos_lon = -40 //Feet, longitudinal distance from reference point, negative going aft htail_pos_vert = 1 //Feet, vertical distance from reference point, positive going up htail_incidence = 0 //Degrees htail_sweep = 0 //Degrees, horizontal tail leading edge vtail_area = 190 //Square feet vtail_span = 16 //Feet, tip to body vtail_sweep = 0 //Degrees, vertical tail leading edge vtail_pos_lon = -39 //Feet, longitudinal distance from reference point, negative going aft vtail_pos_vert = 7 //Feet, vertical distance from reference point, positive going up elevator_area = 34 //Square feet aileron_area = 40 //Square feet rudder_area = 34 //Square feet elevator_up_limit = 22 //Degrees elevator_down_limit = 18 //Degrees aileron_up_limit = 23 //Degrees aileron_down_limit = 20 //Degrees rudder_limit = 28 //Degrees elevator_trim_limit = 15 //Degrees spoiler_limit = 0 //Degrees spoilerons_available = 0 //Spoilerons Available? aileron_to_spoileron_gain = 0 //Aileron to spoileron gain min_ailerons_for_spoilerons =0 //Degrees min_flaps_for_spoilerons = 0 //Minimum flap handle position when spoilerons activate auto_spoiler_available = 0 positive_g_limit_flaps_up = 2.8 //Design G load tolerance (positive, flaps up) positive_g_limit_flaps_down= 2 //Design G load tolerance (positive, flaps down) negative_g_limit_flaps_up = -2 //Design G load tolerance (negative, flaps up) negative_g_limit_flaps_down= -2 //Design G load tolerance (negative, flaps down) load_safety_factor = 1.5 //Design G load safety factor [Reference Speeds] flaps_up_stall_speed = 119 //Knots True (KTAS) full_flaps_stall_speed = 89 //Knots True (KTAS) cruise_speed = 200 //Knots True (KTAS) max_mach = 0.52 max_indicated_speed = 272 //Red line (KIAS) //[Reference Speeds] //flaps_up_stall_speed = 119 //Knots True (KTAS) //full_flaps_stall_speed = 89 //Knots True (KTAS) //cruise_speed = 200 //Knots True (KTAS) //max_mach = 0.45 //max_indicated_speed = 272 //Red line (KIAS) [autopilot] autopilot_available= 1 flight_director_available= 1 default_vertical_speed= 0.0 default_bank_mode=0 default_pitch_mode=0 autothrottle_available= 0 pitch_takeoff_ga=8.0 max_pitch=10.0 max_pitch_acceleration=1.0 max_pitch_velocity_lo_alt=2.0 max_pitch_velocity_hi_alt=1.5 max_pitch_velocity_lo_alt_breakpoint=20000.0 max_pitch_velocity_hi_alt_breakpoint=28000.0 max_bank=25.0 max_bank_acceleration=1.8 max_bank_velocity=3.00 max_throttle_rate=0.10 nav_proportional_control=12 nav_integrator_control=0.22 nav_derivative_control=0.00 nav_integrator_boundary=2.5 nav_derivative_boundary=0.0 gs_proportional_control=25 gs_integrator_control=0.26 gs_derivative_control=0.00 gs_integrator_boundary=0.70 gs_derivative_boundary=0.00 yaw_damper_gain = 0.1 [stall_warning] type=2 stick_shaker=0 [deice_system] structural_deice_type=2 //0 = None, 1 = Heated Leading Edge, 2 = Bleed Air Boots, 3 = Eng Pump Boots [exits] number_of_exits = 4 exit.0 = 0.4 // (0=Main 1=Emergency) exit.1 = 0.4 // (0=Main 1=Emergency) exit.2 = 0.4 // (0=Main 1=Emergency) exit.3 = 0.4 // (0=Main 1=Emergency) [Views] // completed eyepoint = 14.5, -1.55, 5.1 //(feet) longitudinal, lateral, vertical distance from reference datum [forcefeedback] stick_shaker_magnitude=5000 ; 0 - 10000 stick_shaker_direction=0 ; 0 - 35999 degrees stick_shaker_period=111111 ; in microseconds gear_bump_nose_magnitude=3000 ; 0 - 10000 gear_bump_nose_direction=18000 ; 0 - 35999 degrees gear_bump_nose_duration=250000 ; in microseconds gear_bump_left_magnitude=2700 ; 0 - 10000 gear_bump_left_direction=9000 ; 0 - 35999 degrees gear_bump_left_duration=250000 ; in microseconds gear_bump_right_magnitude=2700 ; 0 - 10000 gear_bump_right_direction=27000 ; 0 - 35999 degrees gear_bump_right_duration=250000 ; in microseconds ground_bumps_magnitude1=1300 ; 0 - 10000 ground_bumps_angle1=08900 ; 0 - 35999 degrees ground_bumps_intercept1=3.0 ground_bumps_slope1=0.20 ground_bumps_magnitude2=200 ; 0 - 10000 ground_bumps_angle2=09100 ; 0 - 35999 degrees ground_bumps_intercept2=1.075 ground_bumps_slope2=0.035 crash_magnitude1=10000 ; 0 - 10000 crash_direction1=01000 ; 0 - 35999 degrees crash_magnitude2=10000 ; 0 - 10000 crash_direction2=9000 ; 0 - 35999 degrees crash_period2=75000 ; in microseconds crash_duration2=2500000 ; in microseconds [Views] // completed eyepoint = 14.5, -1.55, 5.1 //(feet) longitudinal, lateral, vertical distance from reference datum [CameraDefinition.001] Title = "Right Seat" Guid = {dd85b3b0-4b41-492f-810a-dc6dbcb48afa} Origin = Virtual Cockpit MomentumEffect = Yes SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = 0.41 SmoothZoomTime = 2.0 ZoomPanScalar = 0.5 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.95, 0, -0.1 InitialPbh=10, 0, 350 [CameraDefinition.002] Title = "MFD" Guid = {c1fe097c-9e20-4dfb-867a-9275fce63df1} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = None SnapPbhReturn = False PanPbhAdjust = None PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.45 SmoothZoomTime = 2.0 ZoomPanScalar = 1 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.47, -0.3, 0.4 InitialPbh=0, 0, 0 [CameraDefinition.003] Title = "Central panel" Guid = {3881dc15-ccd4-41d9-8564-3bda167d218e} Origin = Virtual Cockpit MomentumEffect = NO SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = 0.40 SmoothZoomTime = 2.0 ZoomPanScalar = 0.5 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz= 0.47, -0.35, 0.32 InitialPbh=0.0, 0.0, 0.0 [CameraDefinition.004] Title = "Engine Controls" Guid = {67a71f68-2808-4447-9889-d41a1d3d0551} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = None SnapPbhReturn = False PanPbhAdjust = None PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.40 SmoothZoomTime = 2.0 ZoomPanScalar = 0.75 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.47, -0.2, 0.10 InitialPbh=45, 0.0, 0.0 [CameraDefinition.005] Title = "Overhead Panel Top" Guid = {baa64f2f-d3fb-4646-bb3c-e83c33bfec11} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = None SnapPbhReturn = False PanPbhAdjust = None PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.30 SmoothZoomTime = 2.0 ZoomPanScalar = 0.75 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.47, -0.12, 0.15 InitialPbh=-65, 0.0, 0.0 [CameraDefinition.007] Title = "Cabin Pressurization & Autopilot" Guid = {a9fb3ed8-e065-4d8a-8a86-fdbf426b8450} Origin = Virtual Cockpit MomentumEffect = Yes SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = 0.30 SmoothZoomTime = 2.0 ZoomPanScalar = 0.4 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.47, -0.37, 0.15 InitialPbh=70, 0.0, 0.0 [CameraDefinition.008] Title = "FMC" Guid = {bacc045e-acc9-4aed-9f6a-a7aa967c74f4} Origin = Virtual Cockpit MomentumEffect = Yes SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = 0.4 SmoothZoomTime = 2.0 ZoomPanScalar = 0.4 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.56, -0.40, 0.60 InitialPbh=50 ,0.0, 0.0 [CameraDefinition.009] Title = "Back Passenger 1" Guid = {c9513046-df96-42a8-93df-478eb81923f6} Origin = Virtual Cockpit MomentumEffect = Yes SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = FALSE InitialZoom = 0.40 SmoothZoomTime = 2.0 ZoomPanScalar = 0.3 ShowWeather = Yes XyzAdjust = FALSE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=-0.24, -0.22, -5.1 InitialPbh=5, 0.0, 285 [CameraDefinition.010] Title = "Back Passenger 2" Guid = {78462d24-55e1-422a-9b05-f0ba1fdc7719} Origin = Virtual Cockpit MomentumEffect = Yes SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = 0.30 SmoothZoomTime = 2.0 ZoomPanScalar = 0.4 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.73, -0.22, -3.55 InitialPbh=8, 0, 340 [CameraDefinition.1] Title = angle view 1 Guid = {B0CA7E72-F3D9-F748-8BF5-108D197B2469} Description = Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = TrackBank ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.3 ShowWeather = Yes InitialXyz = 0.0, 0.0, 15.0 InitialPbh = 0, 0, 0 XyzAdjust = TRUE Category=Aircraft MomentumEffect=TRUE ClipMode=Minimum ChaseDistance = 10 ChaseHeading = 45 ChaseAltitude = 10 [CameraDefinition.2] Title = angle view 2 Guid = {C690EAFD-223A-42d0-99E0-681ADF93BB59} Description = Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.40 ShowWeather = Yes InitialXyz = 4.4, -1.0, 15.0 InitialPbh = 3, 0, 197 XyzAdjust = TRUE Category=Aircraft ClipMode=Minimum [CameraDefinition.3] Title = angle view 3 Guid = {3A09FD6C-D406-4d8f-A5CD-FA4F5E0C12ED} Description = Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = FlyBy ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.85 ShowWeather = Yes InitialXyz = -5, 0.25, 6.0 InitialPbh = 4, 0, 135 XyzAdjust = TRUE Category=Aircraft ClipMode=Minimum MomentumEffect=FALSE ChaseDistance = 15 ChaseHeading = 5 ChaseAltitude = -5 ChaseTime = 15 [CameraDefinition.4] Title = "angle view 4" Guid = {D8D67955-2E9B-4e75-9D8B-8EFFBBFAC64A} Description = Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.64 ShowWeather = Yes InitialXyz = -2.6, 4.5, -20.0 InitialPbh = 10, 0, 5 XyzAdjust = TRUE Category=Aircraft MomentumEffect=TRUE ClipMode=Minimum [CameraDefinition.5] Title = "angle view 5" Guid = {f25dfa2e-fd2e-4b89-81e2-0575cbcb60de} Description = Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.45 ShowWeather = Yes InitialXyz = -16.0, -0.5, 2.5 InitialPbh = 5, 0, 100 XyzAdjust = TRUE Category=Aircraft ClipMode=Minimum [CameraDefinition.6] Title = "angle view 6" Guid = {7a91803e-898b-435a-8391-725be6a48203} Description = Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = FlatChase ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.55 ShowWeather = Yes InitialXyz = 2.6, 0.0, -6.3 InitialPbh = 0, 0, 350 XyzAdjust = TRUE Category=Aircraft ClipMode=Minimum ChaseDistance = 30 ChaseHeading = 200 ChaseAltitude = 100 MomentumEffect=TRUE [CameraDefinition.7] Title = "angle view 7" Guid = {8A1987D0-09B6-7E48-B4E1-62C5DBE2A720} Description = Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom =0.47 ShowWeather = Yes InitialXyz = 0.0, -1.0, -3.3 InitialPbh = 0, 0, 0 XyzAdjust = TRUE Category=Aircraft MomentumEffect=FALSE ClipMode=Minimum [CameraDefinition.8] Title = "angle view 8" Guid = {8A1987D0-09B6-7E48-B4E1-62C5DBE2A721} Description = Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom =0.53 ShowWeather = Yes InitialXyz = -17.0, -2.1, 13 InitialPbh = -5, 0, 125 XyzAdjust = TRUE Category=Aircraft MomentumEffect=FALSE ClipMode=Minimum [CameraDefinition.9] Title = "angle view 9" Guid = {fc8293a9-efe4-42d7-9902-a281928dce55} Description = Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = FlyBy ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 1.55 ShowWeather = Yes InitialXyz = 0.0, 1.0, 35.0 InitialPbh = 0, 0, 0 XyzAdjust = TRUE Category=Aircraft MomentumEffect=TRUE ClipMode=Minimum ChaseDistance = 10 ChaseHeading = 45 ChaseAltitude = 20 Quote
November 13, 20196 yr Uninstalling, re-downloading and installing with the virus protection turned off seems the only solution I can think off, as the cfg file looks ok for the P3D version.
November 13, 20196 yr Author @FDEdev I've just tried Uninstalling , Re-downloading and installing with the virus protection off and it Doesn't work at all Again 😞 😢 .Thank you so much for replying . I Just hope that there'll be a solution without me having to delete the entire P3D Simulation and install it again . Cause i've created lots of repaints of Some other Carenado planes and i would be very sad if i was losing all of them 😞
November 13, 20196 yr Before re-installing P3D I'd delete the prepar3d.cfg file and let P3D build a new one! I had a similar problem once and for some unknown reason, chosing an airport in a different country, instead of loading the default flight, solved the problem. Edited November 13, 20196 yr by FDEdev
November 13, 20196 yr Author @FDEdev It's really hard for me to delete the entire P3D simulation . I mean yes i have some backups just in case but still ... 😞 . Thank you anyway mate :)
November 13, 20196 yr Author UPDATE : During my attempts to install the Embraer 120 Brasilia . I now just got an error 403 . Saying : The number of Installs for this serial number has been exceeded 😞 . WOWW Can this get any worse ???
November 13, 20196 yr Just send Carenado an e-mail and they will reset your installs. To make sure, instead of re-installing delete the prepar3d.cfg file, maybe this helps.
November 13, 20196 yr Author @FDEdev I already did that mate and it doesn't work again 😢 Just i am curious what this other error i was getting is . Visual Model Could not be displayed . Maybe there is an issue with the MDL files in the Model folder of the plane ??? 😞 😞 😞 😞 😞 😞 . I am so saddd
November 13, 20196 yr If there would be an issue with the mdl files everyone would experience this problem. Very strange. Have tried installing another aircraft since then? Maybe this is a new general P3D problem with your install?
November 13, 20196 yr Author I have also bought the ATR 72 from Carenado and it has the exact same problem 😞 . I feel like i spent my money for nothing . I hope you can understand me :)
November 14, 20196 yr There's apparently a problem with your P3D installation. Maybe a partial re-instal, like client only helps. If even a full P3D reinstall doesn't help, Carenado will for sure return the money 🙂
Archived
This topic is now archived and is closed to further replies.