Jump to content
Sign in to follow this  
youngie63

Scenery Wish List

Recommended Posts

G'day All

First and foremost, apologies if this is the incorrect place to post this but couldn't find another place to post. This is a call for scenery developers to consider 64 bit scenery for the following major citys in Australia. I'm talking payware, not freeware.

1. Adelaide (YPAD) - last version released only good for 32 bit and out of date - no plans for  a 64 bit release 

2. Darwin (YPDN) - A joint civil/military aerodrome and a gateway to Asia making many destinations viable for those that enjoy smaller jets (737, A32x, etc)

3. Canberra (YSCB) - The nations capital. While ORBX has a 64 bit version, it is so far out of date it's not funny. ORBX has no plans to update it as the developer of this scenery has since left. No SODE available for any of the limited number of jetways

4. Hobart (YMHB) - Australias most southern capital city that has its own set of challenges with a medium sized runway and, at times, challenging weather patterns.

While I understand Australia is not high on the list of priorities, it is frustrating when you see global places in the middle of nowhere being released.

Cheers

Steve Young

Canberra 

 

  • Like 2

P3Dv4 - PMDG 747 QOTS II, PMDG 737 NGX, Reboot, MT 6, MJC Q400, ORBX. FlyTampa, FS2Crew voice, Aivlasoft EFB + FSX Steam

 

 

Share this post


Link to post

What sim are needing this for? 


Thank you.

Rick

 $Silver Donor

EAA 1317610   I7-7700K @ 4.5ghz, MSI Z270 Gaming MB,  32gb 3200,  Geforce RTX2080 Super O/C,  28" Samsung 4k Monitor,  Various SSD, HD, and peripherals

 

 

Share this post


Link to post

I have P3Dv4 but I'm guessing X-Plane would be in the same boat.

Cheers Steve


P3Dv4 - PMDG 747 QOTS II, PMDG 737 NGX, Reboot, MT 6, MJC Q400, ORBX. FlyTampa, FS2Crew voice, Aivlasoft EFB + FSX Steam

 

 

Share this post


Link to post
On 1/13/2020 at 1:44 AM, youngie63 said:

G'day All

First and foremost, apologies if this is the incorrect place to post this but couldn't find another place to post. This is a call for scenery developers to consider 64 bit scenery for the following major citys in Australia. I'm talking payware, not freeware.

1. Adelaide (YPAD) - last version released only good for 32 bit and out of date - no plans for  a 64 bit release 

2. Darwin (YPDN) - A joint civil/military aerodrome and a gateway to Asia making many destinations viable for those that enjoy smaller jets (737, A32x, etc)

3. Canberra (YSCB) - The nations capital. While ORBX has a 64 bit version, it is so far out of date it's not funny. ORBX has no plans to update it as the developer of this scenery has since left. No SODE available for any of the limited number of jetways

4. Hobart (YMHB) - Australias most southern capital city that has its own set of challenges with a medium sized runway and, at times, challenging weather patterns.

While I understand Australia is not high on the list of priorities, it is frustrating when you see global places in the middle of nowhere being released.

Cheers

Steve Young

Canberra 

 

How come no SODE for YSCB still?  and for the moment I haven't found any SODE file for YBSC intl gates. They are special.  It should be possible because Arlanda and ENVA use them.. 

Love the sceneries...

Thanks 

All the best

Jens


Jens Michlas
Frederiksberg, Copenhagen
Denmark


 

Share this post


Link to post

Auscene re-did Adelaide in mid 2020 for 64-bit P3D, it was last updated (to v2.2) in April 2021:  https://secure.simmarket.com/auscene-adelaide-international-x-v2-fsxp3dv2.phtml

A working noseloader jetway can be placed at YSCB gate 9 in GSX by carefully positioning the GSX ThyssenKrupp Two-tunnel NL 10/7 noseloader inside the Orbx model (and excluding the default IK jetway at gate 9 using the GSX Control Panel).  IRL the noseloader jetways were removed and replaced with more standard articulated moving jetways back in ~2012, so it would be nice to have something even quasi-current.

 

  • Like 2

Bob Scott | President and CEO, AVSIM Inc
ATP Gulfstream II-III-IV-V

System1 (P3Dv5/v4): i9-13900KS @ 6.0GHz, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090
Samsung 55" JS8500 4K TV@30Hz,
3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU, 1.2Gbps internet
Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro
PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box

Sys2 (MSFS/XPlane): i9-10900K @ 5.1GHz, 32GB 3600/15, nVidia RTX4090FE, Alienware AW3821DW 38" 21:9 GSync, EVGA 1000P2
Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, 2x TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case

Portable Sys3 (P3Dv4/FSX/DCS): i9-9900K @ 5.0 Ghz, Noctua NH-D15, 32GB 3200/16, EVGA RTX3090, Dell S2417DG 24" GSync
Corsair RM850x PSU, TM TCA Officer Pack, Saitek combat pedals, TM Warthog HOTAS, Coolermaster HAF XB case

Share this post


Link to post

I have the Auscene YPAD scenery and its working perfectly well in P3D v5.1.


Spoiler

System specs: MFG Crosswind pedals| ACE B747 yoke |Honeycomb Bravo throttle
Now built: P3Dv5.3HF2: Intel i5-12600K @4.8Ghz | MSI Z690-A PRO | Asus TUF Gaming RTX3070 OC 8Gb| 32Gb Corsair Vengeance LPX DDR4 3200Mhz |Samsung 980Evo Pro PCIe 500Gb | WD Black SN850 PCIe 2Tb | beQuiet 802 Tower Case|Corsair RM850 PSU | Acer Predator 34p 3440x1440p

Mark Aldridge
P3D v5.3 HF2, P3Dv4.5 and sometimes FSX!

Share this post


Link to post

+1 Canberra (I have the Orbx one...)


12400F - 32GB DDR4 - RTX4070 - 1440p G-Sync UltraWide - Sennheiser GSX 1000 - O11 Air Mini - 1TB NVMe + 2TB SSD - Windows 11 Pro - Prepar3D 5.4 and MSFS

Share this post


Link to post
17 hours ago, w6kd said:

Auscene re-did Adelaide in mid 2020 for 64-bit P3D, it was last updated (to v2.2) in April 2021:  https://secure.simmarket.com/auscene-adelaide-international-x-v2-fsxp3dv2.phtml

A working noseloader jetway can be placed at YSCB gate 9 in GSX by carefully positioning the GSX ThyssenKrupp Two-tunnel NL 10/7 noseloader inside the Orbx model (and excluding the default IK jetway at gate 9 using the GSX Control Panel).  IRL the noseloader jetways were removed and replaced with more standard articulated moving jetways back in ~2012, so it would be nice to have something even quasi-current.

 

That's smart...I will try this.. and thank your very much for your answer..

All the best

Jens


Jens Michlas
Frederiksberg, Copenhagen
Denmark


 

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...