January 13, 20206 yr G'day All First and foremost, apologies if this is the incorrect place to post this but couldn't find another place to post. This is a call for scenery developers to consider 64 bit scenery for the following major citys in Australia. I'm talking payware, not freeware. 1. Adelaide (YPAD) - last version released only good for 32 bit and out of date - no plans for a 64 bit release 2. Darwin (YPDN) - A joint civil/military aerodrome and a gateway to Asia making many destinations viable for those that enjoy smaller jets (737, A32x, etc) 3. Canberra (YSCB) - The nations capital. While ORBX has a 64 bit version, it is so far out of date it's not funny. ORBX has no plans to update it as the developer of this scenery has since left. No SODE available for any of the limited number of jetways 4. Hobart (YMHB) - Australias most southern capital city that has its own set of challenges with a medium sized runway and, at times, challenging weather patterns. While I understand Australia is not high on the list of priorities, it is frustrating when you see global places in the middle of nowhere being released. Cheers Steve Young Canberra P3Dv4 - PMDG 747 QOTS II, PMDG 737 NGX, Reboot, MT 6, MJC Q400, ORBX. FlyTampa, FS2Crew voice, Aivlasoft EFB + FSX Steam
January 13, 20206 yr What sim are needing this for? Thank you. Rick $Silver Donor EAA 1317610 I7-7700K @ 4.5ghz, MSI Z270 Gaming MB, 32gb 3200, Geforce RTX2080 Super O/C, 28" Samsung 4k Monitor, Various SSD, HD, and peripherals
January 13, 20206 yr Author I have P3Dv4 but I'm guessing X-Plane would be in the same boat. Cheers Steve P3Dv4 - PMDG 747 QOTS II, PMDG 737 NGX, Reboot, MT 6, MJC Q400, ORBX. FlyTampa, FS2Crew voice, Aivlasoft EFB + FSX Steam
September 28, 20214 yr On 1/13/2020 at 1:44 AM, youngie63 said: G'day All First and foremost, apologies if this is the incorrect place to post this but couldn't find another place to post. This is a call for scenery developers to consider 64 bit scenery for the following major citys in Australia. I'm talking payware, not freeware. 1. Adelaide (YPAD) - last version released only good for 32 bit and out of date - no plans for a 64 bit release 2. Darwin (YPDN) - A joint civil/military aerodrome and a gateway to Asia making many destinations viable for those that enjoy smaller jets (737, A32x, etc) 3. Canberra (YSCB) - The nations capital. While ORBX has a 64 bit version, it is so far out of date it's not funny. ORBX has no plans to update it as the developer of this scenery has since left. No SODE available for any of the limited number of jetways 4. Hobart (YMHB) - Australias most southern capital city that has its own set of challenges with a medium sized runway and, at times, challenging weather patterns. While I understand Australia is not high on the list of priorities, it is frustrating when you see global places in the middle of nowhere being released. Cheers Steve Young Canberra How come no SODE for YSCB still? and for the moment I haven't found any SODE file for YBSC intl gates. They are special. It should be possible because Arlanda and ENVA use them.. Love the sceneries... Thanks All the best Jens Jens MichlasFrederiksberg, Copenhagen Denmark
September 28, 20214 yr Auscene re-did Adelaide in mid 2020 for 64-bit P3D, it was last updated (to v2.2) in April 2021: https://secure.simmarket.com/auscene-adelaide-international-x-v2-fsxp3dv2.phtml A working noseloader jetway can be placed at YSCB gate 9 in GSX by carefully positioning the GSX ThyssenKrupp Two-tunnel NL 10/7 noseloader inside the Orbx model (and excluding the default IK jetway at gate 9 using the GSX Control Panel). IRL the noseloader jetways were removed and replaced with more standard articulated moving jetways back in ~2012, so it would be nice to have something even quasi-current. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
September 29, 20214 yr I have the Auscene YPAD scenery and its working perfectly well in P3D v5.1. SpoilerSystem specs: MFG Crosswind pedals| ACE B747 yoke |Honeycomb Bravo throttleNow built: P3Dv5.3HF2: Intel i5-12600K @4.8Ghz | MSI Z690-A PRO | Asus Dual RTX 4070 Super OC 12Gb| 32Gb Corsair Vengeance LPX DDR4 3200Mhz |Samsung 980Evo Pro PCIe 500Gb | WD Black SN850 PCIe 2Tb | WD SA510 4Tb |beQuiet 802 Tower Case|Corsair RM850 PSU | Acer Predator X34P 3440x1440pMark AldridgeMSFS2024 SU5 & P3D v5.3 HF2
September 29, 20214 yr +1 Canberra (I have the Orbx one...) 13600KF - AIO - 32GB DDR4 - RTX4070 - UW1440p GSync - USB DAC - 2TB NVMe - Windows 11 Pro - Gladiator NXT EVO - 1 Gbps Fiber - MSFS 2024
September 29, 20214 yr 17 hours ago, w6kd said: Auscene re-did Adelaide in mid 2020 for 64-bit P3D, it was last updated (to v2.2) in April 2021: https://secure.simmarket.com/auscene-adelaide-international-x-v2-fsxp3dv2.phtml A working noseloader jetway can be placed at YSCB gate 9 in GSX by carefully positioning the GSX ThyssenKrupp Two-tunnel NL 10/7 noseloader inside the Orbx model (and excluding the default IK jetway at gate 9 using the GSX Control Panel). IRL the noseloader jetways were removed and replaced with more standard articulated moving jetways back in ~2012, so it would be nice to have something even quasi-current. That's smart...I will try this.. and thank your very much for your answer.. All the best Jens Jens MichlasFrederiksberg, Copenhagen Denmark
Archived
This topic is now archived and is closed to further replies.