April 16, 20206 yr Hello everyone! Just wondering if anyone have a good merge for the iFly 744 with posky model. Thanks!
April 17, 20206 yr This my Flaps section. [flaps.0] type= 1 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=1.00 // degrees flaps-position.2=5.00 // degrees flaps-position.3=10.00 // degrees flaps-position.4=20.00 // degrees flaps-position.5=25.00 // degrees flaps-position.6=30.00 // degrees lift_scalar=0.00 drag_scalar=1.00 pitch_scalar=1.00 [flaps.1] type= 2 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 11.0 // seconds damaging-speed=250.0 // KIAS blowout-speed=300.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=1.00 // degrees lift_scalar=0.00 drag_scalar=0.00 pitch_scalar=0.00 [flaps.2] type= 2 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=0.70 // degrees flaps-position.2=3.50 // degrees flaps-position.3=7.00 // degrees flaps-position.4=10.00 // degrees flaps-position.5=12.00 // degrees flaps-position.6=18.00 // degrees lift_scalar=1.00 drag_scalar=0.00 pitch_scalar=0.00 My FS Videos
April 17, 20206 yr Author 49 minutes ago, edetroit said: This my Flaps section. [flaps.0] type= 1 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=1.00 // degrees flaps-position.2=5.00 // degrees flaps-position.3=10.00 // degrees flaps-position.4=20.00 // degrees flaps-position.5=25.00 // degrees flaps-position.6=30.00 // degrees lift_scalar=0.00 drag_scalar=1.00 pitch_scalar=1.00 [flaps.1] type= 2 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 11.0 // seconds damaging-speed=250.0 // KIAS blowout-speed=300.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=1.00 // degrees lift_scalar=0.00 drag_scalar=0.00 pitch_scalar=0.00 [flaps.2] type= 2 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=0.70 // degrees flaps-position.2=3.50 // degrees flaps-position.3=7.00 // degrees flaps-position.4=10.00 // degrees flaps-position.5=12.00 // degrees flaps-position.6=18.00 // degrees lift_scalar=1.00 drag_scalar=0.00 pitch_scalar=0.00 Same as me. But still having same problem...
April 17, 20206 yr Ah...the wayward right wing flap canoe. I cannot remember the reason why that happens. It does not happen on my IFLY/POSKY merge......but I cannot remember how I fixed it. You are using the IFLY airfile? My FS Videos
April 17, 20206 yr Author 11 minutes ago, edetroit said: Ah...the wayward right wing flap canoe. I cannot remember the reason why that happens. It does not happen on my IFLY/POSKY merge......but I cannot remember how I fixed it. You are using the IFLY airfile? Yes, Im using iFly744_RR/GE/PW... I can´t get it to work! 😢...Also I cant get the exterir lights to work...I copied poskyutil and posky debug and Vcockpit...but Im having those 2 problems... Thanks for your time Ed! Edited April 17, 20206 yr by juaness
April 17, 20206 yr 20 minutes ago, juaness said: Yes, Im using iFly744_RR/GE/PW... I can´t get it to work! 😢...Also I cant get the exterir lights to work...I copied poskyutil and posky debug and Vcockpit...but Im having those 2 problems... Thanks for your time Ed! I'm afraid IFly really buggered up the lighting. I think the only ones that work with default codes are the nav and landing lights .....so best to assign beacon/nav/strobes all to nav lights. This is why I make my own panels so I can do whatever I like. While I like the systems on the IFLY744 the best part of all is the FDE. It is really good IMO. My FS Videos
April 17, 20206 yr Author 2 minutes ago, edetroit said: I'm afraid IFly really buggered up the lighting. I think the only ones that work with default codes are the nav and landing lights .....so best to assign beacon/nav/strobes all to nav lights. This is why I make my own panels so I can do whatever I like. While I like the systems on the IFLY744 the best part of all is the FDE. It is really good IMO. You r genious making panels. I love FS9, and 2D... I’m 2D panel lover, that’s why I like your panels. Anyway it’s hard difficult to make those panel mods...I Added a Center post into de iFly 2D panel...that’s all I can do...😩 Thanks ed again, And I would appreciate if y can help me with flaps section!
April 17, 20206 yr 26 minutes ago, juaness said: Thanks ed again, And I would appreciate if y can help me with flaps section! One sec. I remember I had to do a system restore a while back and that has a nasty habit of erasing cfgs I have a new flaps section for you to try. My FS Videos
April 17, 20206 yr [flaps.0] type= 1 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=1.00 // degrees flaps-position.2=5.00 // degrees flaps-position.3=10.00 // degrees flaps-position.4=20.00 // degrees flaps-position.5=25.00 // degrees flaps-position.6=30.00 // degrees lift_scalar=0.00 drag_scalar=1.00 pitch_scalar=1.00 [flaps.1] type = 1 // 1 - tail, 2 - lead span-outboard = 0.2 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=1.00 // degrees flaps-position.2=5.00 // degrees flaps-position.3=10.00 // degrees flaps-position.4=20.00 // degrees flaps-position.5=25.00 // degrees flaps-position.6=30.00 // degrees lift_scalar = 0.0 drag_scalar = 0.0 pitch_scalar= 0.0 system_type = 1 [flaps.2] type = 2 system_type=1 // 1 - tail, 2 - lead span-outboard = 0.8 // 0.0 .. 1.0 extending-time = 12 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 10.0 // degrees flaps-position.2 = 20.0 // degrees flaps-position.3 = 20.0 // degrees flaps-position.4 = 20.0 // degrees flaps-position.5 = 20.0 // degrees flaps-position.6 = 20.0 lift_scalar=0.00 drag_scalar=0.00 pitch_scalar=0.00 [flaps.3] type= 2 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=0.70 // degrees flaps-position.2=3.50 // degrees flaps-position.3=7.00 // degrees flaps-position.4=10.00 // degrees flaps-position.5=12.00 // degrees flaps-position.6=18.00 // degrees lift_scalar=1.00 drag_scalar=0.00 pitch_scalar=0.00 My FS Videos
April 17, 20206 yr Author 1 hour ago, edetroit said: [flaps.0] type= 1 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=1.00 // degrees flaps-position.2=5.00 // degrees flaps-position.3=10.00 // degrees flaps-position.4=20.00 // degrees flaps-position.5=25.00 // degrees flaps-position.6=30.00 // degrees lift_scalar=0.00 drag_scalar=1.00 pitch_scalar=1.00 [flaps.1] type = 1 // 1 - tail, 2 - lead span-outboard = 0.2 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=1.00 // degrees flaps-position.2=5.00 // degrees flaps-position.3=10.00 // degrees flaps-position.4=20.00 // degrees flaps-position.5=25.00 // degrees flaps-position.6=30.00 // degrees lift_scalar = 0.0 drag_scalar = 0.0 pitch_scalar= 0.0 system_type = 1 [flaps.2] type = 2 system_type=1 // 1 - tail, 2 - lead span-outboard = 0.8 // 0.0 .. 1.0 extending-time = 12 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 10.0 // degrees flaps-position.2 = 20.0 // degrees flaps-position.3 = 20.0 // degrees flaps-position.4 = 20.0 // degrees flaps-position.5 = 20.0 // degrees flaps-position.6 = 20.0 lift_scalar=0.00 drag_scalar=0.00 pitch_scalar=0.00 [flaps.3] type= 2 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=0.70 // degrees flaps-position.2=3.50 // degrees flaps-position.3=7.00 // degrees flaps-position.4=10.00 // degrees flaps-position.5=12.00 // degrees flaps-position.6=18.00 // degrees lift_scalar=1.00 drag_scalar=0.00 pitch_scalar=0.00 MAGIC!!!!!! FINALLY!!! GOOD JOB!!!! THANKS! Now I will try to get lights! I only get LDG LIGHTS 😳
April 20, 20206 yr Author On 4/17/2020 at 9:11 PM, edetroit said: [flaps.0] type= 1 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=1.00 // degrees flaps-position.2=5.00 // degrees flaps-position.3=10.00 // degrees flaps-position.4=20.00 // degrees flaps-position.5=25.00 // degrees flaps-position.6=30.00 // degrees lift_scalar=0.00 drag_scalar=1.00 pitch_scalar=1.00 [flaps.1] type = 1 // 1 - tail, 2 - lead span-outboard = 0.2 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=1.00 // degrees flaps-position.2=5.00 // degrees flaps-position.3=10.00 // degrees flaps-position.4=20.00 // degrees flaps-position.5=25.00 // degrees flaps-position.6=30.00 // degrees lift_scalar = 0.0 drag_scalar = 0.0 pitch_scalar= 0.0 system_type = 1 [flaps.2] type = 2 system_type=1 // 1 - tail, 2 - lead span-outboard = 0.8 // 0.0 .. 1.0 extending-time = 12 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 10.0 // degrees flaps-position.2 = 20.0 // degrees flaps-position.3 = 20.0 // degrees flaps-position.4 = 20.0 // degrees flaps-position.5 = 20.0 // degrees flaps-position.6 = 20.0 lift_scalar=0.00 drag_scalar=0.00 pitch_scalar=0.00 [flaps.3] type= 2 // trailing edge system_type=1 // Hydraulic span-outboard= 0.800 // 0.0 .. 1.0 extending-time= 50.0 // seconds damaging-speed=200.0 // KIAS blowout-speed=250.0 // KIAS flaps-position.0=0.00 // degrees flaps-position.1=0.70 // degrees flaps-position.2=3.50 // degrees flaps-position.3=7.00 // degrees flaps-position.4=10.00 // degrees flaps-position.5=12.00 // degrees flaps-position.6=18.00 // degrees lift_scalar=1.00 drag_scalar=0.00 pitch_scalar=0.00 Ed, you use iFly flight dinamics or Posky? I think I got almost done, but some problems with trim...
April 21, 20206 yr IFLY of course. If you are talking about trim for takeoff the FMC will give you the setting. My FS Videos
April 21, 20206 yr Author 56 minutes ago, edetroit said: IFLY of course. If you are talking about trim for takeoff the FMC will give you the setting. I mean the term movement. When I try to set for take off, the white line disappear. Maybe could be the elevator_trim_effectiveness? thanks
Archived
This topic is now archived and is closed to further replies.