PA31T Cheyenne GTN750 Autopilot issue (resolved)

[AFR2815 1]

Hi,

I'm new on the PA31T Cheyenne from Carenado.

With the basic GPS from Carenado (GNS530 i think), the autopilot works fine with the NAV button.

It captures radials and gps direct.

But when i run the F1 installer for the GTN750 and configure it with the panel, the GTN750 appears and is fine in the VC

However, when i select a direct on the gps it just goes to the North heading 0. (following radials with the NAV1 works fine)

Do you know how to solve this ?

 

TY, Alex

[RXP 2,336]

Hi,

I've moved your post to the GTN FltSim forum as I believe this is the simulator you're asking this for?

 

[AFR2815 1]

16 minutes ago, RXP said:

Hi,

I've moved your post to the GTN FltSim forum as I believe this is the simulator you're asking this for?

 

I'm on Prepar3D

[RXP 2,336]

Can you post the content of the RXP log files? (see RXP User's Manual for file/path)

[fppilot 4,335]

17 hours ago, AFR2815 said:

However, when i select a direct on the gps it just goes to the North heading 0. (following radials with the NAV1 works fine)

 

Have you read the user manual (its available in your Windows Start menu under Reality XP) and checked the settings in the configuration menu?  The settings needed may and do vary by aircraft, so they may need to be set for each.

 

Edited May 12, 2020 by fppilot

[Bert Pieke 7,584]

17 hours ago, AFR2815 said:

 

However, when i select a direct on the gps it just goes to the North heading 0. (following radials with the NAV1 works fine)

 

Do you have latest release of the RXP GTN installed?

[AFR2815 1]

Here are the log files : 

20/05/12 12:11:03.027 01692 -    ] # rxpGTN.dll version 2.5.24.0
20/05/12 12:11:03.027 01692 INFO ] 
20/05/12 12:11:09.638 01692 WARN ] Autopilot not supported on this platform (vers: 5.0.24.34874)
 

 

20/05/12 12:10:25.154 04524 -    ] # rxpGTN_menu.dll version 2.5.24.0
20/05/12 12:10:25.160 04524 INFO ] edit panel: C:\Program Files\Lockheed Martin\Prepar3D v5\SimObjects\Airplanes\Carenado PA31T_Cheyenne_II_LITE\panel\panel.cfg
20/05/12 12:11:00.491 00856 INFO ] 
20/05/12 12:11:00.493 00856 INFO ] edit panel: C:\Program Files\Lockheed Martin\Prepar3D v5\SimObjects\Airplanes\Carenado PA31T_Cheyenne_II_LITE\panel\panel.cfg
 

 

20/05/12 12:11:07.546 01692 -    ] # rxpGtnSim64.dll version 2.5.24.0
20/05/12 12:11:07.545 01692 INFO ] 
20/05/12 12:11:10.014 11900 INFO ] GTN 750.1 - TRAINER 6623
20/05/12 12:11:13.821 11900 WARN ] GTN 750.1 process is running as-admin

[AFR2815 1]

2 hours ago, Bert Pieke said:

Do you have latest release of the RXP GTN installed?

I re-installed it on the V5 with the hotfix 1, that was a few days ago. So I think yes

[AFR2815 1]

To illustrate my issue.

When i put a direct on the gtn the aircraft goes north

 

And after it keep going and loses the nav

 

Here are my settings 

 

[RXP 2,336]

15 minutes ago, AFR2815 said:

# rxpGTN.dll version 2.5.24.0

20/05/12 12:11:09.638 01692 WARN ] Autopilot not supported on this platform (vers: 5.0.24.34874)

This says it all!

 

[AFR2815 1]

That worked thank you for the quick support !

Shame on me for not having checked the update..

 

Edited May 12, 2020 by AFR2815