No parking flow (Button Version)

[Alti 65]

Hello,

three minutes after landing the co says "three minutes".

So i park the plane on stand or gate.
I call "Lights and doors"
the Co calls back, i hear the info for the crew, the co set APU to on.

but then nothing after this are fine.

i switch off the engines, i switch off the anticollision lights. also off the seatbelt signs.
so i call the parking check and i get only "standbye" i can wait for more then hundred years,

the co did nothing more. only i hear "standbye" when i call the parking check.
FS2 Crew is broken at this stage. so i switch off the pumps manual, and go on.

i am using the last version. with 5.1

thomas

 

 

[byork 2,259]

Voice or Button control?  Which SOP?
 

[Alti 65]

Hello, sorry for late reply.

Button only SOP2. German Windows10 pro.

[byork 2,259]

Is Descent Mode active?  It needs to be. 

Do you have any hardware connected to the mixture control event in FS?  

Is the taxi light off?  It needs to be in order to initiate the pre-shutdown flow.

 

Please  take a 2nd look at the manual.

Cheers,

 

 

[Alti 65]

Hello, im using now the updated last version.

Descend mode:
I am going to the Descend mode, all normal:
Descend Checks, Altimeter setting, up to landing checklist, also the co begin the after landing flow,
Flaps up, APU on, ... All normal.

I retract the spoilers, i disable TCAS switch to off.

In my PMDG i did not use hardware to switch off Mixture setting. i am parking on Apron, set Parking brakes.
I call Lights and doors  3 minutes after landing. have taxilights OFF.

the FO switch on the APU-Power, i also press "Shift+CTRL-F1" to shutoff all Mixtures in sim.  and the all FO activity stops here.
The FO did not turn off the Pumps. and i can not go on with the parking checks.
so i must manualy override the "Parkingbrakes"-question  with the "down Arrow" in the FS2Crew menu, the the FO can continue 
the Parking checcklist.  other i here only "Standby".
Secure aircraft procedure run normal.

  

Edited December 8, 2020 by Alti
Edit: correct the autocorrecure...

[byork 2,259]

Why are you using SHIFT CTRL F1 to shutoff the fuel?

Why not just set the fuel levers below the throttle to cutoff?  Please try it that way.

Cheers,

[Joe L 62]

I experience the same issue every flight.  

I always ensure taxi light is off (don't want to blind the ground crew), and always have fuel levers cut off.  I do use hardware for fuel cut off, but, levers are in down position in sim.

[byork 2,259]

1 hour ago, Joe L said:

I experience the same issue every flight.  

I always ensure taxi light is off (don't want to blind the ground crew), and always have fuel levers cut off.  I do use hardware for fuel cut off, but, levers are in down position in sim.

Are you following the manual to the letter?  Descent Mode active?

[byork 2,259]

Send me a Support Ticket at: www.fs2crew.com

I modified the conditions in Button Control for the shutdown checklist.

Cheers,

 

Edited December 9, 2020 by byork