November 13, 20205 yr I manually input a flightplan into my Reality XP GNS 530 and select activate. The plan shows in the 530 but the aircraft does not respond to it. The GPS button is activated. Am using P3D 5.1 and the aircraft is the Aerosoft Twin Otter extended. Any suggestions would be appreciated. Martin
November 13, 20205 yr 2 hours ago, Bigmarty said: I manually input a flightplan into my Reality XP GNS 530 and select activate. The plan shows in the 530 but the aircraft does not respond to it. The GPS button is activated. Am using P3D 5.1 and the aircraft is the Aerosoft Twin Otter extended. Which GPS button are you referring to? And what settings have you selected in the Configuration panel? (see page 5 of the User's Manual). The settings needed vary from aircraft to aircraft as not all aircraft model developers write to the same standard(s). Edited November 13, 20205 yr by fppilot Frank Patton Corsair 5000D Airflow Case; MSI B650 Tomahawk MOB; Ryzen 7 7800 X3D CPU; ASUS RTX 4080 Super; NZXT 360mm liquid cooler; Corsair Vengeance 64GB DDR5 4800 MHz RAM; RMX850X Gold PSU;; ASUS VG289 4K 27" Display; Honeycomb Alpha & Bravo, Crosswind 3's w/dampener. Former USAF meteorologist & ground weather school instructor. AOPA Member #07379126 "I will never put my name on a product that does not have in it the best that is in me." - John Deere
November 13, 20205 yr When you first power up the GNS gauge, stop on the Test page and verify that the HSI needles deflect correctly. It not, adjust the GNS settings as per the previous post. When you then want the GNS to steer the autopilot, make sure it is in GPS mode, not VLOC mode.. Bert
Archived
This topic is now archived and is closed to further replies.