July 17, 20214 yr Did a flight and when I tried to set the coarse I clicked on the Nav Source button and it did nothing. Could not switch from GPS to NAV1. After a while it did change. Also when I did an ILS approach, and switched over from GPS to NAV1 the plane didn't follow the approach. I was close to final, activated APP, went from GPS to NAV1, correct ILS freq was entered, Coarse was set and plane did not follow approach. Anyone else have this problem? Or any suggestions on why this is happening? Seems like I did everything right and everything was set. Thanks, Walt Walt Popowski
July 17, 20214 yr Are you using Darkfly's Longitude mod with WT G-3000 mod? I have no problem with them. System: I ASRock X670E | AMD 7800X3D | 64Gb DDR5 6000 | RTX 4090 | 2TB NVMe | Seasonic Vertex 1000W I LG Ultra Gear 34 UW I
July 17, 20214 yr Did you have Autopilot set to "On"? Processor: Intel i9-13900KF 5.8GHz 24-Core, Graphics Processor: Nvidia RTX 4090 24GB GDDR6, System Memory: 64GB High Performance DDR5 SDRAM 5600MHz, Operating System: Windows 11 Home Edition, Motherboard: Gigabyte Z790 Aorus Elite AX, LGA 1700, CPU Cooling: Corsair H100i Elite 240mm Liquid Cooling, RGB and LCD Display, Chassis Fans: Corsair Low Decibel, Addressable RGB Fans, Power Supply: Corsair HX1000i Fully Modular Ultra-Low-Noise Platinum ATX 1000 Watt, Primary Storage: 2TB Samsung Gen 4 NVMe SSD, Secondary Storage: 1TB Samsung Gen 4 NVMe SSD, VR Headset: Meta Quest 2, Primary Display: SONY 4K Bravia 75-inch, 2nd Display: SONY 4K Bravia 43-inch, 3rd Display: Vizio 28-inch, 1920x1080. Controller: Xbox Controller attached to PC via USB.
July 17, 20214 yr Author 4 hours ago, andyjohnston.net said: If I remember correctly, you don't need to switch to Nav1, it will catch anyways. Yes, Everything is set for the ISL, APP, NAV1,ILS Freq checked, CRS checked. this bad boy should be going in for a perfect landing. Yet, when I switch over to the VOR1, the plane decides to go sightseeing. Walt Popowski
July 17, 20214 yr Author 4 hours ago, andyjohnston.net said: If I remember correctly, you don't need to switch to Nav1, it will catch anyways. Really? That's interresting, because I did notice the glide slope showing up on the PFD while in GPS mode. I'll have to play with this. Thanks Walt Popowski
July 17, 20214 yr Author 4 hours ago, Ixoye said: Are you using Darkfly's Longitude mod with WT G-3000 mod? I have no problem with them. Yes I have the WT G-3000, and don'tthink I'm having a problem with that. Walt Popowski
July 17, 20214 yr Have you selected the correct nav source on the touch screen to your left? It's just below the pilot's side window. Mike Beckwith
July 17, 20214 yr Author 1 hour ago, Highmike said: Have you selected the correct nav source on the touch screen to your left? It's just below the pilot's side window. Yes, I am doing everything correctly. Have done many many ILS approaches before without any trouble. So can't figure out why I have this problem all of a sudden. Going to try another test flight now from KOXC to KBDL. Landing ILS Runway 33 108.55 Coarse 328. Lets see what happens. Walt Popowski
Archived
This topic is now archived and is closed to further replies.