Honeycomb Yoke Issue

[apexmaster37 0]

I just purchased and hooked up Honeycomb Alpha and Bravo Peripherals. Everything works as it should except my Ailerons. when game the yoke on the screen is at full left and ailerons are at full left.

I have done windows calibration and it is perfect. see images. really need to get this fixed. not sure if it is software or hardware issue?

https://photos.app.goo.gl/MrRC7rDTgXwZrLge8

[jaytee73 132]

35 minutes ago, apexmaster37 said:

I just purchased and hooked up Honeycomb Alpha and Bravo Peripherals. Everything works as it should except my Ailerons. when game the yoke on the screen is at full left and ailerons are at full left.

I have done windows calibration and it is perfect. see images. really need to get this fixed. not sure if it is software or hardware issue?

https://photos.app.goo.gl/MrRC7rDTgXwZrLge8

I note that you have changed your alpha default profile in 1 photo - and set the in reverse - try your alpha in default - and see what happens - if OK - your new profile is wrong

[SierraDelta 1,351]

45 minutes ago, apexmaster37 said:

really need to get this fixed. not sure if it is software or hardware issue?

Honeycomb now has an official support forum here on Avsim:

https://www.avsim.com/forums/forum/907-honeycomb-aeronautical/

[Dazzaboy 81]

3 hours ago, apexmaster37 said:

I just purchased and hooked up Honeycomb Alpha and Bravo Peripherals. Everything works as it should except my Ailerons. when game the yoke on the screen is at full left and ailerons are at full left.

I have done windows calibration and it is perfect. see images. really need to get this fixed. not sure if it is software or hardware issue?

https://photos.app.goo.gl/MrRC7rDTgXwZrLge8

When in yoke profile screen check sensitivities (upper left) . Make sure neutral is at zero . Your  settings in the photo are the same as mine , if you want the same sensitivity settings as me let me know . It works great for me . 

Edited February 18, 2022 by Dazzaboy
more info

[177B 730]

There is also the possibility you have something else bound to the axis. Even mouse or keyboard. 

Do a search under aileron and see if there are other bindings.

 

[David Roch 1,982]

Hello and welcome ;).
I don't believe your Honeycomb devices are faulty, and I suspect there is something wrong with the aircraft itself.
I suggest trying with a default plane and see.

[apexmaster37 0]

thank you for reply.

so yesterday i found my keyboard was binding to ailerons. so i removed all assigned from keyboard. and it was fine. this morning i went to fly and same thing. this time i comlpetely unplugged keyboard and still same issue. here is short clip of what it is doing

 

[Ixoye 1,832]

It looks as you still have something else bound to the axis.

[vgbaron 3,704]

You really should drop in on the official Honeycomb forum forum here, just to be sure.

https://www.avsim.com/forums/forum/908-alpha-flight-controls-support/

However I do think that you have conflicting binds.