September 14, 20223 yr After the GSX P3D gone wrong update fiasco I have been getting this elevation problems at Denver. Anyone has any suggestion? I am looking for a possible duplicate AFCAD on my system but I can't find one. Edited September 14, 20223 yr by Samaritano
September 14, 20223 yr I have no such problem at KDEN. I just know, the old versions of this airport don't work in P3D5. Maybe another KDEN interferes. The flightbeam manager has a troubleshooting tool. Maybe that solves your problem. OS=WIN11 Home, Sim=P3D5 5.3 (P3D4 and FSX for install reasons) Addons=ORBX, ASCA, AS, TOGA and tons of sceneries, aircraft MB=Gigabyte AORUS Z790 Elite AX, CPU=i13900K, Cooling=Be quiet! Pure Loop II FX GPU=KFA2 RTX3090 24 GB, RAM=64 GB DDR5-5600, HOTAS=Logitech G Saitek X52 Pro Visit my website for fixes and addons: https://sites.google.com/view/dans-p3d-mods
September 14, 20223 yr Author It was working fine. I did recently installed Orbx NC but after I run the Flightbeam troubleshooting tool it does not find anything to deactivate.
September 15, 20223 yr Author I uninstalled the scenery. Deleted any SODE and GSX file and re-installed it. On the installation it ask if you want to install a P3Dv4 or P3Dv5 version. After it runs flightbeam manager it found and update to version 3.05 I believe and had to do with P3D v5 elevation correction. It is all good now. Thank you.
September 15, 20223 yr 6 hours ago, Samaritano said: I uninstalled the scenery. Deleted any SODE and GSX file and re-installed it. On the installation it ask if you want to install a P3Dv4 or P3Dv5 version. After it runs flightbeam manager it found and update to version 3.05 I believe and had to do with P3D v5 elevation correction. It is all good now. Thank you. Glad to hear, you could solve it. That is always a good idea to reinstall, if you see others don't have the problem. SODE and GSX usually don't have elevation files, so that was not absolutely necessary. OS=WIN11 Home, Sim=P3D5 5.3 (P3D4 and FSX for install reasons) Addons=ORBX, ASCA, AS, TOGA and tons of sceneries, aircraft MB=Gigabyte AORUS Z790 Elite AX, CPU=i13900K, Cooling=Be quiet! Pure Loop II FX GPU=KFA2 RTX3090 24 GB, RAM=64 GB DDR5-5600, HOTAS=Logitech G Saitek X52 Pro Visit my website for fixes and addons: https://sites.google.com/view/dans-p3d-mods
October 1, 20223 yr On 9/15/2022 at 12:26 AM, Samaritano said: I uninstalled the scenery. Deleted any SODE and GSX file and re-installed it. On the installation it ask if you want to install a P3Dv4 or P3Dv5 version. After it runs flightbeam manager it found and update to version 3.05 I believe and had to do with P3D v5 elevation correction. It is all good now. Thank you. Hi, I seem to be on 3.04 and have the same elevation issue that you do. A reinstall only gave me the option to update to 3.04 but the changelog says the 3.05 fixes the elevation issue. Is there a specific way i can get updated to 3.05??
October 2, 20223 yr On 10/1/2022 at 1:29 AM, mister2509 said: Hi, I seem to be on 3.04 and have the same elevation issue that you do. A reinstall only gave me the option to update to 3.04 but the changelog says the 3.05 fixes the elevation issue. Is there a specific way i can get updated to 3.05?? You should be able to do the update via the Flightbeam Manager. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
October 2, 20223 yr Bob -- I just tried running the FB Manager and there isn't an update to 3.05. The lower right corner still says 3.04. Is there a way to force an update? Gigabyte x670 Aorus Elite AX MB; AMD 7800X3D CPU; Deepcool LT520 AIO Cooler; 64 Gb G.Skill Trident Z5 NEO DDR5 6000; Win11 Pro; P3D V5.4; 1 Samsung 990 2Tb NVMe SSD: 1 Crucial 4Tb MX500 SATA SSD; 1 Samsung 860 1Tb SSD; Gigabyte Aorus Extreme 1080ti 11Gb VRAM; Toshiba 43" LED TV @ 4k; Honeycomb Bravo.
October 3, 20223 yr 2 hours ago, pgde said: Bob -- I just tried running the FB Manager and there isn't an update to 3.05. The lower right corner still says 3.04. Is there a way to force an update? 3.04 is the latest I am aware of for FB KDEN--that version specifically addressed the elevation issues that were present in the original ADE file in P3Dv5. I think @mister2509 probably just recalled the version number incorrectly. Bob Scott | President and CEO, AVSIM Inc ATP Gulfstream II-III-IV-V Sys1 (MSFS20+24/XPlane12+11): AMD 9800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case Sys2 (P3Dv5/v4): i9-13900KS, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090 Samsung 55" JS8500 4K TV@60Hz, 3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box Sys3 (DCS/P3Dv4/ATS/ETS): AMD 7800X3D, MSI MPG X870E Carbon, Noctua NH-D15S, 64GB GSkill 6000/30, EVGA RTX3090 Alienware AW3420DW 34" 21:9 GSync, Corsair HX1000i PSU, 4TB Crucial T705 PCIe5 + 2TB Samsung 970Evo Plus, TM TCA Officer Pack, Saitek combat pedals, TM Warthog, TM RS300 FF wheel/pedals, Coolermaster HAF XB case
Archived
This topic is now archived and is closed to further replies.