October 11, 20223 yr Hi, As of late I am receiving this Error when I start RAAS in MSFS2020: https://www.flickr.com/photos/141330124@N05/shares/92qjvX6pnp I uninstalled / re-installed but the same issue. Thanks for help Juergen Mader Brgds Juergen Mader
October 12, 20223 yr Commercial Member You tried this: You need to reinstall RAAS, then go to the settings dialog and uncheck the "AUTO DETECT SCENERY CHANGES". Also send the following log contents: raas-data-proc.log and also FS2Crew RAASPRO Log.log located in: C:\Users\<username>\AppData\Roaming\FS2Crew MSFS RAASPRO Manuel Edited October 12, 20223 yr by Manuel82
October 12, 20223 yr Commercial Member Yes, we need the Log. You may have a bad airport or something in there. B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
October 12, 20223 yr Author Hi, Here are the log files: FS2CrewRAASPRO Log.log: 2022-10-12 05:51:09 - Attemting to connect to the Flight Simulator... 2022-10-12 05:51:09 - CONNECTED to the Flight Simulator! 2022-10-12 05:51:09 - The DLL has been LOADED SUCCESSFULLY! 2022-10-12 05:51:10 - WASM Module's Version: 1.0.0.1 2022-10-12 05:51:14 - Scanning MSFS scenery files... 2022-10-12 05:51:15 - Completed scanning MSFS scenery files! 2022-10-12 05:51:15 - ERROR! - The Runways CSV file does *NOT* exists! At this point, the program is not able to work properply!. raas-data-proc.log: 05:51:09 - START 05:51:09 - Path to app data: C:\Users\juerg\AppData\Roaming\FS2Crew MSFS RAASPRO\ 05:51:09 - Path to flightsim app data: C:\Users\juerg\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\ 05:51:09 - Steam version detected: 0 05:51:14 - Original 'Content.xml' file path: C:\Users\juerg\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Content.xml 05:51:14 - Cached 'Content.xml' file path: C:\Users\juerg\AppData\Roaming\FS2Crew MSFS RAASPRO\CachedContent.xml 05:51:14 - Original 'Content.xml' has changed 05:51:14 - Cached 'Content.xml' has been replaced 05:51:14 - Enumerating active packages... 05:51:14 - Searching UserCfg.opt for 'InstalledPackagesPath'... Path to offical packages: C:\Users\juerg\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\ Path to community packages: C:\Users\juerg\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Community\ 05:51:14 - Monitoring cached 'Content.xml' packages for changes... 05:51:14 - Rebuilding scenery information... 05:51:40 - END Brgds Juergen Mader
October 13, 20223 yr Commercial Member On 10/12/2022 at 5:02 AM, Juergen said: Hi, Here are the log files: FS2CrewRAASPRO Log.log: 2022-10-12 05:51:09 - Attemting to connect to the Flight Simulator... 2022-10-12 05:51:09 - CONNECTED to the Flight Simulator! 2022-10-12 05:51:09 - The DLL has been LOADED SUCCESSFULLY! 2022-10-12 05:51:10 - WASM Module's Version: 1.0.0.1 2022-10-12 05:51:14 - Scanning MSFS scenery files... 2022-10-12 05:51:15 - Completed scanning MSFS scenery files! 2022-10-12 05:51:15 - ERROR! - The Runways CSV file does *NOT* exists! At this point, the program is not able to work properply!. raas-data-proc.log: 05:51:09 - START 05:51:09 - Path to app data: C:\Users\juerg\AppData\Roaming\FS2Crew MSFS RAASPRO\ 05:51:09 - Path to flightsim app data: C:\Users\juerg\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\ 05:51:09 - Steam version detected: 0 05:51:14 - Original 'Content.xml' file path: C:\Users\juerg\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Content.xml 05:51:14 - Cached 'Content.xml' file path: C:\Users\juerg\AppData\Roaming\FS2Crew MSFS RAASPRO\CachedContent.xml 05:51:14 - Original 'Content.xml' has changed 05:51:14 - Cached 'Content.xml' has been replaced 05:51:14 - Enumerating active packages... 05:51:14 - Searching UserCfg.opt for 'InstalledPackagesPath'... Path to offical packages: C:\Users\juerg\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\ Path to community packages: C:\Users\juerg\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Community\ 05:51:14 - Monitoring cached 'Content.xml' packages for changes... 05:51:14 - Rebuilding scenery information... 05:51:40 - END Hi, Ok, I can clearly see that the scenery reader that scans your MSFS scenery failed, and as a result, the CSV file wasnt created. In my case, in my machine, the RAAS_runway_data.csv is created successfully, and the resulting log contents are as follows: The difference is in the raas-data-proc.log! FS2CrewRAASPRO Log.log: 2022-10-13 10:58:59 - Attemting to connect to the Flight Simulator... 2022-10-13 10:58:59 - CONNECTED to the Flight Simulator! 2022-10-13 10:58:59 - The DLL has been LOADED SUCCESSFULLY! 2022-10-13 10:58:59 - WASM Module's Version: 1.1.0.0 2022-10-13 10:59:03 - Deleting existing AppData files... 2022-10-13 10:59:03 - Scanning MSFS scenery files... 2022-10-13 10:59:29 - Completed scanning MSFS scenery files! 2022-10-13 10:59:29 - Reading runways data from the Runways CSV file... 2022-10-13 10:59:30 - Completed Runways CSV file reading process! 2022-10-13 10:59:30 - Reading CUSTOM airport data from the AIRPORTS directory... 2022-10-13 10:59:30 - Reading file: [C:\Users\<username>\AppData\Roaming\FS2Crew MSFS RAASPRO\Airports\EGLL.csv]... 2022-10-13 10:59:30 - Finished reading CUSTOM airport data! raas-data-proc.log: (Compare this log to yours, there seems, it didn't read any scenery area!) 10:59:03 - Rebuilding scenery information... Processing...Official\OneStore\vpilotdesigns-scenery-mpto\scenery Processing...Official\OneStore\microsoft-countryside-point-of-interest\scenery Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\microsoft-countryside-point-of-interest\scenery\microsoft\Countryside\branch1.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\microsoft-countryside-point-of-interest\scenery\microsoft\Countryside\branch2.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\microsoft-countryside-point-of-interest\scenery\microsoft\Countryside\branch3.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\microsoft-countryside-point-of-interest\scenery\microsoft\Countryside\CVX0001.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\microsoft-countryside-point-of-interest\scenery\microsoft\Countryside\CVX0002.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\microsoft-countryside-point-of-interest\scenery\microsoft\Countryside\CVX0003.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\microsoft-countryside-point-of-interest\scenery\microsoft\Countryside\master-shapes.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\microsoft-countryside-point-of-interest\scenery\microsoft\Countryside\master.bgl Processing...Official\OneStore\microsoft-airport-n15-kingston\scenery Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\microsoft-airport-n15-kingston\scenery\Microsoft\Kingston\master-shapes.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\microsoft-airport-n15-kingston\scenery\Microsoft\Kingston\master.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\microsoft-airport-n15-kingston\scenery\Microsoft\Kingston\modelLib.BGL Processing...Official\OneStore\asobo-airport-kxmr-cap-canaveral\scenery Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\asobo-airport-kxmr-cap-canaveral\scenery\KXMR.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\asobo-airport-kxmr-cap-canaveral\scenery\cap-canaveral\cap_canaveral.BGL Processing...Official\OneStore\asobo-airport-knfl-nas-fallon\scenery Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\asobo-airport-knfl-nas-fallon\scenery\Nas_Fallon\KNFL.bgl Processing...Official\OneStore\fs-base-genericairports\scenery ..... ..... Processing...Official\OneStore\asobo-airport-kord-chicago-ohare\scenery Processing...Official\OneStore\fs-base\scenery Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\fs-base\scenery\Base\scenery\lclookup.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\fs-base\scenery\Base\scenery\magdec.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\fs-base\scenery\Base\scenery\regions.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\fs-base\scenery\Base\scenery\seasons.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\fs-base\scenery\Base\scenery\worldlc.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\fs-base\scenery\Base\scenery\worldwc.bgl Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\fs-base\scenery\Global\Asobo_E3\Asobo_E3.BGL Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\fs-base\scenery\Global\Asobo_UI\Asobo_UI.BGL Processing bgl file: C:\Users\<username>\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\fs-base\scenery\world\TimeZone.bgl 10:59:27 - Airports found: 40847 10:59:45 - END As you can see, in my case the scanner reported the total number of airports read at the end of the scenery scanning process. Cheers, Manuel
October 14, 20223 yr Author Hi Manuel, I also can see that in the FS2CrewRAASPRO Log.log there is this error: - The Runways CSV file does *NOT* exists! At this point, the program is not able to work properly! However, I can't see why. What would be the recommended procedure to eliminate this error? Remove scenery from the community folder one by one? Thanks for help Brgds Juergen Mader
October 14, 20223 yr Commercial Member 6 hours ago, Juergen said: Hi Manuel, I also can see that in the FS2CrewRAASPRO Log.log there is this error: - The Runways CSV file does *NOT* exists! At this point, the program is not able to work properly! However, I can't see why. What would be the recommended procedure to eliminate this error? Remove scenery from the community folder one by one? Thanks for help To eliminate this error is to have the "RAAS_runway_data.csv" file in the: C:\Users\<username>\AppData\Roaming\FS2Crew MSFS RAASPRO This file comes by default there, after your install RAASPRO, in other words, there is a default file located there. This file contains most of the default (unencrypted) airport data that comes with MSFS. However, there is an option in RAASPRO settings window named "AUTO DETECT SCENERY CHANGES", which allows RAASPRO to rebuild/recreate the "RAAS_runway_data.csv" file, on every RAASPRO launch, basicly, it replaces the default file with a file built from your machine's installed MSFS airport data, by scanning the scenery. However, this process seems to fail, and the default file is deleted, as a result, you see the error. However, the best would be to scan your scenery and build a new file, because, the default will not have your add-on airport data installed on your machine. We already have the programmer that made the scenery scanner analyzing at your issue. But to keep the default file (which does NOT contains your add-on airports data) Run RAASPRO Open RAASPRO settings dialog, and uncheck the "AUTO DETECT SCENERY CHANGES" Close RAASPRO Reinstall RAASPRO And Relaunch it Check that the CSV file is still in: C:\Users\<username>\AppData\Roaming\FS2Crew MSFS RAASPRO Regards, Manuel
October 14, 20223 yr Commercial Member Can you send his "C:\Users\juerg\AppData\Roaming\FS2Crew MSFS RAASPRO\CachedContent.xml" file for review? "As of late I am receiving this Error...". Can you specify if you installed any new scenery as it seems to have worked before? What does "As of late" exactly mean? Manuel
October 14, 20223 yr Author Hi Manuel, I started RAAS in MSFS and I received the above error. So I used the settings menu and un-ticked the "Detect Scenery Changes Automatically". Exit MSFS, uninstall and re-install RAAS PRO ( I also checked that the RAAS_runway_data.csv did exist. Since I am using MSFS Addon Launcher, I deselected ALL sceneries. I than restarted MSFS, and launched RAAS PRO - it detected the Airport and runway. So I will enable one scenery and try RAAS to find where the problem occurs. Here the requested file: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <Priorities> <Package name="fs-base-nav" priority="1"/> <Package name="navigraph-navdata-base" priority="2"/> <Package name="navigraph-navdata" priority="3"/> </Priorities> I will be out of town for a week, but I will report back. Thanks for help Brgds Juergen Mader
October 19, 20223 yr Commercial Member We are still looking at this issue, we'll let u know any news about it. Cheers, Manuel
October 20, 20223 yr Commercial Member We identified an issue on our scenery scanner, We'll release an update soon. Cheers, Manuel
Archived
This topic is now archived and is closed to further replies.