Jump to content

Recommended Posts

Is there a Win10/64 utility or similar with which I can see the load of the processor

and the graphics card during the flight (P3Dv4.5)

Peter

Share this post


Link to post
Share on other sites

Task Manager will show you both.

cheers


Luke Kolin

I make simFDR, the most advanced flight data recorder for FSX, Prepar3D and X-Plane.

Share this post


Link to post
Share on other sites

And note that you need to watch the per-core CPU load, as the aggregated average CPU load percentage figure tells you next to nothing useful. 

My preferred way of doing this now is to use the free HWInfo64 program on both the sim PC and a second networked PC (e.g. a laptop) together, which allows you to monitor lots of parameters (temps, voltages, loading, etc) on the second PC outside the sim without disrupting the sim display.


Bob Scott | President and CEO, AVSIM Inc
ATP Gulfstream II-III-IV-V

System1 (P3Dv5/v4): i9-13900KS @ 6.0GHz, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090
Samsung 55" JS8500 4K TV@30Hz,
3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU, 1.2Gbps internet
Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro
PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box

Sys2 (MSFS/XPlane): i9-10900K @ 5.1GHz, 32GB 3600/15, nVidia RTX4090FE, Alienware AW3821DW 38" 21:9 GSync, EVGA 1000P2
Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, 2x TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case

Portable Sys3 (P3Dv4/FSX/DCS): i9-9900K @ 5.0 Ghz, Noctua NH-D15, 32GB 3200/16, EVGA RTX3090, Dell S2417DG 24" GSync
Corsair RM850x PSU, TM TCA Officer Pack, Saitek combat pedals, TM Warthog HOTAS, Coolermaster HAF XB case

Share this post


Link to post
Share on other sites

Thanks Bob,
my main focus is on the GraKa to see if it is running at its limit.
I think the TaskManager is sufficient for that.

Anyway, thanks
Peter

Share this post


Link to post
Share on other sites

MSI Afterburner,  combined with RTSS. You can display all the CPU/GPU parameters you may want. 

  • Upvote 1

Best regards,
Luis Hernández 20px-Flag_of_Colombia.svg.png20px-Flag_of_Argentina.svg.png

Main rig: self built, AMD Ryzen 5 5600X with PBO enabled (but default settings, CO -15 mV, and SMT ON), 2x16 GB DDR4-3200 RAM, Nvidia RTX3060 Ti 8GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), Viewsonic VX2458-MHD 1920x1080@120 Hz, Windows 10 Pro. Runing FSX-SE, MSFS and P3D v5.4 (with v4.5 default airports).

Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there... sometimes on just battery! FSX-SE also installed, just in case. 

VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/travel.

Share this post


Link to post
Share on other sites

I use OpenHardwareMonitor - same information, but Open Source...

Gérard

Share this post


Link to post
Share on other sites
7 hours ago, Luis Hernandez said:

MSI Afterburner,  combined with RTSS. You can display all the CPU/GPU parameters you may want. 

That’s what I use. Very helpful for both load and temps.


Ray (Cheshire, England).
System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke.
Cheadle Hulme Weather

Share this post


Link to post
Share on other sites

This works for me....   https://www.techpowerup.com/gpuz/  


Intel 10700K @ 5.1Ghz, Asus Hero Maximus motherboard, Noctua NH-U12A cooler, Corsair Vengeance Pro 32GB 3200 MHz RAM, RTX 2060 Super GPU, Cooler Master HAF 932 Tower, Thermaltake 1000W Toughpower PSU, Windows 10 Professional 64-Bit, 100TB of disk storage. Klaatu barada nickto.

Share this post


Link to post
Share on other sites
23 hours ago, Pitter said:

Thanks Bob,
my main focus is on the GraKa to see if it is running at its limit.
I think the TaskManager is sufficient for that.

Anyway, thanks
Peter

GraKa?  I'm going to guess this means the GPU?

There are a few GPU params worth watching beyond just the headline load percentage.  Specifically, I watch normalized total power (%), GPU Power (W), temp, and allocated GPU memory to give a more complete picture of how heavily the GPU is being tasked.  The load % only tells you the fraction of time the GPU's tensor cores are tasked...100% means the GPU is busy, but it doesn't necessarily indicate how heavy the workload is.  Power usage gives some insight into that as a factor in performance.  A number of the other solutions mentioned upthread will also give you the option of monitoring those params, but task manager does not.

  • Like 1
  • Upvote 1

Bob Scott | President and CEO, AVSIM Inc
ATP Gulfstream II-III-IV-V

System1 (P3Dv5/v4): i9-13900KS @ 6.0GHz, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090
Samsung 55" JS8500 4K TV@30Hz,
3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU, 1.2Gbps internet
Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro
PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box

Sys2 (MSFS/XPlane): i9-10900K @ 5.1GHz, 32GB 3600/15, nVidia RTX4090FE, Alienware AW3821DW 38" 21:9 GSync, EVGA 1000P2
Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, 2x TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case

Portable Sys3 (P3Dv4/FSX/DCS): i9-9900K @ 5.0 Ghz, Noctua NH-D15, 32GB 3200/16, EVGA RTX3090, Dell S2417DG 24" GSync
Corsair RM850x PSU, TM TCA Officer Pack, Saitek combat pedals, TM Warthog HOTAS, Coolermaster HAF XB case

Share this post


Link to post
Share on other sites
8 hours ago, Bob Scott said:

GraKa?  I'm going to guess this means the GPU?

Very possibly: OP is German, GraKa may mean Grafikkarte, which means precisely that.


Best regards,
Luis Hernández 20px-Flag_of_Colombia.svg.png20px-Flag_of_Argentina.svg.png

Main rig: self built, AMD Ryzen 5 5600X with PBO enabled (but default settings, CO -15 mV, and SMT ON), 2x16 GB DDR4-3200 RAM, Nvidia RTX3060 Ti 8GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), Viewsonic VX2458-MHD 1920x1080@120 Hz, Windows 10 Pro. Runing FSX-SE, MSFS and P3D v5.4 (with v4.5 default airports).

Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there... sometimes on just battery! FSX-SE also installed, just in case. 

VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/travel.

Share this post


Link to post
Share on other sites

Sorry, but you have correctly identified it. GraKa = GPU

Sorry again

Peter

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...