Hi Howard,

 

Can I ask where you purchased this from? I'm also in the UK, did you have any extra charges like import tax etc?

i need help

 

I recently purchased aviaServer –overhead panel for B737, and it seems activated but the Overhead panel seems to be working only 1 way, that is what ever the input i make in the MSF simulator is reflecting in the OH panel but whatever the input i make in the OH panel is not reflecting in the MSFS. All my monitor runs on a single PC and My MSFS is the latest 40th anniversary edition. 

Hi Howard!

Still loving my 737 Overhead!! Thank you!!   @nipin did you add the required lines to your .ini file?   Are you using the correct snippet?

@Rocky_53 if you are interested I've spent around 12 hours already mapping the 777 Overhead to the 737 Overhead.  Not sure if you purchased the 77 but if you did and would like to get the OH working let me know...  There are some nuances of course but I've managed to get the following configured and working!   I learned a TON yesterday trying to do this on my own 🙂   OI4FS will have an Opencockpits driver for my MCP, Dual EFIS, Dual Com and ATC panel on 7/1 and I will have the same HW support for the 777 as the 737!   Awesome!!!

Lights (all)
Engine Start Valves
Wipers
Fuel valves
Packs
Window Heat
Wing and Engine Anti Ice
External power connections
ADIRU
Thrust Asym
Cabin/Utility
IFE/Passenger
Seat Belt switch
Emergency lights with guard switch
Battery
Primary Hydraulics

OnDemand C1/C2 

APU start although it is using a weird brake rotor var to work.

Bus Tie Switches,

Battery Switch  

Edited June 28, 20241 yr by psolk

On 10/21/2023 at 10:35 AM, Andayle said:

Hi Howard,

 

Can I ask where you purchased this from? I'm also in the UK, did you have any extra charges like import tax etc?

Hi Dean, many apologies, but I've only just seen your post! I guess by now you have already purchased a unit, if not, I purcahsed it from VRinsight direct. Yes, I did have to pay duties. The whole OH with taxes cost me £1200

 

On 1/11/2024 at 6:41 PM, nipin said:

i need help

 

I recently purchased aviaServer –overhead panel for B737, and it seems activated but the Overhead panel seems to be working only 1 way, that is what ever the input i make in the MSF simulator is reflecting in the OH panel but whatever the input i make in the OH panel is not reflecting in the MSFS. All my monitor runs on a single PC and My MSFS is the latest 40th anniversary edition. 

Blimey, I did have that software for a while, but unsure what the issue could be...

 

4 hours ago, psolk said:

Hi Howard!

Still loving my 737 Overhead!! Thank you!!   @nipin did you add the required lines to your .ini file?   Are you using the correct snippet?

@Rocky_53 if you are interested I've spent around 12 hours already mapping the 777 Overhead to the 737 Overhead.  Not sure if you purchased the 77 but if you did and would like to get the OH working let me know...  There are some nuances of course but I've managed to get the following configured and working!   I learned a TON yesterday trying to do this on my own 🙂   OI4FS will have an Opencockpits driver for my MCP, Dual EFIS, Dual Com and ATC panel on 7/1 and I will have the same HW support for the 777 as the 737!   Awesome!!!

Lights (all)
Engine Start Valves
Wipers
Fuel valves
Packs
Window Heat
Wing and Engine Anti Ice
External power connections
ADIRU
Thrust Asym
Cabin/Utility
IFE/Passenger
Seat Belt switch
Emergency lights with guard switch
Battery
Primary Hydraulics

OnDemand C1/C2 

APU start although it is using a weird brake rotor var to work.

Bus Tie Switches,

Battery Switch  

Hiya Paul, great to know all is well with the unit. Sure, as far as I know I am using the correct snippet... it all seems to work OK. I don't remember having to add any lines to an ini file. Great to think you got the 777 OH working. I did wonder about buying it, but will wait a while. I'll bare in mind your kind offer of help, much appreciated. 

I am using the VRInsight M. Panel, which works OK with Asobo default aircrafts, but I wish to have it working at PDMG Boeings, is there a way to do it ? Thanks

11 hours ago, solito said:

I am using the VRInsight M. Panel, which works OK with Asobo default aircrafts, but I wish to have it working at PDMG Boeings, is there a way to do it ? Thanks

Hiya, I am unsure. The OH panel has been made to work with MSFS by someone releasing a snippet (profile) with the paid version of SPAD. There may be a SPAD version available for the M panel. I would suggest you investigate the SPAD forum/discord. 

11 hours ago, solito said:

I am using the VRInsight M. Panel, which works OK with Asobo default aircrafts, but I wish to have it working at PDMG Boeings, is there a way to do it ? Thanks

Hiya, I am unsure. The OH panel has been made to work with MSFS by someone releasing a snippet (profile) with the paid version of SPAD. There may be a SPAD version available for the M panel. I would suggest you investigate the SPAD forum/discord. Having said that, the M panel is aimned at GA flying, so only offering basic options. Of course the PMDG line of aircraft are completely different. I would  suggest you take a look at the Winwing MCP unit which is in the process of being released. It would give you a far more realistic simulation experience and be a lot less heartache for you. 😉

Edited June 30, 20241 yr by Rocky_53