1 hour ago, psolk said:

Wow, I had to google Skalarki but that's some impressive gear.  I have nothing to add other than that LOL.  

Actually, I have a link for you 🙂 

https://docs.spadnext.com/hardware-specific/skalarki

Yeah, I have the same set up as Regis9.  Totally makes the simulation much more immersive.  I have the MCDU/FCU along with the Throttletek flightbox and FSProjects Stick.  Once I can get their stuff working in 2024, I might look into the desktop overhead panel from Skalarki.  I just need to make sure I can get this allup and running in 2024 first.  

What is Spad for?  

Just to Clarify do a fresh install of the Skalarki Driver Software and this will ensure all your drivers are updated.

After the install you will see a file called "SKALARKIe_MSFSBridge"

Make a Copy of this file into your MSFS 2024 Community Folder.

Make sure in the Skalarki Profiler that you have Selected the Fenix A320.

Also make sure you have the latest version of FSUIPC7.

After you start MSFS 2024 start FSUIPC by opening the FSUPIC.EXe file. (Unlike MSFS 2000, the current version of FSUIPC does not auto launch in MSFS 2024).

When you get in the FENIX and power up, the Skalarki Harware will power up and connect.........

I hope this makes sense.........it worked for me !!

 

5 hours ago, martin5042 said:

Just to Clarify do a fresh install of the Skalarki Driver Software and this will ensure all your drivers are updated.

After the install you will see a file called "SKALARKIe_MSFSBridge"

Make a Copy of this file into your MSFS 2024 Community Folder.

Make sure in the Skalarki Profiler that you have Selected the Fenix A320.

Also make sure you have the latest version of FSUIPC7.

After you start MSFS 2024 start FSUIPC by opening the FSUPIC.EXe file. (Unlike MSFS 2000, the current version of FSUIPC does not auto launch in MSFS 2024).

When you get in the FENIX and power up, the Skalarki Harware will power up and connect.........

I hope this makes sense.........it worked for me !!

 

Thanks for this.... I am making some progress and don't get the errors.  However, now what happens is when I get in the sim, all of the FCU lights and lights on the MCDU just blink at random.  Turning the dials and switches on the hardware work in the plane, but they don't stop flashing on the hardware.  I got the latest FSUIPC7 today so that should be up to speed

I have just downloaded the newest SkalarkiProfiler version using the update function in the tool.

This new version 5.1.907.1000 offers access to the Skalarki components in both Sim versions, 2020 and 2024.

After a quick test with the Fenix A320 it works for my desktop line devices in MSFS 2024 (FCU, ABRK, MCDU, Mini-Ovhd).

 

Edited December 20, 20241 yr by procyon

20 minutes ago, procyon said:

I have just downloaded the newest SkalarkiProfiler version using the update function in the tool.

This new version 5.1.907.1000 offers access to the Skalarki components in both Sim versions, 2020 and 2024.

After I quick test with the Fenix A320 it works for my desktop line devices in MSFS 2024 (FCU, ABRK, MCDU, Mini-Ovhd).

 

Yeah, I downloaded that today.  It powers on for me still but every knob turn or keypress is double.  Do you have it set to desktop line or homeline in the Profiler settings?

Side note, how do you like the overhead panel?  Once I can figure out how to get the profiler to work, I am going to get one.  

I run it in Desktop-Line mode without an issue.

However, I copied the updated MSFSBridge community folder from the MSFS2020 community to MSFS2024 community manually.

Not sure if this is really required, but maybe you give it a try.

Otherwise all good. 🙂

The new device looks great and it's a nice enhancement, supporting immersion. 

35 minutes ago, procyon said:

I run it in Desktop-Line mode without an issue.

However, I copied the updated MSFSBridge community folder from the MSFS2020 community to MSFS2024 community manually.

Not sure if this is really required, but maybe you give it a try.

Otherwise all good. 🙂

The new device looks great and it's a nice enhancement, supporting immersion. 

I'll try that.  What about Prosim?  Did you check that on or off during install?

Still no luck here but thought I would mention a few other things I might not have mentioned previously that I just noticed

 In the Skalarki Profiler, where it says "Simulation", I have it red and it says not connected.  Everything else is connected.  At the top it is also showing "2 clients connected".  On my hardware, I get power and things seem to function other than buttons when pressed on my FCU or MCDU, turn on and turn off.  And my nobs double the amounts.  I know I mentioned the results before but I don't think I mentioned the "not connected" part or the 2 clients.  Any ideas?  Everything seems correct in my folders .  Could I have missed a step in the install somehow?  Should't all be green and "connected"?  Do I need to do anything in FSUIPC to get it working?  

Did you have any luck with Skalarki support?  I didn’t have to do anything in FSUIPC to get things working.

For the knobs being double the amount I had that once and it was because I had the wrong FCU type selected in the profiler (I recall I had HomeLine selected instead of DeskTopLine).

28 minutes ago, regis9 said:

Did you have any luck with Skalarki support?  I didn’t have to do anything in FSUIPC to get things working.

For the knobs being double the amount I had that once and it was because I had the wrong FCU type selected in the profiler (I recall I had HomeLine selected instead of DeskTopLine).

They attempted to help me (and will help again after the holidays when they are back) but we didn't get very far.  One odd thing (to me at least) was that I have DesktopLine and had that selected in the Profiler and they told me I should switch to Homeline.  Maybe I can try going back to Desktop.  Do you recall doing anything out of the ordinary when installing other than running the installer and following the steps?  I suppose i could have not done something.  I had DeFlight on my PC but completely (i am 95% sure) removed it so i can't think what else can be causing the issues that I have.  I am sure I will get it resolved eventually but I want to get the overhead and don't want to do that until I am certain it will work correctly!  I am stumped!!

There were a few steps, here's a copy and paste of the email they sent me.  I also didn't have the latest version of all of the files needed another time I was having Fenix connection issues so that could be something else to double check (it's not always obvious - at least to me - when there's a new version available).  Note that the versions specifically referenced below would be old as this exchange happened in May/24:

To install this update, please follow guide below:

 

At the beginning please shut down MSFS and Profiler (make sure you also close SKALARKIe_Interface app).

Then go to your MSFS Community folder and check if anything from Skalarki is installed there, if so, please delete it.

Then download and extract:  12042024SKALARKIe_MSFSBridge.zip

And place SKALARKIe_MSFSBridge folder int the community folder.

 

Second thing to do is replacing files in SkalarkiIO Profiler\MSFS2020 location (probably C:\Program Files (x86)\SkalarkiIO Profiler 5.1\MSFS2020)

Please remove all files present in the MSFS2020 subfolder, and replace them by the files extracted from: 02052024SKALARKIe_MSFSInterface.zip

 

12 hours ago, regis9 said:

There were a few steps, here's a copy and paste of the email they sent me.  I also didn't have the latest version of all of the files needed another time I was having Fenix connection issues so that could be something else to double check (it's not always obvious - at least to me - when there's a new version available).  Note that the versions specifically referenced below would be old as this exchange happened in May/24:

To install this update, please follow guide below:

 

At the beginning please shut down MSFS and Profiler (make sure you also close SKALARKIe_Interface app).

Then go to your MSFS Community folder and check if anything from Skalarki is installed there, if so, please delete it.

Then download and extract:  12042024SKALARKIe_MSFSBridge.zip

And place SKALARKIe_MSFSBridge folder int the community folder.

 

Second thing to do is replacing files in SkalarkiIO Profiler\MSFS2020 location (probably C:\Program Files (x86)\SkalarkiIO Profiler 5.1\MSFS2020)

Please remove all files present in the MSFS2020 subfolder, and replace them by the files extracted from: 02052024SKALARKIe_MSFSInterface.zip

 

Thanks.  I never did the second thing.  I'll give that a try!

12 hours ago, regis9 said:

There were a few steps, here's a copy and paste of the email they sent me.  I also didn't have the latest version of all of the files needed another time I was having Fenix connection issues so that could be something else to double check (it's not always obvious - at least to me - when there's a new version available).  Note that the versions specifically referenced below would be old as this exchange happened in May/24:

To install this update, please follow guide below:

 

At the beginning please shut down MSFS and Profiler (make sure you also close SKALARKIe_Interface app).

Then go to your MSFS Community folder and check if anything from Skalarki is installed there, if so, please delete it.

Then download and extract:  12042024SKALARKIe_MSFSBridge.zip

And place SKALARKIe_MSFSBridge folder int the community folder.

 

Second thing to do is replacing files in SkalarkiIO Profiler\MSFS2020 location (probably C:\Program Files (x86)\SkalarkiIO Profiler 5.1\MSFS2020)

Please remove all files present in the MSFS2020 subfolder, and replace them by the files extracted from: 02052024SKALARKIe_MSFSInterface.zip

 

I forgot to ask (maybe you told me but I forgot), are you pointing to the 2024 community folder during the install or are you pointing it to the 2020 and copying that over to the 2024 community folder?

12 hours ago, regis9 said:

There were a few steps, here's a copy and paste of the email they sent me.  I also didn't have the latest version of all of the files needed another time I was having Fenix connection issues so that could be something else to double check (it's not always obvious - at least to me - when there's a new version available).  Note that the versions specifically referenced below would be old as this exchange happened in May/24:

To install this update, please follow guide below:

 

At the beginning please shut down MSFS and Profiler (make sure you also close SKALARKIe_Interface app).

Then go to your MSFS Community folder and check if anything from Skalarki is installed there, if so, please delete it.

Then download and extract:  12042024SKALARKIe_MSFSBridge.zip

And place SKALARKIe_MSFSBridge folder int the community folder.

 

Second thing to do is replacing files in SkalarkiIO Profiler\MSFS2020 location (probably C:\Program Files (x86)\SkalarkiIO Profiler 5.1\MSFS2020)

Please remove all files present in the MSFS2020 subfolder, and replace them by the files extracted from: 02052024SKALARKIe_MSFSInterface.zip

 

One more dumb question... Where do I find the files extracted from 02052024SKALARKIe_MSFSInterface.zip?

2 hours ago, Zimmerbz said:

I forgot to ask (maybe you told me but I forgot), are you pointing to the 2024 community folder during the install or are you pointing it to the 2020 and copying that over to the 2024 community folder?

I copied it over from my 2020 community folder.