December 1, 20241 yr Has anyone had success using Skalarki HW in 2024? I have the profiler downloaded and installed (pointed to my 2024 community folder) and it recognizes Fenix and the hardware I have in the profiler. However, when I try to connect via the MSFS Interface from Skalarki, I get this error - HRESULT: 0xC000014B. Can anyone point me in the right direction on what I am doing wrong? When I stop the SDK and go into settings in the Profiler, it says 2020 so that could be my issue. However, I have heard people say they have it running in 2024. Thanks! Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
December 1, 20241 yr Author I should mention i am using the desktop MCDU and FCU if that makes a difference. Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
December 1, 20241 yr I'll be able to provide info in a few weeks as I'm in process of reinstalling windows and 2022/2024. But I use a combo of profiler with spad.next and it works great. I'm not anticipating issues with 2024. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
December 1, 20241 yr Author 5 minutes ago, micstatic said: I'll be able to provide info in a few weeks as I'm in process of reinstalling windows and 2022/2024. But I use a combo of profiler with spad.next and it works great. I'm not anticipating issues with 2024. Do I need Spad.next? I am not sure what that is or what it does Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
December 1, 20241 yr Author What's also weird is that it will connect then disconnect immediately if I don't get that error too. Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
December 2, 20241 yr 6 hours ago, Zimmerbz said: Do I need Spad.next? I am not sure what that is or what it does Need no. But it’s a powerful program that allows you to repurpose your skalarki and other gear to use with other planes too. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
December 3, 20241 yr After manually activating FSUIPC 7 I was able to make the products work with the Fenix A321 in MSFS 2024. Just make sure you have a copy of the MSFS Skalarki file in you MSFS 2024 Community folder and the the drivers are updated... With respect to FSUIPC after you manually start it you will see confirmation in the Skalarki profiler that it is connected.......... hope this helps...............
December 3, 20241 yr Glad to hear it! VRAM issues are keeping me from flying complex airliners in FS24 but as soon as I can reunite my Skalarki gear with the Fenix I’ll be all in. Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
December 3, 20241 yr Author 3 hours ago, martin5042 said: After manually activating FSUIPC 7 I was able to make the products work with the Fenix A321 in MSFS 2024. Just make sure you have a copy of the MSFS Skalarki file in you MSFS 2024 Community folder and the the drivers are updated... With respect to FSUIPC after you manually start it you will see confirmation in the Skalarki profiler that it is connected.......... hope this helps............... When you say, "Just make sure you have a copy of the MSFS Skalarki file in you MSFS 2024 Community folder and the the drivers are updated", what file are you referring to and how can i ensure that my drivers are up to date? When I launch the Skalarki Profiler, it recognizes everything now but still can't get my FCU and MCU to light up. It says my FCU and MCDU are on but it doesn't turn on. What specifically do I need to do for FSUIPC as well? I didn't do anything with FSUIPC for 2024 but when I start it before the sim, I am able to somehow get it working. I know this because my landing rate monitor connects to 2024 now when FSUIPC is enabled. Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
December 4, 20241 yr What is the current Skalarki Interface / drivers version turn people are successfully using in 24? Skalarki has this annoying habit of not telling anyone when they’ve done an update… Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
December 4, 20241 yr Author 1 minute ago, regis9 said: What is the current Skalarki Interface / drivers version turn people are successfully using in 24? Skalarki has this annoying habit of not telling anyone when they’ve done an update… I am using SkalarkiIOProfiler519061000 but have not been able to get it working in 2024. Having said that, I have never been able to get it working via Skalarki software. I have been using DeFlight for some time but that isn't ready for 2024. Please have said they have been able to get the Desktop line working in 2024, but I have not been able. However, that might be a me thing as I always found the Skalarki software to be more difficult so there is a very good chance I did something wrong in the process. Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
December 4, 20241 yr Ok thanks, I’ll give it a go and see if my current version works. In terms of 2020, I had to get in touch with their support and there were a few steps they guided me through to get it up and running. If you don’t have the email address for their support person (Pawel) I’ll send it over in a message to you, they were very helpful in getting me away from having to use / pay for DE Flight. Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
December 4, 20241 yr Wow, I had to google Skalarki but that's some impressive gear. I have nothing to add other than that LOL. Actually, I have a link for you 🙂 https://docs.spadnext.com/hardware-specific/skalarki Have a Wonderful Day -Paul Solk
December 4, 20241 yr I love mine 😀 I have the FCU and MCDU…a full cockpit setup will be the first thing I buy after I win the lottery 😆 Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
December 4, 20241 yr Author 1 hour ago, regis9 said: Ok thanks, I’ll give it a go and see if my current version works. In terms of 2020, I had to get in touch with their support and there were a few steps they guided me through to get it up and running. If you don’t have the email address for their support person (Pawel) I’ll send it over in a message to you, they were very helpful in getting me away from having to use / pay for DE Flight. That would be great if you can send me the support email. Thanks! Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
Create an account or sign in to comment