FSC190

Don' worry about this, Andrew. I will test this with some friends in our flightsimulator club. I am very happy with LINDA 2.6 now :-) Ahh, just one thing. Is it possible to get the message back when saving 2D-Panel positions via STRG+ALT+Shift+F1 There was a green ribbon with the text, running from right to left. Also for STRG+ALT+Shift+F2 and STRG+ALT+Shift+F3 And thanks Andrew for doing a fantastic job here.

I'm sorry to say, but you really don't understand what I try to explain. To be clear, I don't have any Saitek-Software installed, just the driver OK? If I switch the mode button to another position this is not shown in LINDAs assignment page, the related number is not selected. If I push any other button, the number turns to black for the time the button is pushed and the row for this button is highlighted. OK? The mode 1 position is button number 9, mode 2 button number 10, mode 3 button number 11. And now I open the Systemcontrolpanel of windows, select Gamecontroller, Find Saitek Yoke, klick right, choose properties, And after several mouseclick I see the window you can see left on my picture. There you see the red glowing "Betriebsmodus" and on the right site of the picture the now highlighted number 9. Now the assignment works. It does not if I close the left window. Maybe another user with saitek yoke can test this.

Hi Andrew, that is clear, but LINDA does not receive what mode is selected on the yoke if the System Control Panel (left window in my picture) is not open. Sorry, it is a bit difficult for me to explain

Hi Andrew, that is exactly the switch I mean. If it works on your system, did you install the Saitek software? I only use the driver.

OK :-) Next item I use the Saitek YOKE witch has a mode switch. These three buttons (9, 10, 11) are only recognized if the system panel Gamecontroller (Properties ov saitek... )is open When closed, the mode switch isn't recognized as a button anymore, that is very strange, cause all other buttons work pretty well.

Hi Problem with the flashing part of the display seems to be gone since I restarted LINDA/FSX Problem in post#5 appears with every aircraft. Maybe the code is only useable for MCP2? Yes that works. Great!

Little Problem when saving any change in the NGX-Config. Always this is added at the buttom of the Config_MCP.lua DME1 = { ["A +"] = n/a , ["A ++"] = n/a , ["A -"] = n/a , ["A --"] = n/a , ["PRESS"] = n/a , } FRE1 = { ["A +"] = Default_RADIOS_plus , ["A ++"] = Default_RADIOS_plusfast , ["A -"] = Default_RADIOS_minus , ["A --"] = Default_RADIOS_minusfast , ["PRESS"] = Default_RADIOS_press , } This leads into a error displayed in the console. 2693965 *** LUA Error: ...dules\linda-cfg/aircrafts/PMDG 737NGX/config-mcp.lua:625: attempt to perform arithmetic on global 'n' (a table value)

Hi Andrew (was it you who speaks on the installation video?) Want to report my first impression of my old MCP1 Type and Linda 2.6 Beta 7. Installed it over Version 1.13, so I have not the PMDG 737NGX Module 3.2 but Version 2.0 Seems to be working very well, are there any aspects I can test that were problematic in Version 2.50? Maybe all problems I had were related to the PMDG-Module and not to the main program? OK just tested with PMDG 737NGS 3.2. Displays are in sync, only the part between SPD and HDG is problematic. Setting flaps displays Flapsposition very short like flashing and quickly changing with __ _ Same to transpondermode If I change alt, Flapspostion is displayed for about 1 sec.

Hi, just want to say everything is OK now, don't know what happened,

Hi, I just wonder why the GPS-Function (FSX) Zoom and Group-Page don't work with the A2A172, but with the A2A182. Can anyone confirm that? And if, is there a solution?

Thx and sorry Scotflieger, didn't know about that.

Could you please be so kind, to put all (!) updates to Version 2.0 to the top of the whole thread, into your orignial post? It is very uncomfortable to search the whole threat for new Versions. Guenseli does it, so you should be able to :-)

Hi, this is because the captain seat view is set in the camera.cfg found in %AppData%\Microsoft\FSX It is the normal virtual camera view you get with F9 on your keyboard. The FMC is a 2D-Subpanel which can not be coded in the aircraft.cfg. But you are free to add your own camera views by copying on section, paste it with a new header. You must alter the GUID entry, to get this to work. A free GUID generator could be found here: http://www.guidgenerator.com/online-guid-generator.aspx Generate this code with braces {} To get a deep view into this take a look here: http://msdn.microsoft.com/en-us/library/cc526984.aspx

Hi Günther, agree with Andy. Found a little bug I think. Nav/ GPS Switches are twisted. If you assign A2A GPSNav nav it switches to GPS and viceversa.

Oh great Günther just received my Cherokee and hopefully took a lock in here :-) Thx a lot

Hi Ilhan, You have got a PM from me.

Liverys exported by the OC livery manager are not compatible with the old version of 737NGX livery manager

Hi, it seems that livery exports made with the new livery manager coming with the operation center are not compatible with the old version coming with the 737NGX. Exports made with the old version can be installed with the new version but not vice versa. Is there any solution to that problem?

Hi, Majestics had updated their Q400, unfortunately some AP-Functions don't work anymore. AP VS don't work. HDG sel and Alt sel work with the default FSX function AP Panel HDG Hold and AP Panel Alt Hold. None of the Majestic AP funktion work for me.

These two birds always show the actual heading and alt on the display. They could not be sychronized. (This is, why I don't fly the levelD anymore :-)) )

Problem solved. I had to assign "FallbackInitVars" (FSX Default Funktion) to the On Release-Part of my Local Shift Button. Works now as expected.

Hi, so I will share my config :-) for the MCP1. It is (surely) diffrent from others here in this thread. One commend at the CRS-Knob. The T7 doesn't have one and this funktion does not work for me, You have to type freq and crs in the Nav/Rad-page of the FMC. Unfortunatly Upload doesn't work here, so I place it in this post. Copy and paste it to your config-mcp.lua file inside the PMDG777 folder (under LINDA-CFG/AIRCRAFT) -- LINDA Config file for -- Generated by LINDA Configurator -- ############################################### -- -- ## EFIS block Mode 1 -- ############################################### -- -- EFIS block buttons and switches EFIS1 = { ["ENABLED"] = true , ["IDENT"] = "GPS" , ["FPV"] = PMDG_EFIS_fpv , ["MTR"] = PMDG_EFIS_mtrs , ["WX"] = PMDG_EFIS_wxr , ["STA"] = PMDG_EFIS_sta , ["WPT"] = PMDG_EFIS_wpt , ["ARPT"] = PMDG_EFIS_arpt , ["DATA"] = PMDG_EFIS_data , ["POS"] = PMDG_EFIS_pos , ["TERR"] = PMDG_EFIS_terr , ["ADF1"] = PMDG_VorAdf_L_dec , ["ADF2"] = PMDG_VorAdf_R_dec , ["VOR1"] = PMDG_VorAdf_L_inc , ["VOR2"] = PMDG_VorAdf_R_inc , } -- EFIS MINS knob MINS1 = { ["A SHOW"] = empty , ["A +"] = PMDG_Min_inc , ["A ++"] = PMDG_Min_inc , ["A -"] = PMDG_Min_dec , ["A --"] = PMDG_Min_dec , ["PRESS"] = PMDG_Min_RadBaro , ["B SHOW"] = empty , ["B +"] = EFIS_MINIMUMS_inc , ["B ++"] = EFIS_MINIMUMS_inc , ["B -"] = EFIS_MINIMUMS_dec , ["B --"] = EFIS_MINIMUMS_dec , } -- EFIS BARO knob BARO1 = { ["A SHOW"] = empty , ["A +"] = PMDG_EFIS_Baro_inc , ["A ++"] = PMDG_EFIS_Baro_inc , ["A -"] = PMDG_EFIS_Baro_dec , ["A --"] = PMDG_EFIS_Baro_dec , ["PRESS"] = PMDG_EFIS_Baro_std , ["B SHOW"] = empty , ["B +"] = empty , ["B ++"] = empty , ["B -"] = empty , ["B --"] = empty , } -- EFIS CTR knob CTR1 = { ["A SHOW"] = PMDG_EFIS_Mode_show , ["A +"] = PMDG_EFIS_Mode_inc , ["A ++"] = PMDG_EFIS_Mode_inc , ["A -"] = PMDG_EFIS_Mode_dec , ["A --"] = PMDG_EFIS_Mode_dec , ["PRESS"] = PMDG_EFIS_Mode_ctr , ["B SHOW"] = empty , ["B +"] = empty , ["B ++"] = empty , ["B -"] = empty , ["B --"] = empty , } -- EFIS TFC knob TFC1 = { ["A SHOW"] = PMDG_EFIS_Range_show , ["A +"] = PMDG_EFIS_Range_inc , ["A ++"] = PMDG_EFIS_Range_inc , ["A -"] = PMDG_EFIS_Range_dec , ["A --"] = PMDG_EFIS_Range_dec , ["PRESS"] = PMDG_EFIS_Range_Traffic , ["B SHOW"] = empty , ["B +"] = empty , ["B ++"] = empty , ["B -"] = empty , ["B --"] = empty , } -- ############################################### -- -- ## EFIS block Mode 2 -- ############################################### -- -- EFIS block buttons and switches EFIS2 = { ["ENABLED"] = true , ["IDENT"] = "EFB" , ["FPV"] = empty , ["MTR"] = empty , ["WX"] = RXP_WX500_POPUP_TOGGLE , ["STA"] = empty , ["WPT"] = empty , ["ARPT"] = empty , ["DATA"] = empty , ["POS"] = EFB_MOVING_MAP_toggle , ["TERR"] = EFB_COLOR_MODE_toggle , ["ADF1"] = empty , ["ADF2"] = empty , ["VOR1"] = empty , ["VOR2"] = empty , } -- EFIS MINS knob MINS2 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , ["B SHOW"] = empty , ["B +"] = empty , ["B ++"] = empty , ["B -"] = empty , ["B --"] = empty , } -- EFIS BARO knob BARO2 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , ["B SHOW"] = empty , ["B +"] = empty , ["B ++"] = empty , ["B -"] = empty , ["B --"] = empty , } -- EFIS CTR knob CTR2 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , ["B SHOW"] = empty , ["B +"] = empty , ["B ++"] = empty , ["B -"] = empty , ["B --"] = empty , } -- EFIS TFC knob TFC2 = { ["A SHOW"] = empty , ["A +"] = EFB_ZOOM_out , ["A ++"] = EFB_ZOOM_out , ["A -"] = EFB_ZOOM_in , ["A --"] = EFB_ZOOM_in , ["PRESS"] = empty , ["B SHOW"] = empty , ["B +"] = empty , ["B ++"] = empty , ["B -"] = empty , ["B --"] = empty , } -- ############################################### -- -- ## EFIS block Mode 3 -- ############################################### -- -- EFIS block buttons and switches EFIS3 = { ["ENABLED"] = false , ["IDENT"] = "WXR" , ["FPV"] = RXP_WX500_TRACK_L , ["MTR"] = RXP_WX500_TRACK_R , ["WX"] = RXP_WX500_POPUP_TOGGLE , ["STA"] = empty , ["WPT"] = empty , ["ARPT"] = empty , ["DATA"] = weather_OAT , ["POS"] = empty , ["TERR"] = empty , ["ADF1"] = RXP_WX500_SUBMODE_DN , ["ADF2"] = RXP_WX500_RANGE_DN , ["VOR1"] = RXP_WX500_SUBMODE_UP , ["VOR2"] = RXP_WX500_RANGE_UP , } -- EFIS MINS knob MINS3 = { ["A SHOW"] = empty , ["A +"] = RXP_WX500_BRT_INC , ["A ++"] = RXP_WX500_BRT_INC , ["A -"] = RXP_WX500_BRT_DEC , ["A --"] = RXP_WX500_BRT_DEC , ["PRESS"] = empty , ["B SHOW"] = empty , ["B +"] = empty , ["B ++"] = empty , ["B -"] = empty , ["B --"] = empty , } -- EFIS BARO knob BARO3 = { ["A SHOW"] = empty , ["A +"] = RXP_WX500_GAIN_INC , ["A ++"] = RXP_WX500_GAIN_INC , ["A -"] = RXP_WX500_GAIN_DEC , ["A --"] = RXP_WX500_GAIN_DEC , ["PRESS"] = empty , ["B SHOW"] = empty , ["B +"] = empty , ["B ++"] = empty , ["B -"] = empty , ["B --"] = empty , } -- EFIS CTR knob CTR3 = { ["A SHOW"] = empty , ["A +"] = RXP_WX500_MAIN_MODE_NEXT , ["A ++"] = RXP_WX500_MAIN_MODE_NEXT , ["A -"] = RXP_WX500_MAIN_MODE_PREV , ["A --"] = RXP_WX500_MAIN_MODE_PREV , ["PRESS"] = empty , ["B SHOW"] = empty , ["B +"] = empty , ["B ++"] = empty , ["B -"] = empty , ["B --"] = empty , } -- EFIS TFC knob TFC3 = { ["A SHOW"] = empty , ["A +"] = RXP_WX500_TILT_INC , ["A ++"] = RXP_WX500_TILT_INC , ["A -"] = RXP_WX500_TILT_DEC , ["A --"] = RXP_WX500_TILT_DEC , ["PRESS"] = RXP_WX500_TILT_ZERO , ["B SHOW"] = empty , ["B +"] = empty , ["B ++"] = empty , ["B -"] = empty , ["B --"] = empty , } -- ############################################### -- -- ## MCP block Mode 1 -- ############################################### -- -- MCP block buttons and switches MCP1 = { ["ENABLED"] = true , ["IDENT"] = "MCP1" , ["TOGA"] = PMDG_AP_TOGA , ["TOGN"] = PMDG_MasterWarn_Capt , ["N1"] = PMDG_CLB_CON , ["SPD"] = PMDG_AT , ["FLCH"] = PMDG_FLCH , ["HDGSEL"] = Autopilot_HDGSEL_hold , ["HDGHLD"] = PMDG_HDG_HOLD , ["ALTHLD"] = PMDG_ALT_HOLD , ["V/S FPA"] = PMDG_VS_FPA , ["APP"] = PMDG_APP , ["VNAV"] = PMDG_VNAV , ["LNAV"] = PMDG_LNAV , ["CMDA"] = PMDG_AP_L , ["CMDB"] = PMDG_AP_R , ["CMDC"] = PMDG_Toggle_Chkl_Stat , ["LOC"] = PMDG_LOC , ["CWSA"] = PMDG_Disp_dec , ["CWSB"] = PMDG_Disp_inc , ["A/T UP"] = PMDG_AP_both_AT_on , ["A/T DN"] = PMDG_AP_both_AT_off , ["F/D UP"] = PMDG_AP_both_FD_on , ["F/D DN"] = PMDG_AP_both_FD_off , ["MASTER UP"] = PMDG_AP_Disengage_Bar_on , ["MASTER DN"] = PMDG_AP_Disengage_Bar_off , } -- MCP CRS knob CRS1 = { ["A SHOW"] = CRS_show , ["A +"] = PMDG_AP_CRSL_inc , ["A ++"] = PMDG_AP_CRSL_incfast , ["A -"] = PMDG_AP_CRSL_dec , ["A --"] = PMDG_AP_CRSL_decfast , ["PRESS"] = PMDG_AP_CRS_LR_toggle , } -- MCP SPD knob SPD1 = { ["A SHOW"] = SPD_show , ["A +"] = PMDG_AP_SPD_inc , ["A ++"] = PMDG_AP_SPD_incfast , ["A -"] = PMDG_AP_SPD_dec , ["A --"] = PMDG_AP_SPD_decfast , ["PRESS"] = PMDG_Push_SPD , } -- MCP HDG knob HDG1 = { ["A SHOW"] = HDG_show , ["A +"] = PMDG_AP_HDG_inc , ["A ++"] = PMDG_AP_HDG_incfast , ["A -"] = PMDG_AP_HDG_dec , ["A --"] = PMDG_AP_HDG_decfast , ["PRESS"] = PMDG_Push_HDG , } -- MCP ALT knob ALT1 = { ["A SHOW"] = ALT_show , ["A +"] = PMDG_AP_ALT_inc , ["A ++"] = PMDG_AP_ALT_incfast , ["A -"] = PMDG_AP_ALT_dec , ["A --"] = PMDG_AP_ALT_decfast , ["PRESS"] = PMDG_Push_ALT , } -- MCP VVS knob VVS1 = { ["A SHOW"] = VVS_show , ["A +"] = PMDG_AP_VS_inc , ["A ++"] = PMDG_AP_VS_inc , ["A -"] = PMDG_AP_VS_dec , ["A --"] = PMDG_AP_VS_dec , ["PRESS"] = Autopilot_VSSEL_mode , } -- ############################################### -- -- ## MCP block Mode 2 -- ############################################### -- -- MCP block buttons and switches MCP2 = { ["ENABLED"] = true , ["IDENT"] = "MCP2" , ["TOGA"] = empty , ["TOGN"] = empty , ["N1"] = empty , ["SPD"] = empty , ["FLCH"] = empty , ["HDGSEL"] = empty , ["HDGHLD"] = empty , ["ALTHLD"] = empty , ["V/S FPA"] = empty , ["APP"] = empty , ["VNAV"] = empty , ["LNAV"] = empty , ["CMDA"] = empty , ["CMDB"] = empty , ["CMDC"] = empty , ["LOC"] = empty , ["CWSA"] = empty , ["CWSB"] = DSP_MODE_toggle , ["A/T UP"] = empty , ["A/T DN"] = empty , ["F/D UP"] = empty , ["F/D DN"] = empty , ["MASTER UP"] = empty , ["MASTER DN"] = empty , } -- MCP CRS knob CRS2 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , } -- MCP SPD knob SPD2 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , } -- MCP HDG knob HDG2 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , } -- MCP ALT knob ALT2 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , } -- MCP VVS knob VVS2 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , } -- ############################################### -- -- ## MCP block Mode 3 -- ############################################### -- -- MCP block buttons and switches MCP3 = { ["ENABLED"] = false , ["IDENT"] = "MCP3" , ["TOGA"] = empty , ["TOGN"] = empty , ["N1"] = empty , ["SPD"] = empty , ["FLCH"] = empty , ["HDGSEL"] = empty , ["HDGHLD"] = empty , ["ALTHLD"] = empty , ["V/S FPA"] = empty , ["APP"] = empty , ["VNAV"] = empty , ["LNAV"] = empty , ["CMDA"] = empty , ["CMDB"] = empty , ["CMDC"] = empty , ["LOC"] = empty , ["CWSA"] = empty , ["CWSB"] = DSP_MODE_toggle , ["A/T UP"] = empty , ["A/T DN"] = empty , ["F/D UP"] = empty , ["F/D DN"] = empty , ["MASTER UP"] = empty , ["MASTER DN"] = empty , } -- MCP CRS knob CRS3 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , } -- MCP SPD knob SPD3 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , } -- MCP HDG knob HDG3 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , } -- MCP ALT knob ALT3 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , } -- MCP VVS knob VVS3 = { ["A SHOW"] = empty , ["A +"] = empty , ["A ++"] = empty , ["A -"] = empty , ["A --"] = empty , ["PRESS"] = empty , } -- ############################################### -- -- ## USER block Mode 1 -- ############################################### -- -- USER block buttons and switches USER1 = { ["ENABLED"] = true , ["IDENT"] = "Lght" , ["0"] = PMDG_Autobrake_dec , ["1"] = PMDG_Autobrake_inc , ["2"] = PMDG_TCAS_dec , ["3"] = PMDG_TCAS_inc , ["4"] = PMDG_TCAS_test , ["5"] = VRI_EFIS_MODE_toggle , ["6"] = VRI_MCP_MODE_toggle , ["7"] = VRI_USER_MODE_toggle , } -- ############################################### -- -- ## USER block Mode 2 -- ############################################### -- -- USER block buttons and switches USER2 = { ["ENABLED"] = true , ["IDENT"] = "___" , ["0"] = PMDG_Disp_inc , ["1"] = PMDG_Disp_dec , ["2"] = empty , ["3"] = empty , ["4"] = empty , ["5"] = VRI_EFIS_MODE_toggle , ["6"] = VRI_MCP_MODE_toggle , ["7"] = VRI_USER_MODE_toggle , } -- ############################################### -- -- ## USER block Mode 3 -- ############################################### -- -- USER block buttons and switches USER3 = { ["ENABLED"] = true , ["IDENT"] = "Othr" , ["0"] = empty , ["1"] = empty , ["2"] = empty , ["3"] = empty , ["4"] = empty , ["5"] = VRI_EFIS_MODE_toggle , ["6"] = VRI_MCP_MODE_toggle , ["7"] = VRI_USER_MODE_toggle , } -- ############################################### -- -- ## RADIOS block Mode 1 -- ############################################### -- -- RADIOS block buttons and switches RADIOS = { ["COM1 Select"] = empty , ["COM2 Select"] = empty , ["COM1 Swap"] = empty , ["COM2 Swap"] = empty , ["COMs Mode"] = Radios_COM_AUDIO_toggle , ["NAV1 Select"] = empty , ["NAV2 Select"] = empty , ["NAV1 Swap"] = empty , ["NAV2 Swap"] = empty , ["NAVs Mode"] = Radios_NAV_AUDIO_toggle , ["ADF1 Select"] = empty , ["ADF2 Select"] = empty , ["ADFs Mode"] = Radios_ADF_AUDIO_toggle , ["DME1 Select"] = empty , ["DME2 Select"] = empty , ["DMEs Mode"] = Radios_DME_AUDIO_toggle , ["XPND Select"] = empty , ["XPND Swap"] = empty , ["XPND Mode"] = Transponder_MODE_toggle , }

Thx for the reply Günther, Standing by for Update :-)

Hallo Micha, du unterliegst da einem Denkfehler. Es ist egal, ob du einen Joystickbutton oder eine Taste im VR Combo belegst. Erst mal müssen die richtigen Variablen gefunden und der nötige Lua-Befehl geschrieben werden.

Hallo Günter, ich hätte da gern mal ein Problem, Die Local Shift Funktion schaltet meine Joystickzuordnungen permanent auf Shifted, Erst ein Reload Lua engine bringt die normalen Einstellungen zurück. Gleiches trifft auch auf die Global Shift zu. Habe unter "On Press" für einen Joystickbutton Local Shift zugeordnet (müsste das nicht schon unter On Repeat gehören?) Dann Haken bei shifted gesetzt und die Zweitfunktion den Buttons zugeordnet. Verwende LINDA 1.13 LG Roland Sorry for asking in german, but my english isn't very well.