flightsimmer747

Also maybe my spawn in ut2 should be set further away.

My traffic program is Ut2 and im using rex weather.

I keep landing with a tailwind while other aircraft are taxing to the opposite side to get ready for takeoff?

It does help thanks for that.Basically i'm right, that phase is silenced becuase you as my atc program dont know which sid i filed. Understandably thats the limitation of the program. By all means its a great program but its sort of like the silence of ground traffic. You know im there but dont care how i get to the gate. no traffic advisories and no taxi info. Same as the sid, fly to the checkpoint after takeoff no matter how i get there. Where is this option for call flex sid, maybe i haven't explored it further and dont have the latest build?

Hey all There probably is a logical explanation to this on but ive done research to no avail. I think RC is a fantastic product but i sem to need a few answeres on a few things.Tutorial flights were good but my issue lies deeper then that.Understandibly fs atc is horrible when it comes to real life planning and executing a real plan in regards to departing and arriving an airport with atc guidance. I understand RC lifts alot of the quirks of fs but one thing i found odd, was after all the research i did to find a realistic flight plan and creating the plan along with the plates, i realized importing this into my FMC was no sweat. But in regards to telling fs where im going via radar contact i found it rather odd my sid and stars were non existent. Now i know i get to fly my approach but i thought RC would guide or assist me as in real life. I know the default atc and planner would never do this for me as they throw me all over the place, but RC is basically silenced throughout the sid and star phase, WHAT ABOUT TRAFFIC? I like the fact i can fly my star and sid or not and be vectored in, but RC is technically not matching up as to what the manual says. Ive read that it says rc wants to know where your going and will when you file a flight plan, but theoretically it doesn't matter what star or sid i fly until the checkpoint about 30 miles out (vor for example). Is this supposed to be like this or am i doing something wrong by not seeing my sid star in the radar contact screen when importing my plan? Isn't the fmc and Rc supposed to match up, just as default atc should match with the flight plan being flown or gps?NOw the only other option i can think off is that winds may change and therefore another star will have to be flown or a decision on landing on a different runway by preferance due to traffic wx etc.... See its more simple when flying out on SID because atc needs me there within a certain amount of time since im climbing and i can follow my plate but on arrival if i chose the wrong entry point or runway changes due to wind im basically alone when drifting off my STAR atc wont tell me or care about my location until im really close to the aerodrome and ready for approach clearances to the runway! Technically thats what default atc did, it did not not care about real life procedures and bug me every time about directions and altitude. SO i see radar contact just being silent in those phases of flight, so i can work, but what about traffic!!!!!Please enlighten me if im off course here!Thanks

I havent lost my textures with a low setting bufferpool.Thanks for a great find.

When speaaking of black and white textures we are laso talking about loss of aircraft textures right?Whats the deal with this then, 0 or low for bufferpool setting?

So guys whats it gonna be for the bufferpool setting in win 7 there still isnt a clear setting some guy is trouble free at =0.?

Any way to use windows 7 PRO as win xp compatibilty?

Same here!HMmm their is 2 of us so far!

Are we all overclocked here or use multiple displays like the th2go, maybe it is isolated to certain people?

Hello,Im having problems with the vc in the 767 with fs2crew running 3 monitors th2go.I know its a known issue but is this the fix for it? Its not clear if this fixes it. Also i cant go to 2d panel first as i get a screen flicker problem due to the th2go.

helloI seem to always lose fs2crew sounds, starting from "fs2cree activated" I narrowed the problem down to every time i rebuild my fsx cfg i tend to lose sound. Now i dont remember what i did last time to get sound back but i have no sound. im guessing an uninstall and reinstall should work, but does that need to be done each time. I noticed i need to reset the keys too, but for sound is there a file or a reg check that needs to be done? Is any other parameter messed up in fsx or cfg because of this?Thanks

Can i do anything about it?

Dont worry its not a permanent fix i have had so many black screen issues with the sound hz lowered. I get it in the dawn to day textures.

Hey guys i tried to uninstall then remove by deleting the dll for xguage and clearing the cfg command, but still it appears in the intrument views as aguage and its a black boxed window if i select it. Anyway of getting rid of it?

Hi JimIts done purchased!!I installed 6.5 and it didnt work so i went with v6 and then asa, it seemed to install ok, i had bsod with 6.5 so not sure, win 7 didnt like it.It also crashed once can i simply reinstall with 6.5 off of my system or do i need to install v6 everytime?Btw was there alot of enhancements brought in with ASA? Only after i installed it, i read that 6.5 would work with fsx? Is this true?Also winds not consistent, im always showing 1 knot anywhere and the airport i tested shows another station in the x gauge compared to the wx station of the airport.I get some minor graphical issues with the mini windows in asa, when something overlaps.

Thanks Jim,Im installing the old active sky and not sure which one, i have so many including the builds.Im honestly lost!

HelloFew questions,1. haze layer cured as opposed to weird looking fsx?2.Overcast possible with no holes in the sky, if so how many cloud layers are recommended to achieve it?3.Fsuipc, do i need to buy the registered version for wind smoothing, or does ASA provide smooth winds?4. I hear alot of people say, "if setup correctly ASA will work" Are there default settings, is there a guide to setup for specific systems?5. Are pireps available on a guage or kneepad within fsx, or an outside of sim website or tool?6.Is there a interface to load before launching fsx as in the past with 6.5? Or can i just fly my plan without a hitch in telling asa where im going and the real weather will automatically appear?7. Lastly can I install all ASA files on my c drive, or does it have to be on my dedicated fsx drive? I see it can be networked with another computer but by having it on the same pc, what is the best way to install it for it to be smooth on the frames and simple and clean on my hard drive for easy access.ThanksIf it mattersI have an i7 920 @ 4.2 ghz3x2gb 1600 mhzGtx 285 with nhancerWin 7 64 bitFsx with a few add ons Lvld 767 fs2crewUT2

Guys im experiencing it with the lvl d 767 as well. All complex aircraft seem to be affected, i changed the sound setting down to 8000 hz with onboard sound. So far its better no texture loss. But i tried dawn, dusk has been my issue. So ill keep testing.Now ill add that i used drivers for my onboard sound, and maybe the generic win7 drivers were also the problem. IM not sure though. Im guessing everyone with this problem has windows 7 64 bit?As for why, it makes no sense at all. I tried xp compatibility and did not get the texture problem but im not sure if the sound was the fix or the compatibility mode or non of the above, ill try individually and a dusk into night flight.I hate this part of flight simming, its anoying to have to deal with this stuff and takes away from the hobby.EDIT:dx 10 preview has been off since the day i installed fsx.

I want to make sure it works with ut 2, as the planes are injected differently?

HelloI removed my soundmax driver and automatically win7 installed a driver for me now fs2crew only has no sound> Im able to use the panel but no speech is heard.

Disregard, i found it.

HelloI dont get a text as in fs9 to repair window is there a way in fsx?

Mybe ill dig up an old pci sound card. if that will do.