cgueiros

Excuses if I am posting on the wrong forum - after a long search. Successfully using ADE 1.67 in adding ILS to runways in FSX-SE using Windows 10 but a few large airports report an INTERNAL COMPILER ERROR # 2031 Failed Element Parse <Boundary Fences and #2032 XML Page Error!Element tree follows:... The menu recommendation is to UPDATE TO AT LEAST SP1A. The Microsoft site Flight Simulator X SDK SP1A will download this update but it will not execute impeding me this recommended update - notwitstanding compatibilities tries. Has anyone been through a similar problem and solved it and would be willing to share it with this enthusiastic ADE user? Thanks a million. Clarindo [email protected]

WS Meier: Thank you for your most valuable assistance. With such detailed and precise instructions I was able to download the purchased aircraft, which already has been successfully reinstalled. Best of luck and, again, my most sincere appreciation for your prompt help. Clarindo Gueiros

On 12/13/2014 I purchased from PMDG Simulations, LLC. the subject aircraft. I have printed the Order Code, Customer ID, Transaction ID and Authorization Code and the Activation Code. A professional reformatted my HD and now I need to reinstall the aircraft and, as an 88-year old customer, am having problem in finding out how to go about downloading the required installation file. My apologies if this is not the proper forum to request this kind of assistance but I have tried several other alternatives in contacting PMDG unsuccessfully. Any assistance will be most appreciated as the only alternative I am faced with seems to be to repurchase the aircraft. Thanks a lot. Clarindo Gueiros Rio de Janeiro - Brazil [email protected]

I must, again, thank both of you - Scandinavian13 and Mathew Tan. for the assistance received. The problem - at last - is solved. Following your recomendation about Administrative privileges, I have started FSX and now the PMDG Boeing 737 allows the flight plan to be saved. In the process I also learned about repairing an aircraft, instead of having to delete it and reinstall. In this case I did not attempt repairing as the Administrative option solved it. Have a good day.

Thanks a lot, Scandinavian13 and Mathew Tan. Will try your suggestions. The only one I did not understand (my inexperience on the subject) is how to repair the plane. And I have not sent a support ticket to PMDG, which should be the next item to pursue. Again, thanks to both of you.

A fight plan correctly developed and accepted with no discontinuity by PMDG will not be saved. The SAVE option is highlighted but from there on no further alternative is available as the EXC button will not respond. A couple of long-time users of PMDG 737-800 have tried to help, to no avail. Any information which could help me out will be most appreciated. Clarindo Rio de Janeiro - Brazil

Thank you very much, Bogga, for the prompt and conclusive reply. Your directions allowed me to redownload the aircraft file. In installing it I find that the options offered are Repair and Modify, meaning (I assume) that the aircraft program still resides somewhere in the Hard Disk. I will not bother you with any more questions. Now that I have the file it will be up to me to find out how to go about it. I will try to find the file, uninstall it and then reinstall using this new download. Will have to ask Sherlock Holmes to assist me in this endeavour. My appreciation for uyour valuable assistance. Clarindo Hi Bogga. Let me hasten to inform that my problem has been solved, thank to you. I used the Modify option and the program now loads OK. Once again, my appreciation. Clarindo

My excuses if the subject is not pertinent in this forum - I am needintg help to download PMDG 737NGX. Having purchased this aircraft from PMDG Simulations, LLC on 12/13/2014 (and I have all the order code, customer ID, order copy, transaction ID, authorization code, SKU description, delivery address - all in my name) my HD was formatted and I lost the downloaded product. Mostly due to my age (nearing 90) I am sure this is the difficulty in finding the right way or link to either Product Support, Customer Customer where I could download this product again. Could someone assist in orienting which way to go to obtain this download? Any help will be much appreciated. Clarindo Gueiros

If anyone uses the subject program I would appreciate help. Am almost sure I am following correct instructions for installation, but in assigning functions to keyboard the lua scripts of this program do not show in FSUIPC registered version menu for selections. Only defaultof FSX functions are listed. Wondering where I am erroneously trying to configure this very useful addon for FSX. The authors are Al Klayton and Dan Sullivan and this dumb guy over here cannot find a way to contact either of them. This information would be of great assistance. Thanks a lot. Clarindo

My problem was solved with an excellent contribution from Reggie. The procedure is correct but neither FSCommander nor FSNavigator will read the additions from FS9 by just starting them up. They must have their own custom external database builder run in order to update it with the changes introduced. Just for the record. And my thanks to Reggie.

I have just read Venustus01 posting of November 12, 2011 on this subject and the use of ADE program. In the past I have done the same but currently I am unable add ILS to FS9 airport runways using Airport Designer Editor 9X I following the procedure steps outlined below: : File Open stock airport xxx Find Now + click on runway Add + ILS + Add + Ctrl C (compile) Save xxx in FS9\Addon Scenery\scenery Save (shows Airport Compiled) Save as airport xxx (In FS9\Addon Scenery\scenery) Save The files (both xxx.ade and xxx.bgl extensions) will appear in this folder but on starting either FSCommander or FSNavigator I find that no ILS has been added, even though the addon scenery is active for all previous addons I have introduced. Apparently the procedure which I recall using in the past is effectivelly functioning, but the end result is negative. In all instances I have always restarted both FS9 and FSCommander to check for results - disappointing ones, I must say. Could someone spot where or how this procedure is incorrect, or any tips on how to go about this situation. My appreciation for any such assistance.

Thanks a lot, Paul for your answer. I will follow the indicated procedure after accumulating a large amount of patience for the many sceneries I will have to go through individually. But it will be very valuable for my need. Best of luck, my friend. Clarindo

I am having trouble updating my FS9 addon sceneries in a computer running on Windows 7. These addons were copied from another computer which I have rfunning on XP with no problem. Since Fozzer mentioned FSNav and Windows 7 I am wondering if the problem lies there, and not with any of the addon sceneries I have been desperately trying to locate as a culprit. Could someone assist in telling me how to check these addon files for a possible corruption or how best to go about this problem?

Using AIBridge which came with the acquisition of FSCommander 9 I am experiencing the problem of frequent disconnect and difficulty in reconnecting AIBridge in multiplayer mode with FS2004. Wonder if anyone using these programs could give me a hint what could be the reason for my problem. Have tried many experiments (windowed mode, single monitor, no other program running) but the problem persists. Thanks for any help on this. Clarindo

Using FS9 with FSCommander version 9 and AIBridge I find that AIBridge disconnects quite frequently and after quite a few tries will just not connect to show the multiplayers which are on line. These appear on FSNavigator so there is not a problem of connection or incorrect IP. This happens both with FSNav on and without FSNav, just to make sure one would not interfere with the other. Has anyone experienced a similar problem which might help me with this most needed AIBridge program? Would very much appreaciate any information on ways to attempt to correct this situation at this end. Best to all of you. Clarindo I note that this is an MS FSX forum and as I am currently using FS9 please disregard if improperly addressed, as I could not find any other topic on this.

Appreciate the assistance and follow-up, Ronzie. Thanks to the download link and instructions on how to proceed which were provided by jd I have been able to update RC4 and am back flying with this very reliable and, in my view, indispensable program. Best of luck.

Ronzie: I very much appreciated your friendly and quite detailed posting concerning the updating of my current version RC 4.0.3675 which I acquired July 2010 to RC version 4.3845. After unsuccessful attempts I realize I am unable to follow up on this problem and will have to look for an alternative solution. Thanks again. Clarindo

Have just determined by reading thru FAQ that I had been using all this time the FS9 window display instead of the Adv Display window. For some reason the FS9 window and now it doesnt. However, using the Adv Display window everything seems to be OK. Clarindo

For a long time I have been using RC4 v 4.0.3675 with a registered FSUIPC v 3.129. Recently it would not start informing "fsuipc_wait, cant get FFC to change from 0 always 0". After many attempts I reinstalled RC4 which comes with FSUIPC v 3.50 and it now starts with the menu showing instead of letters a mixture of square and a few letters (some readable like FIX01). Where have I fouled up the installation of this excellent and, to me, indispensable program? By the way, the new RC4 version is an upgrade to the version I have or is it a new buy? Any assistance will be much appreciated. Clarindo

Wow! What a fantastic pool of experience and willingness to help I find here. However must outline 3 "unfortunately" responses:Ronzie - Unfortunatelu all my FSNav plans are .fsn formats.Jd - Wish they were .pln files, but again unfortunately they are .fsnProudfoot - Very opportune info but, unfortunately again:a) I would have to export plan by plan; :( not as many South American or Brazilian flight plans as I now have.Radar Contact (and Flight Sim Commander after FSNav was suspended) are, in my opinion, two most essential add-ons which I use, both - unfortunately - with different format plans to what I have.I believe there would be very many potential users (considering the huge acceptance FSNav had and still has) for a payware program which (wishful thinking...) would take .fsn format plans and crank out .pln formats, for instance.Guess I have 2 solutions left:1 - Just posted a regular mail to Santa Claus with a request such as above.2 - I will never again repeat a flight route and will print in huge font letters a special checklist for EXPORT PLAN BEFORE USING IT.Just hope to live long enough or fly enough to face up to this challenge.My very sincere thanks to all of you for your interest and prompt response.Wishing you the best, Clarindo

I have a very large number of flight plans created with FSNavigator which I would like to use for Radar Contact.The only way I understand exists is to start FS9, start FSNav, load each plan and then export each one individually so as to make it usable in RC.Considering the extended and cumbersome way of repeating such process so many times I am wondering if there is a better way which I am not familiar with nor have found in the forums and sites I have searched through.Any help on this will be much appreciated.Clarindo

Thanks, Dave. Have noted your suggestion for future use, as I tinker around so much with panels and aicraft that it wont be long before I willbe resorting to the experienced suggestions from all of you.Best of luck,Clarindo

Thanks a million for the reply. I am filing it for future reference - I would never have thought that effects should also be part of the back-up.I do really appreciate your assistance.

Looks like I am on the way to recovery. Recalled the old trick of deleting fs9.cfg file and letting FS9 do its own configuration on restart and I am back on the tarmac - missing a few display adjustments.That was a REAL BIG scare I just went through.Apologies for posting on a problem which now does not exist.Best of luck to all.

I have "attempted" to install World of AI and several packages to my FS9 which has so many aircraft, flight plans, gauges and panels which should have merited a better consideration. It is all my fault, nothing to do with the files installed. To add to the injury I also "installed" Traffic Tools and the Visibility program which wouldhide AI aircraft from the aircraft listing.Dumb me - now FS9 will not start and the dreaded message of a problem encountered and the need to close is all that is left.Have searched and read that traffic 030528.bgl in World/Scenery might be a problem - have removed it as well as all the WoaI .bgl files which I had installed. No go.Is that a final word, before I think of reinstalling FS9 which will never be the same again to me?Am thinking of saving the very large number of aircraft, the enormous amount of gauges in a separate hard disk before I face up to this very painful reinstallation and wondering if there are any other alternatives before I proceed. The number of programs which were there I will probably have to buy and/or download gradually over the next few months, I guess.I seem to recall once doing a reinstallation and FS9 Disk 1 had the question whether to reinstall or repair. Would hope that such opportunity might arise.I have checked for problems in my registry and both programs which I used have it scanned and cleared ok.In addition to the justified reprimand for trying to do something way beyond my ability (stupidity, yes), any information, suggestion. tips or even a word of condolence will be most welcome.