sdenton

Guys put FSX in as normal it goes in I activate it music plays it comes up and hits "FlyNow" it"s goes black squared upper left of the screen. You click anywhere it goes quiet. Guys I have all drivers up to date my card is up to date windows 11 is up to date. I'm lost put in 4 times the same thing HELP

Sorry to hear about the same thing I'm getting but so far no help at all. Which someone come up with some thing it frustrating

hey, guy I don't know all that much but may try putting in on your c drive the the sim.

scewed that it is an almost new Dell laptop and too much money in scenery and didn't care for the new one, plus another computer would be a necessity.

In my FSX it's trying load a flight plan all I get is the blue circle it some times it does load it but most of the time it takes a long time to load it up? Any ideas ? I don't ? Could use a little help Thanks

is their a fix? all I can find is try this, try that, etc... so far nothing has help or worked? very tired of trying BS that do not work.

Keep trying to figure out why CTD event viewer says g3d .dll can't find a fix ?? went on to other places using same aircraft no CTD?? Would like a fix but thoughts or ideas Thanks

In appcrashview it says that FSX has crashed and stop working due to and d3d9.dll it happens almost every time I fly.I do not see it crash or get an error box.But does take a long time time to start.I have checked an no d3d9.dll file in my main FSX folder.Jim here are some of the info from appcrashview again thanks for the help :fsx.exe Stopped working 8/27/2016 8:15:19 PM All Users 0xc0000005 0x000eb827 d3d9.dll 10.0.10586.494 D:\Microsoft Flight Simulator X\fsx.exe 29,478 C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\AppCrash_fsx.exe_3529c0a083ea7572d458e4e5c12fbe3723ec221_68a774f9_19f594cb\Report.wer fsx.exe Stopped working 8/28/2016 11:15:50 AM All Users 0xc0000005 0x000eb827 d3d9.dll 10.0.10586.494 D:\Microsoft Flight Simulator X\fsx.exe 26,080 C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\AppCrash_fsx.exe_3529c0a083ea7572d458e4e5c12fbe3723ec221_68a774f9_1e3b4c63\Report.wer fsx.exe Stopped working 8/27/2016 6:00:13 PM All Users 0xc0000005 0x00026d79 ntdll.dll 10.0.10586.306 D:\Microsoft Flight Simulator X\fsx.exe 26,186 C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\AppCrash_fsx.exe_cab916c34fce3e29ecb81ecdbc1956f41c34612_68a774f9_04edebc0\Report.wer fsx.exe Stopped working 8/27/2016 6:00:16 PM All Users 0xc000041d 0x00026d79 ntdll.dll 10.0.10586.306 D:\Microsoft Flight Simulator X\fsx.exe 26,186 C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\AppCrash_fsx.exe_cceb5eb11fac9a7431639635641f6ff02955872b_68a774f9_09b9f006\Report.wer

Thanks Jim I checked and no problems and I have no PMDG installed.Like I said I do not get an error box showing up it does take a while to boot up the program.Do you think that is causeing the long time????? Every thing else is working find?? Thanks for the reply..........Scott

No I'am not using any of those...

I have not seen an error come up but checking with appCrashview it does almost every time I fly and it does take a long time to come up about 4 mins. some times.I have Google this and can not find and fix???? It is d3d9.dll error crashes FSX ?? Some help please any body!!!!

Jim I at one time could drag in instuments over to my other monitor.But now thy all just go black and disappear?? I go to desktop right click it go to displays they both are set to extend these displays.Go to my nvidia control panel and go to setup multiple displays right click one displays and all it can do is clone???? Any idea.........Thanks

No it is not,I got an guy to look at it Monday,thanks for the reply

I have a lot of other problems had to format my drive and re install windows 10 FSX when in,but flying it is not right in the scenery was not right and real unstable...so I ran some diagnostic test and every thing else pass wit no problems.Got to the card it did not fail the test it said it could not run it??I think it is windows 10 and my alienware 51 just do not see eye to eye on some things?????

I ran an diagnostic test on my video card an it came up to the primary surface test it did not fail it said it could not run it???? So I went out and got and new one ran the the test same thing??? I'am running windows 10 in an Alienware -51 My driver is new and I jut put in windows 10.Could use some help...Thanks

I was having lost memory errors took out video driver would not go back in.Resit my computer the put in FSX got "Data error cyclic redundancy check". I was told by and microsoft store guy it was an RAID error,which I think I have.Did get FSX in and it works ok but when I put in the acceleration got the error.Ran Seatools all pass.In my JMB36X configuar it says no JMB36X RAID found????? Really need some help or is it all right to take RAID out or disable it????

Jim got FSX in but putting in acceleration got to putting in updating component registration that is when it sort of stall then the "Data Error cyclic redundancy check" I had a guy at the Microsoft store said that error had some thing to due with RAID ? and I am sorry I do not a thing about it I am reading about it now.But I check tested every thing and it came out ok all drivers are in and working.Any ideas??? Thanks Did some reading on this and I really do not need it,and thinking about disable it what do you think????

Jim did that one no help,do you think I really need and new disk???? I try to load it all the way default path an same error ?? I have been trying to put it on its own drive.

I start getting your computer is running out of memory,which I know it is not any way Took out windows 10 put it back in every thing is running great and pass all the test only thing came up was my video card could not run and Primary surface test.So I went out got and new card ran the test same thing.So I try to put in FSX and got the same error Data error cyclic redundancy check.So I replaced it with my old video card.The only thing I found on all my drives they are set up to run by "Authenticated users " ??? I switch to systems and go back and back on authenticated users??? After all this my problem is that error Data error cyclic redundancy check can not get their could use some help......thanks

I had a lot of problems with Microsoft free download windows 10.It cost me 4 trips up and down a flight of stairs(Alienware Area-51 desktop) and $208.00 for and full download of windows 10. FSX is a little slow and a little touchy.But now It is CTD many times, I will put an copy of it on here from my event logs also VECTOR is not in right and have about 5 FTX airports that need to be up dated: - Provider [ Name] Application Error - EventID 1000 [ Qualifiers] 0 Level 2 Task 100 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2015-08-12T02:41:20.000000000Z EventRecordID 1517 Channel Application Computer DESKTOP-UJ5CPRJ Security - EventData fsx.exe 10.0.61637.0 46fadb14 unknown 0.0.0.0 00000000 c0000005 50fc458d 1088 01d0d4a70f3bce7c E:\Microsoft Flight Simulator X\fsx.exe unknown 340d56d4-f796-4d8b-a2ad-f489bc2cc103 If some one could help?? Thanks a lot for any

I keep it real clean it not dust ,and the scenery is mostly Orbx I have check all my compounds every thing checks OK Thanks for the quick reply also here is the machine I have. CPU_Name: Intel® Core i7 CPU 960 @ 3.20GHz BIOS_Version1: A10 BIOS_Manufacturer: Alienware Video_Caption: NVIDIA GeForce GTX 580 Disk_Model: WDC WD10EALX-759BA0 Disk_Size: 1000 GB Disk_Partitions: 3 WDC WD5000AACS-61M6B2 [Hard drive] (500.11 GB) -- drive 0, Seagate External Drive USB Device [Hard drive] (160.04 GB) -- drive 2 PLDS DVD+-RW DH-24ABS SCSI CdRom OperatingSystem: MS Windows 7 Home Premium Edition Memory Module 6GB

After a time all my scenery goes fussy no detail I have to refresh scenery any ideas why this happens??? Thanks for any help