fletch

thank you, all sorted. thanks guys

Thank you Thank you, however there is no 777-300 ER to update on the PMDG Site, only the 777- 200 base SP1.

Hi all, Is there another way to get the new upgrade Version 1.10.6061 [777-300ER] as my Operation Center is telling me there is a new version available for my 777-300ER but everytime i hit the download button, nothing happens? I apologize if this has been noted before. thank you for your time and help. kind regards Andrew

Hello Mr Hahesh, thank you for your sugestion, however i chacked and have al;ready got this setting checked. I have also checked to see if i can see the lights in the PMDG 747. Looking from the cockpit and out side are good. thank you for your time and help kind regards

Hello, I have the new 777 and love it, however I am not able to see the landing lights or taxi lights from the cockpit view. i know they are working as i can see them in the outside view but not the inside view. any suggestions please. thank you very much for your help. kind regards Andrew

Thank you for your help Joshua,I knew i did something but could tell what it was i did.thanks again, problem solved..Andrew Fletcher

Hi there guys,i have this lead/ rope with a shoot of some sort attached to the top end of my PMDG 737-600/700/800,I must of picked it as an option some were with the FMS but becouse i don't know what it is and what it is for i don't know what option to pick to get rid of it.Any help will be appreciated thank you.thanks for your time and help,kind regardsAndrew Fletcher

Thanks guys,yep you are right, not your end, my end for sure. I just recently had to do a full computer format and reinstall everything, well that included my CA anti virus. The anti virus went back to it's default settings. All sorted now, thank you for your time. By the way, your new PMDG NGX is just owsome, (even on my old dinosour of a computer). once i upgrade (one day) i will be able to up the settings and see it in it's full glory. It flies so well. Well done guys, i know you worked hard at this, it really shows. kind regards Andrew Fletcher

Hi there guys,I am fairly new to PMDG forum and of late i have found that some of the topics that i am interested in reading are BLOCKED. Can someone please let me know why they may be blocked. This is what i mean: Blocked SiteYou cannot view this site. Access has been blocked for the following reason: based on the categoryURL: http://forum.avsim.net/topic/346223-freshly-painted-my-737-livery-listCategory: Dating There is about three in the NGX737 section that i have seen. thank you for your time and help.kind regardsAndrew

You guys at PMDG have worked hard for this baby.i think i might have to sit in the cockpit and park her somewhere for awhile just to soak it all in, and stay there till it gets dark then play with the lights. lolI can't wait to get one.Thanks Fletch

Hi guys, the screen shots i have seen so far are by far the best i have ever seen.I already fly the FSX version of the MD 11, 747-400 & 8i [the Dreamlifter too]and also the JS4100, I have a low/medium end spec computer, my only worry with this NGX is, will my computer be able to handle it? [are there settings for ALL types of spec computers or is it just for the higher end spec computers?] Thanks for your time and help.kind regardsAndrew Fletcher.

Thanks Heaps guys,I will have a look now to see what's going on.thanks again for your help.Fletch

Hi there all,I was hoping someone could help me please.I have FSX and run Windows XP.When i use FSX with or without Vatsim/FSInn on and all the Traffic sliders set to 100, i get no A1 Traffic both in the air or at the Airports.Is there a file that is missing?I never had this problem before.Thank you for your time and helpKind RegardsAndrew Fletcher [Fletch]

Hi there guys, i was just wondering which airliners in real life actually use the JS4100.It's such a great plane i want to see if my VA CEO will add it to the VA list.thanks for your time and help.kind regardsAndrew Fletcher.

thanks guys,yea, that was the first thing i thought of as it was acting as i was on 1/2 or 1/4 speed. so it's not a speed thing. [i think]where do search for the 1 FPS problem in FSX please.thanks heaps.Andrew Fletcher

Hi there guys, i was wondering if anyone knows why my FSX is now running like it is in slow motion and my frame rates are through the roof. When i set my frame rate to unlimted, it hits the high 300's but runs in slow motion [not like a slide show, just slow motion]anyone had this before?thanks, Andrew Fletcher

I also have it all working fine now.I do not have FSkeeper, so that wasn't the problem for me.After e-mailing Paul Gollnick From PMDG, he suggested to uninstall/reintall of the SP2 or Acceleration Pack (as some users are getting this type of behavior with a corrupt SP2 update file.)Therefore that's what i did but before i reinstalled the Acceleration Pack i renamed both my CFG file and DDL file. [to CFG2 & DDL2] I had to re-set my personal settings but it all works just fine now.So thanks to Pual it is all good. I hope it helps anyone else.Kind regardsAndrew

Thanks Dan,Will do.

Hi there guys,i cant seem to get my FMS to switch on, even with the motors running and full elec'thanks you for your time and helpkind regardsAndrew Fletcher

"Executable" ? what is that please?thanks for your time Dan.Kind regardsAndrew Fletcher

Sorry Dan for not knowing about this but how do i check that i have installed with the admin rights?Kind RegardsAndrew Fletcher

Hi there Dan,I have tried what you suggested by trying to fix the DLL.XML file but i seem to have the same problem still.It only happens with the JS41?the PMDG 747 400 x and level-d and e-jets aswell as the defualt aircrat are all working ok.here is a copy of my DLL.XML file after i followed all the intructions you sent my in your reply to my first forum.<?xml version="1.0" encoding="Windows-1252"?><SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>dll.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>PMDG Options</Name> <Disabled>False</Disabled> <Path>PMDG\DLLs\PMDGOptions.dll</Path> </Launch.Addon> <Launch.Addon> <Name>PMDG Events</Name> <Disabled>False</Disabled> <Path>PMDG\DLLs\PMDGEvents.dll</Path> </Launch.Addon> <Launch.Addon> <Name>PMDG Sounds</Name> <Disabled>False</Disabled> <Path>PMDG\DLLs\PMDGSounds.dll</Path> </Launch.Addon> <Launch.Addon> <Name>FSUIPC 4</Name> <Disabled>False</Disabled> <Path>Modules\FSUIPC4.dll</Path> </Launch.Addon> <Launch.Addon> <Name>Level-D Simulations</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>Modules\LVLD.dll</Path> </Launch.Addon></SimBase.Document>you might see if there is something that looks wrong?when i open it using Internet explorer it does not say any errors.?sorry for the hassles, i appreciate your time and help.thank you Kind RegardsAndrew Fletcher.

Thanks Dan for getting back to me,i will look at the thing you attatched and hopefully will follow it to the T and then i will let you know how i went with it.Thanks for helping.No, the second time i reinstalled the PMDG JS4100 and the update it all loaded onto FSX all ok. Although still with the same problem with FSX trying to load it.if it helps any, FSX did ask me if i trusted the DDL file and i accepted, but as i mentioned b4, it just gives me the picture and then stops befor it finishes the laoding.kind RegardsAndrew Fletcher [Fletch]

Hi there guys,Sorry to bother you all as this might sound like an easy solution. Due to me knowing nothing about computers it is not something i can work out.I have windows XP i run FSX. i have been enjoying the JS 4100 for about three months now and love it.i have the new version uplaoded aswell.However all of a sudden i can not seem to use the JS4100.When i go to free flight then choose an aircraft i can load any type that i have [defult and payware] except for the JS4100.i have uninstalled and reinstalled the JS and i have also deleted all the files left in FSX.everytime i try and use the JS4100 [load it from the free flight window or even if i try and change aircraft after a i have started a flight] i get the picture of the JS4100 in the free flight window but then the mouse changes into an hourglass and then FSX stops and wants to restart again.I have no idea why it has only just started to happen as all was fine b4.??????I am only guessing it has something to do with FSX not reconizing the JS4100 or something like that as the rest of my collection work ok.???please help as i already miss flying the JS4100. thank you in advance,kind regardsFletch

Hi there guys,just letting you know that the Qantas Link Livery (for the PMDG Jetstream 41) is ok now.just thought you might want to know.Fletch